On a Testing Methodology for the Mechanical Property Assessment of a New Low-Cost Titanium Alloy Derived from Synthetic Rutile

Mechanical property data of a low-cost titanium alloy derived directly from synthetic rutile is reported. A small-scale testing approach comprising consolidation via field-assisted sintering technology, followed by axisymmetric compression testing, has been designed to yield mechanical property data from small quantities of titanium alloy powder. To validate this approach and provide a benchmark, Ti-6Al-4V powder has been processed using the same methodology and compared with material property data generated from thermo-physical simulation software. Compressive yield strength and strain to failure of the synthetic rutile-derived titanium alloy were revealed to be similar to that of Ti-6Al-4V

The flow behavior and microstructural evolution of Ti-5Al-5Mo-5V-3Cr during subtransus isothermal forging

High-strength metastable beta alloys, for example, Ti-5Al-5Mo-5V-3Cr, have replaced steel as the material of choice for large components, such as the main truck beam on the latest generation of airframes. The production of these components is carried out by hot near-net-shape forging, during which process variable control is essential to achieve the desired microstructural condition and subsequent mechanical properties. The flow behavior and microstructural evolution during subtransus isothermal forging of Ti-5Al-5Mo-5V-3Cr has been investigated for two different starting microstructures and analysis has incorporated previously published results. The flow behavior, irrespective of initial microstructural condition, is found to be very similar at strains a parts per thousand yen0.35. It is thought that this is due to a common microstructural state being reached, where dynamic recovery of the beta phase is the dominating deformation mechanism. At strains < 0.35, the flow behavior is believed to be dominated by the morphology and volume fraction of the alpha phase. Small globular alpha particles are thought to have little effect on the flow behavior, while the observed flow softening is directly linked to the fragmentation of acicular alpha precipitates

Wüstite: electric, thermodynamic and optical properties of FeO

We report on a systematic optical investigation of w\"ustite. In addition, the sample under consideration, Fe0.93O, has been characterized in detail by electrical transport, dielectric, magnetic and thermodynamic measurements. From infrared reflectivity experiments, phonon properties, Drude-like conductivity contributions and electronic transitions have been systematically investigated. The phonon modes reveal a clear splitting below the antiferromagnetic ordering temperature, similar to observations in other transition-metal monoxides and in spinel compounds which have been explained in terms of a spin-driven Jahn-Teller effect. The electronic transitions can best be described assuming a crystal-field parameter Dq = 750 cm-1 and a spin-orbit coupling constant \lambda = 95 cm-1. A well defined crystal field excitation at low temperatures reveals significant broadening on increasing temperature with an overall transfer of optical weight into dc conductivity contributions. This fact seems to indicate a melting of the on-site excitation into a Drude behavior of delocalized charge carriers. The optical band gap in w\"ustite is close to 1.0 eV at room temperature. With decreasing temperatures and passing the magnetic phase transition we have detected a strong blue shift of the correlation-induced band edge, which amounts more than 15% and has been rarely observed in antiferromagnets.Comment: 13 pages, 10 figure