221 research outputs found
Effect of chemically modified Vulcan XC-72R on the performance of air-breathing cathode in a single-chamber microbial fuel cell
The catalytic activity of modified carbon powder (VulcanXC-72R) for oxygen reduction reaction (ORR) in an air-breathingcathode of amicrobialfuelcell (MFC) has been investigated. Chemical modification was carried out by using various chemicals, namely 5% nitric acid, 0.2 N phosphoric acid, 0.2 N potassium hydroxide and 10% hydrogen peroxide. Electrochemical study was performed for ORR of these modified carbon materials in the buffer solution pH range of 6–7.5 in the anodic compartment. Although, these treatments influenced the surface properties of the carbon material, as evident from the SEM-EDX analysis, treatment with H2PO4, KOH, and H2O2 did not show significant activity during the electrochemical test. The HNO3 treated Vulcan demonstrated significant ORR activity and when used in the single-chamber MFC cathode, current densities (1115 mA/m2, at 5.6 mV) greater than those for a Pt-supported un-treated carbon cathode were achieved. However, the power density for the latter was higher. Such chemicallymodified carbon material can be a cheaper alternative for expensive platinum catalyst used in MFC cathode construction
Robust radiocarbon dating of wood samples by high-sensitivity liquid scintillation spectroscopy in the 50–70 kyr age range
Although high-sensitivity liquid scintillation (LS) spectroscopy is theoretically capable of producing finite radiocarbon ages in the 50,000- to 70,000-yr range, there is little evidence in the literature that meaningful dates in this time period have been obtained. The pressing need to undertake calibration beyond 26 kyr has resulted in the regular publication of ¹⁴C results in excess of 50 kyr, yet very little effort has been made to demonstrate their accuracy or precision. There is a paucity of systematic studies of the techniques required to produce reliable dates close to background and the methods needed to assess contamination from either in situ sources or laboratory handling and processing. We have studied the requirements for producing accurate and reliable dates beyond 50 kyr. Laboratory procedures include optimization of LS spectrometers to obtain low and stable non-¹⁴C background count rates, use of low-background counting vials, large benzene volumes, long counting times, and preconditioning of vacuum lines. We also discuss the need for multiple analyses of a suitable material containing no original ¹⁴C (background blank) and the application of an appropriate statistical model to compensate for variability in background contamination beyond counting statistics. Accurate and reproducible finite ages >60 kyr are indeed possible by high-sensitivity LS spectroscopy, but require corroborating background blank data to be defensible
Nitric acid activation of graphite granules to increase the performance of the non-catalyzed oxygen reduction reaction (ORR) for MFC applications
Nitric acid and thermal activation of graphite granules were explored to increase the electrocatalytic performance of dissolved oxygen reduction at neutral pH for microbial fuel cell (MFC) applications. Electrochemical experiments showed an improvement of +400 mV in open circuit potential for graphite granules when they were activated. The improvement of ORR performance observed with activated granules was correlated to the increase of Brunauer–Emmett–Teller (BET) surface of the activated material and the emergence of nitrogen superficial groups revealed by X-ray photoelectron spectroscopy (XPS) analysis on its surface. The use of activated graphite granules in the cathodic compartment of a dual-chamber MFC led to a high open circuit voltage of 1050 mV, which is among one of the highest reported so far. The stable performance of this cathode material (current density of 96 A m−3 at +200 mV/Ag–AgCl) over a period of 10 days demonstrated its applicability as a cathode material without any costly noble metal
Bingham sealing and application in vacuum clamping
Vacuum clamping is extensively used in shell machining. In this paper a Bingham Sealing (BS) is presented and formulized based on Bingham plastic performance. The sealing capability of BS is evaluated in various cases. A new Bingham plastic is developed and the yield stress is measured. The performances of "O"ring sealing and BS with the developed Bingham plastic are compared to the static experiment. In this experiment the same vacuum is achieved and the distortion of the blade with BS is better than that with "O" ring sealing
Towards a radiocarbon calibration for oxygen isotope stage 3 using New Zealand kauri (Agathis australis)
It is well known that radiocarbon years do not directly equate to calendar time. As a result, considerable effort has been devoted to generating a decadally resolved calibration curve for the Holocene and latter part of the last termination. A calibration curve that can be unambiguously attributed to changes in atmospheric ¹⁴C content has not, however, been generated beyond 26 kyr cal BP, despite the urgent need to rigorously test climatic, environmental, and archaeological models. Here, we discuss the potential of New Zealand kauri (Agathis australis) to define the structure of the ¹⁴C calibration curve using annually resolved tree rings and thereby provide an absolute measure of atmospheric ¹⁴C. We report bidecadally sampled ¹⁴C measurements obtained from a floating 1050-yr chronology, demonstrating repeatable ¹⁴C measurements near the present limits of the dating method. The results indicate that considerable scope exists for a high-resolution ¹⁴C calibration curve back through OIS-3 using subfossil wood from this source
Recommended from our members
Road Transportable Analytical Laboratory (RTAL) system: Volume I. Final report
This report describes a portable laboratory system for the analysis of soils, ground water, and surface waters for the detection and quantification of hazardous materials, organics, and radioactive contaminants. The goal of the Road Transportable Analytical Laboratory (RTAL) is a sample throughput of 20 samples per day, providing a full range of analysis on each sample within 16 hours of preparation with high accuracy
Recommended from our members
Road Transportable Analytical Laboratory (RTAL) system: Volume II, Appendices A and B. Final report
The Road Transportable Analytical Laboratory (RTAL) provides a portable analytical system for the analysis of soils, ground water, and surface water for the detection of hazardous materials, metals, organics, and radioactive material. This report presents the data results for an aqueous sample VOA report and an aqueous sample SVOA report
Recommended from our members
Road Transportable Analytical Laboratory (RTAL) system: Volume III, Appendices C through J. Final report
The Road Transportable Analytical Laboratory (RTAL) provides a portabler laboratory for the analysis of soils, ground water, and surface water. This report presents data from a soils sample TCLP VOA and SVOA report, aqueous sample RCRA metals report, soils sample total and isotopic uranium report, SVOA sample analytical performance report, and and RCRA metal sample analytical performance report
Probing CP Violation with the Deuteron Electric Dipole Moment
We present an analysis of the electric dipole moment (EDM) of the deuteron as
induced by CP-violating operators of dimension 4, 5 and 6 including theta QCD,
the EDMs and color EDMs of quarks, four-quark interactions and the Weinberg
operator. We demonstrate that the precision goal of the EDM Collaboration's
proposal to search for the deuteron EDM, (1-3)\times 10^{-27} e cm, will
provide an improvement in sensitivity to these sources of one-two orders of
magnitude relative to the existing bounds. We consider in detail the level to
which CP-odd phases can be probed within the MSSM.Comment: 5 pages, 4 figures; precision estimates clarified, to appear in Phys.
Rev.
Antibiotics in childhood pneumonia: how long is long enough?
Improved access to healthcare, vaccines and treatment with antibiotics has reduced global mortality from childhood community-acquired pneumonia. However, as respiratory viruses are responsible for most episodes of pneumonia, important questions remain over who should receive these agents and the length of each treatment course. Worldwide concerns with increasing antibiotic resistance in respiratory pathogens and appeals for more prudent antibiotic prescribing provide further urgency to these clinical questions. Unfortunately, guidelines for treatment duration in particular are based upon limited (and often weak) evidence, resulting in national and international guidelines recommending treatment courses for uncomplicated pneumonia ranging from 3 to 10 days. The advantages of shortcourse
therapy include a lower risk of developing antibiotic resistance, improved adherence, fewer adverse drug effects,
and reduced costs. The risks include treatment failure, leading to increased short- or long-term morbidity, or even
death. The initial challenge is how to distinguish between bacterial and non-bacterial causes of pneumonia and then to
undertake adequately powered randomised-controlled trials of varying antibiotic treatment durations in children who
are most likely to have bacterial pneumonia. Meanwhile, healthcare workers should recognise the limitations of current
pneumonia treatment guidelines and remember that antibiotic course duration is also determined by the child’s
response to therapy
- …