59 research outputs found
Thickness Estimation of Epitaxial Graphene on SiC using Attenuation of Substrate Raman Intensity
A simple, non-invasive method using Raman spectroscopy for the estimation of
the thickness of graphene layers grown epitaxially on silicon carbide (SiC) is
presented, enabling simultaneous determination of thickness, grain size and
disorder using the spectra. The attenuation of the substrate Raman signal due
to the graphene overlayer is found to be dependent on the graphene film
thickness deduced from X-ray photoelectron spectroscopy and transmission
electron microscopy of the surfaces. We explain this dependence using an
absorbing overlayer model. This method can be used for mapping graphene
thickness over a region and is capable of estimating thickness of multilayer
graphene films beyond that possible by XPS and Auger electron spectroscopy
(AES).Comment: 14 pages, 9 figure
Novel cost-effective design for bio-volatilization studies in photosynthetic microalgae exposed to arsenic with emphasis on growth and glutathione modulation
A novel laboratory model was designed to study the arsenic (As) biotransformation potential of the microalgae Chlorella vulgaris and Nannochloropsis sp. and the cyanobacterium Anabaena doliolum. The Algae were treated under different concentrations of As(III) to check their growth, toxicity optimization, and volatilization potential. The results revealed that the alga Nannochloropsis sp. was better adopted in term of growth rate and biomass than C. vulgaris and A. doliolum. Algae grown under an As(III) environment can tolerate up to 200 μM As(III) with moderate toxicity impact. Further, the present study revealed the biotransformation capacity of the algae A. doliolum, Nannochloropsis sp., and Chlorella vulgaris. The microalga Nannochloropsis sp. volatilized a large maximum amount of As (4,393 ng), followed by C. vulgaris (4382.75 ng) and A. doliolum (2687.21 ng) after 21 days. The present study showed that As(III) stressed algae-conferred resistance and provided tolerance through high production of glutathione content and As-GSH chemistry inside cells. Thus, the biotransformation potential of algae may contribute to As reduction, biogeochemistry, and detoxification at a large scale
Measurement of the Optical Absorption Spectra of Epitaxial Graphene from Terahertz to Visible
We present experimental results on the optical absorption spectra of
epitaxial graphene from the visible to the terahertz (THz) frequency range. In
the THz range, the absorption is dominated by intraband processes with a
frequency dependence similar to the Drude model. In the near IR range, the
absorption is due to interband processes and the measured optical conductivity
is close to the theoretical value of . We extract values for the
carrier densities, the number of carbon atom layers, and the intraband
scattering times from the measurements
Ultrafast Relaxation Dynamics of Hot Optical Phonons in Graphene
Using ultrafast optical pump-probe spectroscopy, we study the relaxation
dynamics of hot optical phonons in few-layer and multi-layer graphene films
grown by epitaxy on silicon carbide substrates and by chemical vapor deposition
on nickel substrates. In the first few hundred femtoseconds after
photoexcitation, the hot carriers lose most of their energy to the generation
of hot optical phonons which then present the main bottleneck to subsequent
carrier cooling. Optical phonon cooling on short time scales is found to be
independent of the graphene growth technique, the number of layers, and the
type of the substrate. We find average phonon lifetimes in the 2.5-2.55 ps
range. We model the relaxation dynamics of the coupled carrier-phonon system
with rate equations and find a good agreement between the experimental data and
the theory. The extracted optical phonon lifetimes agree very well with the
theory based on anharmonic phonon interactions.Comment: 4 pages, 3 figure
Oxidation resistance of graphene-coated Cu and Cu/Ni alloy
The ability to protect refined metals from reactive environments is vital to
many industrial and academic applications. Current solutions, however,
typically introduce several negative effects, including increased thickness and
changes in the metal physical properties. In this paper, we demonstrate for the
first time the ability of graphene films grown by chemical vapor deposition to
protect the surface of the metallic growth substrates of Cu and Cu/Ni alloy
from air oxidation. SEM, Raman spectroscopy, and XPS studies show that the
metal surface is well protected from oxidation even after heating at 200
\degree C in air for up to 4 hours. Our work further shows that graphene
provides effective resistance against hydrogen peroxide. This protection method
offers significant advantages and can be used on any metal that catalyzes
graphene growth
Technique for the Dry Transfer of Epitaxial Graphene onto Arbitrary Substrates
In order to make graphene technologically viable, the transfer of graphene
films to substrates appropriate for specific applications is required. We
demonstrate the dry transfer of epitaxial graphene (EG) from the C-face of
4H-SiC onto SiO2, GaN and Al2O3 substrates using a thermal release tape. We
further report on the impact of this process on the electrical properties of
the EG films. This process enables EG films to be used in flexible electronic
devices or as optically transparent contacts.Comment: 8 pages, 4 figures and supplementary info regarding procedure for
transfe
Progress in Diamond Detector Development
Detectors based on Chemical Vapor Deposition (CVD) diamond have been used successfully in Luminosity and Beam Condition Monitors (BCM) in the highest radiation areas of the LHC. Future experiments at CERN will accumulate an order of magnitude larger fluence. As a result, an enormous effort is underway to identify detector materials that can operate under fluences of 1 · 1016 n cm−2 and 1 · 1017 n cm−2. Diamond is one candidate due to its large displacement energy that enhances its radiation tolerance. Over the last 30 years the RD42 collaboration has constructed diamond detectors in CVD diamond with a planar geometry and with a 3D geometry to extend the material's radiation tolerance. The 3D cells in these detectors have a size of 50 µm×50 µm with columns of 2.6 µm in diameter and 100 µm×150 µm with columns of 4.6 µm in diameter. Here we present the latest beam test results from planar and 3D diamond pixel detectors
Images - Coronary Sinus Thrombosis
A 63-days-old boy was evaluated for feeding difficulties, cyanosis and
breathlessness. Examination revealed a cyanosed child
(oxygen-saturation 48%) with left parasternal systolic murmur of grade
3/6. Echocardiography revealed transposition of great arteries, large
subpulmonic ventricular septal defect (VSD), patent foramen ovale
[PFO], small patent ductus arteriosus[PDA], malpositioned great
arteries with unregressed left ventricle and severe pulmonary artery
hypertension (PAH)
- …