Análise Experimental Da Contribuição Do Concreto Na Resistência Ao Cisalhamento Em Vigas Sem Armadura Transversal

There are many theories and empirical formulas for estimating the shear strength of reinforced concrete structures without transverse reinforcement. The security factor of any reinforced concrete structure, against a possible collapse, is that it does not depend on the tensile strength of the concrete and the formation of any collapse is ductile, thus giving advance warning. The cracking from tensile stress can cause breakage of the concrete and should be avoided at all cost, with the intent that any such breakage does not incur any type of failure within the structure. In the present research study, experiments were performed in order to analyze the complementary mechanisms of the shear strength of lattice beams of reinforced concrete frames without transverse reinforcement. The experimental program entails the testing of eight frames that were subjected to a simple bending process. Two concrete resistance classes for analyzing compressive strength were considered on the construction of frames, 20 MPa and 40 MPa. To resist the bending stresses, the beams of the frames are designed in domain 3 of the ultimate limit states. Different rates and diameters of longitudinal reinforcement were used, 1.32% and 1.55% with 12.5 mm diameter and 16.0 mm in longitudinal tensile reinforcement. From the obtained results, an analysis was made of the criteria already proposed for defining the norms pertinent to the portion of relevant contribution for the shear resistance mechanisms of concrete without the use of transverse reinforcement and the influence of the concrete resistance and longitudinal reinforcement rates established in the experimental numerical results.10116017

Structural Reinforcement through Liquid Encapsulation

The liquid inside a solid material is one of the most common composite materials in nature. The interface between solid–liquid plays an important role in unique deformation. Here, model systems of two polymers (polydimethylsiloxane–polyvinylidenefluoride) are used to make sphere of solid with liquid inside it

How risky are risk factors? An analysis of prenatal risk factors in patients participating in the congenital upper limb differences registry

PURPOSE: Risk factors for congenital upper limb differences (CoULDs) are often studied at the general population level. The CoULD registry provides a unique opportunity to study prenatal risk factors within a large patient sample. METHODS: All patients enrolled between June 2014 and March 2020 in the prospective CoULD registry, a national multicenter database of patients diagnosed with a CoULD, were included in the analysis. We analyzed self-reported, prenatal risk factors, including maternal smoking, alcohol use, recreational drug use, prescription drug use, gestational diabetes mellitus (GDM), and gestational hypertension. The outcome measures included comorbid medical conditions, proximal involvement of limb difference, bilateral involvement, and additional orthopedic conditions. Multivariable logistic regression was used to analyze the effect of the risk factors, controlling for sex and the presence of a named syndrome. RESULTS: In total, 2,410 patients were analyzed, of whom 72% (1,734) did not have a self-reported risk factor. Among the 29% (676) who did have at least 1 risk factor, prenatal maternal prescription drug use was the most frequent (376/2,410; 16%). Maternal prescription drug use was associated with increased odds of patient medical comorbidities (odds ratio [OR] = 1.43, CONCLUSIONS: Most caregivers (72%) did not report a risk factor during enrollment. However, reporting a risk factor was associated with patient medical and orthopedic comorbidities. Of note, GDM alone significantly increased the odds of both these outcome measures along with proximal limb differences. These findings highlight the ill-defined etiology of CoULDs but suggest that prenatal risk factors, especially GDM, are associated with a higher degree of morbidity. TYPE OF STUDY/LEVEL OF EVIDENCE: Prognostic III

High-K dielectric sulfur-selenium alloys.

Upcoming advancements in flexible technology require mechanically compliant dielectric materials. Current dielectrics have either high dielectric constant, K (e.g., metal oxides) or good flexibility (e.g., polymers). Here, we achieve a golden mean of these properties and obtain a lightweight, viscoelastic, high-K dielectric material by combining two nonpolar, brittle constituents, namely, sulfur (S) and selenium (Se). This S-Se alloy retains polymer-like mechanical flexibility along with a dielectric strength (40 kV/mm) and a high dielectric constant (K = 74 at 1 MHz) similar to those of established metal oxides. Our theoretical model suggests that the principal reason is the strong dipole moment generated due to the unique structural orientation between S and Se atoms. The S-Se alloys can bridge the chasm between mechanically soft and high-K dielectric materials toward several flexible device applications

Assessment of Surgical Procedural Time, Pedicle Screw Accuracy, and Clinician Radiation Exposure of a Novel Robotic Navigation System Compared With Conventional Open and Percutaneous Freehand Techniques: A Cadaveric Investigation

STUDY DESIGN: Cadaveric study. OBJECTIVE: To evaluate accuracy, radiation exposure, and surgical time of a new robotic-assisted navigation (RAN) platform compared with freehand techniques in conventional open and percutaneous procedures. METHODS: Ten board-certified surgeons inserted 16 pedicle screws at T10-L5 (n = 40 per technique) in 10 human cadaveric torsos. Pedicle screws were inserted with (1) conventional MIS technique (L2-L5, patient left pedicles), (2) MIS RAN (L2-L5, patient right pedicles), (3) conventional open technique (T10-L1, patient left pedicles), and (4) open RAN (T10-L1, patient right pedicles). Output included (1) operative time, (2) number of fluoroscopic images, and (3) screw accuracy. RESULTS: In the MIS group, compared with the freehand technique, RAN allowed for use of larger screws (diameter: 6.6 ± 0.6 mm vs 6.3 ± 0.5 mm; length: 50.3 ± 4.1 mm vs 46.9 ± 3.5 mm), decreased the number of breaches \u3e2 mm (0 vs 7), fewer fluoroscopic images (0 ± 0 vs 108.3 ± 30.9), and surgical procedure time per screw (3.6 ± 0.4 minutes vs 7.6 ± 2.0 minutes) (all CONCLUSION: RAN significantly improved accuracy and decreased radiation exposure in comparison to freehand techniques in both conventional open and percutaneous surgical procedures in cadavers. RAN significantly increased setup time compared with both conventional procedures

Association of radial longitudinal deficiency and thumb hypoplasia: An update using the CoULD registry

BACKGROUND: Deficiency of the radial aspect of the forearm and hand is the most common congenital longitudinal deficiency of the upper limb. Radial longitudinal deficiency is associated with several named syndromes. The purpose of the present study was to explore patterns of radial longitudinal deficiency and thumb hypoplasia in syndromes and to examine the severity of these differences across various syndromes. METHODS: Data were collected from the Congenital Upper Limb Differences (CoULD) registry. Congenital differences are classified in the registry with use of the Oberg-Manske-Tonkin (OMT) classification system. Diagnosis of a syndrome by a physician as noted in the CoULD registry was recorded. Thumb deficiency and radial deficiency were classified according to the modified versions of the Blauth criteria and the Bayne and Klug criteria, respectively. RESULTS: We identified 259 patients with 383 affected limbs with radial deficiency. Eighty-three of these patients had a diagnosed syndrome. The severity of radial deficiency was correlated with the severity of thumb deficiency. The Kendall tau coefficient indicated significant correlation between radial severity and thumb severity (tau = 0.49 [95% confidence interval = 0.40 to 0.57]; p \u3c 0.05). Subjects with a syndrome were twice as likely to have bilateral deficiency and 2.5 times more likely to have both radial and thumb deficiency compared with subjects without a syndrome. Subjects with VACTERL syndrome (vertebral defects, anal atresia, cardiac anomalies, tracheoesophageal fistula, renal anomalies, and limb defects) had patterns of thumb and radial deficiency similar to the general cohort, whereas subjects with Holt-Oram syndrome, TAR (thrombocytopenia absent radius) syndrome, and Fanconi anemia demonstrated varied presentations of thumb and radial deficiency. CONCLUSIONS: The present study investigated the characteristics of patients with radial longitudinal deficiency and thumb hypoplasia. Our results support the findings of previous research correlating the severity of radial deficiency with the severity of thumb deficiency. Furthermore, we identified characteristic features of patients with radial longitudinal deficiency and associated syndromes

Integration of fluorescence collection optics with a microfabricated surface electrode ion trap

We have successfully demonstrated an integrated optical system for collecting the fluorescence from a trapped ion. The system, consisting of an array of transmissive, dielectric micro-optics and an optical fiber array, has been intimately incorporated into the ion-trapping chip without negatively impacting trapping performance. Epoxies, vacuum feedthrough, and optical component materials were carefully chosen so that they did not degrade the vacuum environment, and we have demonstrated light detection as well as ion trapping and shuttling behavior comparable to trapping chips without integrated optics, with no modification to the control voltages of the trapping chip.Comment: 14 pages, 12 figure

Self-Organized Criticality in Developing Neuronal Networks

Recently evidence has accumulated that many neural networks exhibit self-organized criticality. In this state, activity is similar across temporal scales and this is beneficial with respect to information flow. If subcritical, activity can die out, if supercritical epileptiform patterns may occur. Little is known about how developing networks will reach and stabilize criticality. Here we monitor the development between 13 and 95 days in vitro (DIV) of cortical cell cultures (n = 20) and find four different phases, related to their morphological maturation: An initial low-activity state (≈19 DIV) is followed by a supercritical (≈20 DIV) and then a subcritical one (≈36 DIV) until the network finally reaches stable criticality (≈58 DIV). Using network modeling and mathematical analysis we describe the dynamics of the emergent connectivity in such developing systems. Based on physiological observations, the synaptic development in the model is determined by the drive of the neurons to adjust their connectivity for reaching on average firing rate homeostasis. We predict a specific time course for the maturation of inhibition, with strong onset and delayed pruning, and that total synaptic connectivity should be strongly linked to the relative levels of excitation and inhibition. These results demonstrate that the interplay between activity and connectivity guides developing networks into criticality suggesting that this may be a generic and stable state of many networks in vivo and in vitro