Cryogenic light detectors with enhanced performance for rare events physics

We have developed and tested a new way of coupling bolometric light detectors to scintillating crystal bolometers based upon simply resting the light detector on the crystal surface, held in position only by gravity. This straightforward mounting results in three important improvements: (1) it decreases the amount of non-active materials needed to assemble the detector, (2) it substantially increases the light collection efficiency by minimizing the light losses induced by the mounting structure, and (3) it enhances the thermal signal induced in the light detector thanks to the extremely weak thermal link to the thermal bath. We tested this new technique with a 16 cm$^2$ Ge light detector with thermistor readout sitting on the surface of a large TeO$_2$ bolometer. The light collection efficiency was increased by greater than 50\% compared to previously tested alternative mountings. We obtained a baseline energy resolution on the light detector of 20~eV RMS that, together with increased light collection, enabled us to obtain the best $\alpha$ vs $\beta/\gamma$ discrimination ever obtained with massive TeO$_2$ crystals. At the same time we achieved rise and decay times of 0.8 and 1.6 ms, respectively. This superb performance meets all of the requirements for the CUPID (CUORE Upgrade with Particle IDentification) experiment, which is a 1-ton scintillating bolometer follow up to CUORE.Comment: 6 pages, 4 figure

Spatial and temporal characterization of a Bessel beam produced using a conical mirror

We experimentally analyze a Bessel beam produced with a conical mirror, paying particular attention to its superluminal and diffraction-free properties. We spatially characterized the beam in the radial and on-axis dimensions, and verified that the central peak does not spread over a propagation distance of 73 cm. In addition, we measured the superluminal phase and group velocities of the beam in free space. Both spatial and temporal measurements show good agreement with the theoretical predictions.Comment: 5 pages, 6 figure

New experimental limits on the alpha decays of lead isotopes

For the first time a PbWO4 crystal was grown using ancient Roman lead and it was run as a cryogenic detector. Thanks to the simultaneous and independent read-out of heat and scintillation light, the detector was able to discriminate beta/gamma interactions with respect to alpha particles down to low energies. New more stringent limits on the alpha decays of the lead isotopes are presented. In particular a limit of T_{1/2} > 1.4*10^20 y at a 90% C.L. was evaluated for the alpha decay of 204Pb to 200Hg

TeO2_2 bolometers with Cherenkov signal tagging: towards next-generation neutrinoless double beta decay experiments

CUORE, an array of 988 TeO$_2$ bolometers, is about to be one of the most sensitive experiments searching for neutrinoless double-beta decay. Its sensitivity could be further improved by removing the background from $\alpha$ radioactivity. A few years ago it has been pointed out that the signal from $\beta$s can be tagged by detecting the emitted Cherenkov light, which is not produced by $\alpha$s. In this paper we confirm this possibility. For the first time we measured the Cherenkov light emitted by a CUORE crystal, and found it to be 100 eV at the $Q$-value of the decay. To completely reject the $\alpha$ background, we compute that one needs light detectors with baseline noise below 20 eV RMS, a value which is 3-4 times smaller than the average noise of the bolometric light detectors we are using. We point out that an improved light detector technology must be developed to obtain TeO$_2$ bolometric experiments able to probe the inverted hierarchy of neutrino masses.Comment: 5 pages, 4 figures. Added referee correction

An integrated 0D/1D/3D numerical framework to predict performance, emissions, knock and heat transfer in ICEs fueled with NH3–H2 mixtures: The conversion of a marine Diesel engine as case study

In the maritime transportation, e-fuels represent a valid alternative to fossil energy sour- ces, in order to accomplish the European Union goals in terms of climate neutrality. Among the e-fuels, the ammonia-hydrogen mixtures can play a leading role, as the combination of the two allows to exploit the advantages of each one, simultaneously compensating their gaps. The main goal of the present publication is the proposal of a robust numerical frame- work based on 0D, 1D and 3D tools for CFD analyses of internal combustion engines fueled with ammonia-hydrogen mixtures. The 1D engine model provides boundary conditions for the multi-dimensional in- vestigations and estimates the overall engine performance. 3D in-cylinder detailed ana- lyses are proficiently used to predict combustion efficiency (via the well-established G-equation model supported by laminar flame speed correlations for both ammonia and hydrogen) and emissions (with a detailed chemistry based approach). Heat transfer and knock tendency are evaluated as well, by in-house developed models. As for the 0D/1D chemical kinetics calculations, firstly they support 3D analyses (for example via the gen- eration of ignition delay time tables). Moreover, they allow insights on aspects such as NOx formation, to individuate mixture qualities able to strongly reduce the emissions