3,384 research outputs found
A Comparative Numerical Study on GEM, MHSP and MSGC
In this work, we have tried to develop a detailed understanding of the
physical processes occurring in those variants of Micro Pattern Gas Detectors
(MPGDs) that share micro hole and micro strip geometry, like GEM, MHSP and MSGC
etc. Some of the important and fundamental characteristics of these detectors
such as gain, transparency, efficiency and their operational dependence on
different device parameters have been estimated following detailed numerical
simulation of the detector dynamics. We have used a relatively new simulation
framework developed especially for the MPGDs that combines packages such as
GARFIELD, neBEM, MAGBOLTZ and HEED. The results compare closely with the
available experimental data. This suggests the efficacy of the framework to
model the intricacies of these micro-structured detectors in addition to
providing insight into their inherent complex dynamical processes
Beyond single-photon localization at the edge of a Photonic Band Gap
We study spontaneous emission in an atomic ladder system, with both
transitions coupled near-resonantly to the edge of a photonic band gap
continuum. The problem is solved through a recently developed technique and
leads to the formation of a ``two-photon+atom'' bound state with fractional
population trapping in both upper states. In the long-time limit, the atom can
be found excited in a superposition of the upper states and a ``direct''
two-photon process coexists with the stepwise one. The sensitivity of the
effect to the particular form of the density of states is also explored.Comment: to appear in Physical Review
Non-Markovian Decay of a Three Level Cascade Atom in a Structured Reservoir
We present a formalism that enables the study of the non-Markovian dynamics
of a three-level ladder system in a single structured reservoir. The
three-level system is strongly coupled to a bath of reservoir modes and two
quantum excitations of the reservoir are expected. We show that the dynamics
only depends on reservoir structure functions, which are products of the mode
density with the coupling constant squared. This result may enable pseudomode
theory to treat multiple excitations of a structured reservoir. The treatment
uses Laplace transforms and an elimination of variables to obtain a formal
solution. This can be evaluated numerically (with the help of a numerical
inverse Laplace transform) and an example is given. We also compare this result
with the case where the two transitions are coupled to two separate structured
reservoirs (where the example case is also analytically solvable)
New approach to 3D electrostatic calculations for micro-pattern detectors
We demonstrate practically approximation-free electrostatic calculations of
micromesh detectors that can be extended to any other type of micropattern
detectors. Using newly developed Boundary Element Method called Robin Hood
Method we can easily handle objects with huge number of boundary elements
(hundreds of thousands) without any compromise in numerical accuracy. In this
paper we show how such calculations can be applied to Micromegas detectors by
comparing electron transparencies and gains for four different types of meshes.
We demonstrate inclusion of dielectric material by calculating the electric
field around different types of dielectric spacers
Recommended from our members
Non-dimensionalisation parameters for predicting the cooling effectiveness of droplets impinging on moderate temperature solid surfaces
The conjugate problem of fluid flow and heat transfer during the impact of water droplets onto a heated surface is studied numerically using the Volume of Fluid (VOF) methodology; adaptive grid refinement is used for increased resolution at the droplet moving interface. The phenomenon is assumed to be 2D-axisymmetric and the wall temperature is moderated to prevent the onset of nucleate boiling. Parametric studies examine the effect of Weber number, droplet size, wall initial temperature and liquid thermal properties on the cooling process of the heated plate during the impaction period. The main variables describing the evolution of the phenomenon are non-dimensionalised with expressions arising from the transient conduction theory. It is proved that for all cases examined, these non-dimensional expressions can be grouped together for describing the hydrodynamic and thermal behavior in a similar manner. Additionally, semi-analytic expressions are derived, which, for a given range of variation, describe the spatial distribution and the temporal evolution of the temperature of the wall as well also the heat flux absorbed from the droplet, cooling effectiveness and mean droplet temperature
Decision and function problems based on boson sampling
Boson sampling is a mathematical problem that is strongly believed to be
intractable for classical computers, whereas passive linear interferometers can
produce samples efficiently. So far, the problem remains a computational
curiosity, and the possible usefulness of boson-sampling devices is mainly
limited to the proof of quantum supremacy. The purpose of this work is to
investigate whether boson sampling can be used as a resource of decision and
function problems that are computationally hard, and may thus have
cryptographic applications. After the definition of a rather general
theoretical framework for the design of such problems, we discuss their
solution by means of a brute-force numerical approach, as well as by means of
non-boson samplers. Moreover, we estimate the sample sizes required for their
solution by passive linear interferometers, and it is shown that they are
independent of the size of the Hilbert space.Comment: Close to the version published in PR
Effects of interatomic collisions on atom laser outcoupling
We present a computational approach to the outcoupling in a simple
one-dimensional atom laser model, the objective being to circumvent
mathematical difficulties arising from the breakdown of the Born and Markov
approximations. The approach relies on the discretization of the continuum
representing the reservoir of output modes, which allows the treatment of
arbitrary forms of outcoupling as well as the incorporation of non-linear terms
in the Hamiltonian, associated with interatomic collisions. By considering a
single-mode trapped condensate, we study the influence of elastic collisions
between trapped and free atoms on the quasi steady-state population of the
trap, as well as the energy distribution and the coherence of the outcoupled
atoms.Comment: 25 pages, 11 figures, to appear in J. Phys.
Recommended from our members
Numerical investigation of heavy fuel oil droplet breakup enhancement with water emulsions
The heating and explosive boiling leading to fragmentation of immiscible heavy fuel oil-water droplets, termed as W/HFO emulsions, is predicted numerically by solving the incompressible Navier-Stokes and energy equations alongside with a set of three VoF transport equations separating the interface of co-existing HFO, water liquid and water vapour fluid phases. Model predictions suggest that explosive boiling of the water inside the surrounding HFO, ought to their different boiling points, accelerates droplet breakup; this process is termed as either puffing or micro-explosion. In contrast to past studies which predefine the presence of vapor bubbles inside the water droplet, this is predicted here with a phenomenological model based on local temperature and superheat degree. Following their formation, the growth rate of the bubbles is computed with OCASIMAT phase-change algorithm. Moreover, the fuel droplet is simultaneously subjected to convective air flow which further contributes to its deformation. As a result, the performed simulations quantify the relative time scales of the aerodynamic-induced and the emulsion-induced breakup mechanisms. The conditions examined refer to a highly viscous emulsified heavy fuel oil droplet in a gas phase having fixed temperature and pressure equal to 1000 K and 30 bar, respectively. Initially, a benchmark case demonstrates the detailed mechanisms taking place, concluding that droplet fragmentation occurs only at a part of the fuel-air interface, resembling characteristics similar to puffing. Next, a parametric study with Weber number (Oh=0.9,We<200) shows that puffing process can speed up to 10 times the breakup of the droplet relative to aerodynamic breakup
Recommended from our members
Single droplet impacts onto deposited drops. Numerical analysis and comparison
The impact of a spherical water droplet onto a stationary sessile droplet lying on a solid wall is studied numerically using the volume-of-fluid methodology. The governing Navier-Stokes equations are solved both for the gas and liquid phase coupled with an additional equation for the transport of the liquid interface. An unstructured numerical grid is used along with an adaptive local grid refinement technique, which enhances the accuracy of the numerical results along the liquid-gas interface and decreases the computational cost. The stationary sessile droplet has been created from the prior impact of one or two water droplets falling onto the solid wall, while two solid walls have been studied−an aluminum substrate and a glass substrate. The material of the wall plays an important role because it has an impact on the droplet's wetting behavior. The numerical model is validated against corresponding experimental data presented in the first part of the present work (Nikolopoulos et al., 2010), showing good agreement. Furthermore, the numerical investigation sheds light on the governing physics of the phenomenon
- …