28,788 research outputs found
Transformations between HCLP and PCSP
We present a general methodology for transforming between HCLP and PCSP in both directions. HCLP and PCSP each have advantages when modelling problems, and each have advantages when implementing models and solving them. Using the work presented in this paper, the appropriate paradigm can be used for each of these steps, with a meaning-preserving transformation in between if necessary
Open Access Policy: Numbers, Analysis, Effectiveness
The PASTEUR4OA project analyses what makes an Open Access (OA) policy
effective. The total number of institutional or funder OA policies worldwide is
now 663 (March 2015), over half of them mandatory. ROARMAP, the policy
registry, has been rebuilt to record more policy detail and provide more
extensive search functionality. Deposit rates were measured for articles in
institutions' repositories and compared to the total number of WoS-indexed
articles published from those institutions. Average deposit rate was over four
times as high for institutions with a mandatory policy. Six positive
correlations were found between deposit rates and (1) Must-Deposit; (2)
Cannot-Waive-Deposit; (3) Deposit-Linked-to-Research-Evaluation; (4)
Cannot-Waive-Rights-Retention; (5) Must-Make-Deposit-OA (after allowable
embargo) and (6) Can-Waive-OA. For deposit latency, there is a positive
correlation between earlier deposit and (7) Must-Deposit-Immediately as well as
with (4) Cannot-Waive-Rights-Retention and with mandate age. There are not yet
enough OA policies to test whether still further policy conditions would
contribute to mandate effectiveness but the present findings already suggest
that it would be useful for current and future OA policies to adopt the seven
positive conditions so as to accelerate and maximise the growth of OA.Comment: 49 pages, 21 figures, 15 tables. Pasteur4OA Work Package 3 report:
Open Access policies 201
Revisiting the 1954 Suspension Experiments of R. A.Bagnold
In 1954 R. A. Bagnold published his seminal findings on the rheological properties of a liquid-solid suspension. Although this work has been cited extensively over the last
fifty years, there has not been a critical review of the experiments. The purpose of this study is to examine the work and to suggest an alternative reason for the experimental findings. The concentric cylinder rheometer was designed to measure simultaneously the shear and normal forces for a wide range of solid concentrations, fluid viscosities and shear rates. As presented by Bagnold, the analysis and experiments demonstrated that the shear and normal forces depended linearly on the shear rate in the 'macroviscous' regime; as the grain-to-grain interactions increased in the 'grain-inertia' regime, the stresses depended on the square of the shear rate and were independent of the fluid viscosity. These results, however, appear to be dictated by the design of the experimental facility. In Bagnold's experiments, the height (h) of the rheometer was relatively short compared to the spacing (t) between the rotating outer and stationary inner cylinder (h/t=4.6). Since the top and bottom end plates rotated with the outer cylinder, the flow contained two axisymmetric counter-rotating cells in which flow moved outward along the end plates and inward through the central region of the annulus. At higher Reynolds numbers, these cells contributed significantly to the measured torque, as demonstrated by comparing Bagnold's pure-fluid measurements with studies on laminar-to-turbulent transitions that pre-date the 1954 study. By accounting for the torque along the end walls, Bagnold's shear stress measurements can be estimated by modelling the liquid-solid mixture as a Newtonian fluid with
a corrected viscosity that depends on the solids concentration. An analysis of the normal stress measurements was problematic because the gross measurements were not reported and could not be obtained
Remote sensing of atmospheric winds using a coherent, CW lidar and speckle-turbulence interaction
Speckle turbulence interaction has the potential for allowing single ended remote sensing of the path averaged vector crosswind in a plane perpendicular to the line of sight to a target. If a laser transmitter is used to illuminate a target, the resultant speckle field generated by the target is randomly perturbed by the atmospheric turbulence as it propagates back to the location of the transmitter-receiver. When a cross wind is present, this scintillation pattern will move with time across the receiver. A continuous wave (cw) laser transmitter of modest power level in conjunction with optical heterodyne detection was used to exploit the speckel turbulence interaction and measure the crosswind. The use of a cw transmitter at 10.6 microns and optical heterodyne detection has many advantages over direct detection and a double pulsed source in the visible or near infrared. These advantages include the availability of compact, reliable and inexpensive transmitters, better penetration of smoke, dust and fog; stable output power; low beam pointing jitter; and considerably reduced complexity in the receiver electronics
Solid metabolic waste transport and stowage investigation
The basic Waste Collection System (WCS) design under consideration utilized air flow to separate the stool from the WCS user and to transport the fecal material to a slinger device for subsequent deposition on a storage bowel. The major parameters governing stool separation and transport were found to be the area of the air inlet orifices, the configuration of the air inlet orifice and the transport air flow. Separation force and transport velocity of the stool were studied. The developed inlet orifice configuration was found to be an effective design for providing fecal separation and transport. Simulated urine tests and female user tests in zero gravity established air flow rates between 0.08 and 0.25 cu sm/min (3 and 9 scfm) as satisfactory for entrapment, containment and transport of urine using an urinal. The investigation of air drying of fecal material as a substitute for vacuum drying in a WCS breadboard system showed that using baseline conditions anticipated for the shuttle cabin ambient atmosphere, flow rates of 0.14 cu sm/min (5 cfm) were adequate for drying and maintaining biological stability of the fecal material
Collisions with ice-volatile objects: Geological implications
The collision of the Earth with extra-terrestrial ice-volatile bodies is proposed as a mechanism to produce rapid changes in the geologic record. These bodies would be analogs of the ice satellites found for the Jovian planets and suspected for comets and certain low density bodies in the Asteroid belt. Five generic end-members are postulated: (1) water ice; (2) dry ice: carbon-carbon dioxide rich, (3) oceanic (chloride) ice; (4) sulfur-rich ice; (5) ammonia hydrate-rich ice; and (6) clathrate: methane-rich ice. Due to the volatile nature of these bodies, evidence for their impact with the Earth would be subtle and probably best reflected geochemically or in the fossil record. Actual boloids impacting the Earth may have a variable composition, generally some admixture with water ice. However for discussion purposes, only the effects of a dominant component will be treated. The general geological effects of such collisions, as a function of the dominant component would be: (1) rapid sea level rise unrelated to deglaciation, (2) decreased oceanic pH and rapid climatic warming or deglaciation; (3) increased paleosalinities; (4) increased acid rain; (5) increased oceanic pH and rapid carbonate deposition; and (6) rapid climatic warming or deglaciation
Stellar Motion around Spiral Arms: Gaia Mock Data
We compare the stellar motion around a spiral arm created in two different
scenarios, transient/co-rotating spiral arms and density-wave-like spiral arms.
We generate Gaia mock data from snapshots of the simulations following these
two scenarios using our stellar population code, SNAPDRAGONS, which takes into
account dust extinction and the expected Gaia errors. We compare the observed
rotation velocity around a spiral arm similar in position to the Perseus arm,
and find that there is a clear difference in the velocity features around the
spiral arm between the co-rotating spiral arm and the density-wave-like spiral
arm. Our result demonstrates that the volume and accuracy of the Gaia data are
sufficient to clearly distinguish these two scenarios of the spiral arms.Comment: 5 pages, 1 figure, to appear in the proceedings of "The Milky Way
Unravelled by Gaia: GREAT Science from the Gaia Data Releases", Barcelona,
1-5 December 2014, eds. N. Walton, F. Figueras, C. Soubira
Weight management for overweight and obese men delivered through professional football clubs : a pilot randomized trial
Peer reviewedPublisher PD
- …