75 research outputs found
AC Josephson properties of phase slip lines in wide tin films
Current steps in the current-voltage characteristics of wide superconducting
Sn films exposed to a microwave irradiation were observed in the resistive
state with phase slip lines. The behaviour of the magnitude of the steps on the
applied irradiation power was found to be similar to that for the current steps
in narrow superconducting channels with phase slip centers and, to some extent,
for the Shapiro steps in Josephson junctions. This provides evidence for the
Josephson properties of the phase slip lines in wide superconducting films and
supports the assumption about similarity between the processes of phase slip in
wide and narrow films.Comment: 7 pages, 2 figures, to be published in Supercond. Sci. Techno
Optically Pumped Polarized He Ion Source Development for RHIC/EIC
The proposed polarized He acceleration in RHIC and the future
Electron-Ion Collider will require about ions in the source
pulse. A new technique had been proposed for production of high intensity
polarized He ion beams. It is based on ionization and accumulation
of the He gas (polarized by metastability-exchange optical pumping and in
the 5 T high magnetic field) in the existing Electron Beam Ion Source (EBIS). A
novel He cryogenic purification and storage technique was developed to
provide the required gas purity. An original gas refill and polarized He
gas injection to the EBIS long drift tubes, (which serves as the storage cell)
were developed to ensure polarization preservation. An infrared laser system
for optical pumping and polarization measurements in the high 3--5 T field has
been developed. The He polarization 80--85\% (and sufficiently long
min relaxation time) was obtained in the \lq\lq{open}\rq\rq\ cell
configuration with refilling valve tube inlet and isolation valve closed. The
development of the spin-rotator and He He absolute nuclear polarimeter
at 6 MeV He beam energy is also presented.Comment: 9 pages, 11 figure
Low-temperature heat capacity of fullerite C₆₀ doped with nitrogen
The heat capacity Cm of polycrystalline fullerite C₆₀ doped with nitrogen has been measured in
the temperature interval 2–13 K. The contributions to the heat capacity from translational lattice
vibrations (Debye contribution), orientational vibrations of the C₆₀ molecules (Einstein contribution),
and from the motion of the N₂ molecules in the octahedral cavities of the C₆₀ lattice have
been estimated. However, we could not find (beyond the experimental error limits) any indications
of the first-order phase transformation that had been detected earlier in the dilatometric investigation
of the orientational N₂–C₆₀ glass. A possible explanation of this fact is proposed
CERN PS laser ion source development
CERN, together with ITEP and TRINITI (Russia), is developing a CO2 laser ion source. The key design parameters are: 1.4 1010 ions of Pb25+ in a pulse of 5.5 ms, with a 4-rms emittance of 0.2 10-6 rad m, working at a repetition rate of 1 Hz. This device is considered as one candidate source for LHC heavy ion operation. The status of the laser development, the experimental set-up of the source consisting of the target area and its illumination, the plasma expansion area and extraction, beam transport and ion pre-acceleration by an RFQ, will be given
Методы консолидации научных сервисов
The article discusses methods of consolidating scientific services of a digital platform for integrating a set of scientific services for various fields of science for conducting interdisciplinary research. Solutions for creating consolidated services can be widely used for multilevel, multiscale modeling in the field of materials science, which provides complex modeling at several levels of the hierarchy. Currently, this problem is being solved by creating multicomponent hierarchical software systems on corporate computing systems. With the advent of high-performance cloud computing platforms, it will be possible to order services for solving particular modeling problems as a scientific service. In this case, the tasks of complex hierarchical modeling will be solved by a consolidated service - a service providing sequential-parallel execution of complex modeling components in the form of specialized scientific services. The description of the processes for the provision of scientific services is based on the research methodology and is a research plan (the work process mapping), which describes a set of operations related to time and includes a list of necessary resources for their implementation. In modern conditions of the development of a microservice approach to the creation of computing systems and the evolution of the Service Oriented Architecture and of the Enterprise Service Bus integration, special attention is paid to the problems of efficient integration of platform services. The paper proposes to supplement the existing description of a scientific service with the possibility of ordering a third-party service based on agile integration. This approach will allow at the present stage of development of service architectures to overcome the shortcomings of centralized systems such as Enterprise Service Bus and take advantage of the elasticity of cloud computing and a microservice approach to creating information and computing systems.В работе рассматриваются методы консолидации научных сервисов цифровой платформы для интеграции совокупности научных услуг из различных областей науки для проведения междисциплинарных исследований. Решения для создания консолидированных сервисов могут найти широкое применение для многоуровневого, многомасштабного моделирования в области материаловедения, предусматривающего комплексное моделирование на нескольких уровнях иерархии. В настоящее время эта задача решается созданием многокомпонентных иерархических программных комплексов на корпоративных вычислительных средствах. С появлением высокопроизводительных облачных вычислительных платформ появится возможность получать услуги по решению частных задач моделирования в виде научных сервисов. Задачи комплексного иерархического моделирования в этом случае будут решаться консолидированным сервисом — сервисом, обеспечивающим последовательно-параллельное выполнение компонентов комплексного моделирования в виде специализированных научных сервисов. Описание процессов выполнения научного сервиса основано на методике исследования и представляет собой план исследования (технологическую карту исследования), описывающий необходимый для выполнения сервиса взаимоувязанный по времени набор операций и перечень ресурсов для их выполнения. В современных условиях развития микросервисного подхода к созданию вычислительных систем, эволюции сервис-ориентированных архитектур и децентрализации корпоративных интеграционных шин проблемам эффективной интеграции платформенных сервисов уделяется особое внимание. В работе предлагается дополнить существующее описание научного сервиса возможностью заказа стороннего сервиса на основе механизмов гибкой (agile) интеграции. Этот подход позволит на современном этапе развития сервисных архитектур преодолеть недостатки централизованных систем типа корпоративных интеграционных шин и воспользоваться преимуществами эластичности облачных вычислений и микросервисного подхода к созданию информационно-вычислительных систем
Вопросы выбора показателей эффективности функционирования высокопроизводительного вычислительного комплекса на примере ЦКП «Информатика» ФИЦ ИУ РАН
This article discusses a methodology for assessing the effectiveness of a high-performance research platform. The assessment is carried out for the example of the "Informatika" Center for Collective Use (CCU) established at the Federal Research Center of the Institute of Management of the Russian Academy of Sciences, for solving new materials synthesis problems. The main objective of the "Informatika" Center for Collective Use is to conduct research using the software and hardware of the data center of the FRC IU RAS, including for the benefit of third-party organizations and research teams. The general characteristics of the "Informatika" Center for Collective Use are presented, including the main characteristics of its scientific equipment, work organization and capabilities. The hybrid high-performance computing cluster of the FRC CSC RAS (HHPCC) is part of the data center of the FRC IU RAS and also part of the “Informatika” Center for Collective Use. HHPCC provides computing resources in the form of cloud services as software (SaaS) and platform (PaaS) services. With the aid of special technologies, scientific services are delivered to researchers in the form of subject-oriented applications. Based on the analysis of the structure and operation principles of the Informatika Center, key performance indicators of the Center have been developed taking into account its specific tasks in order to characterize its various activity aspects (development, activities and performance). CCU efficiency evaluation implies calculation, on the basis of the developed indicators, of overall (generalized) indicators that characterize the CCU operation efficiency in various areas. An integral indicator is also calculated showing the overall CCU efficiency. To develop the overall performance indicators and the integral performance indicator, it is suggested to use the methods of weighted average and analysis of hierarchies. The procedure of determining partial performance indicators has been considered. Specific features of the choice of CCU performance indicators for solving new materials synthesis problems have been identified that characterize computing complex capabilities in the creation of a virtualization environment (peak performance of a computing system, real performance of a computing system on specialized tests, equipment loading with applied tasks and program code efficiency).В статье рассматривается методика, позволяющая оценить эффективность высокопроизводительной платформы для научных исследований. Оценка проводится на примере центра коллективного пользования (ЦКП) «Информатика», ФИЦ ИУ РАН, при решении задач синтеза новых материалов. Основной задачей ЦКП «Информатика» является проведение научных исследований с использованием программно-технических средств ЦОД ФИЦ ИУ РАН, в том числе в интересах сторонних организаций и научных коллективов. Представлена общая характеристика ЦКП «Информатика» включая основные характеристики его научного оборудования, организацию работы и его возможности. Гибридный высокопроизводительный вычислительный комплекс ФИЦ ИУ РАН (ГВВК), является составной частью ЦОД ФИЦ ИУ РАН и входит в ЦКП «Информатика». ГВВК предоставляет вычислительные ресурсы в виде облачных услуг «Программное обеспечение как сервис» - SaaS и «Платформа как сервис» - PaaS. С помощью специальных технологий исследователям предоставляется научные сервисы в виде предметно-ориентированных программ. На основе анализа структуры и принципов функционирования ЦКП «Информатика» разработаны базовые показатели эффективности ЦКП, учитывающие его специфику и характеризующий различные аспекты деятельности (развития, деятельности, результативности). Оценка эффективности ЦКП заключается в расчете на основе разработанных показателей некоторых сводных (обобщенных) показателей, которые характеризуют эффективность функционирования ЦКП в различных областях. Также вычисляется интегральный показатель, показывающий эффективность ЦКП в целом. Для получения сводных показателей эффективности и интегрального показателя эффективности предложено использовать методы среднего взвешенного и анализа иерархий. Рассмотрен порядок определения частных показателей эффективности. Отмечены особенности выбора показателей эффективности ЦКП при решении задач синтеза новых материалов, характеризующие возможности вычислительного комплекса по созданию среды виртуализации (пиковая производительность вычислительной системы, реальная производительность вычислительной системы на специализированных тестах, загрузка оборудования прикладными задачами, эффективность программного кода)
PLANS FOR LASER ABLATION OF ACTINIDES INTO AN ECRIS FOR ACCELERATOR MASS SPECTROSCOPY
Abstract A project using Accelerator Mass Spectrometry (AMS) at the ATLAS facility to measure neutron capture rates on a wide range of actinides in a reactor environment is underway. This project will require the measurement of many samples with high precision and accuracy. The AMS technique at ATLAS is based on production of highly-charged positive ions in an electron cyclotron resonance ion source (ECRIS) followed by linear acceleration. We have chosen to use laser ablation as the best means of feeding the actinide material into the ion source because we believe this technique will have more efficiency and lower chamber contamination thus reducing "cross talk" between samples. In addition construction of a new multi-sample holder/changer to allow quick change between multiple samples is part of the project. The status of the project, design, and goals for initial offline ablation tests will be discussed as well as the overall project schedule
Low temperature heat capacity of fullerite C60 doped with nitrogen
The heat capacity Cm of polycrystalline fullerite C60 doped with nitrogen has
been measured in the temperature interval 2 - 13 K. The contributions to heat
capacity from translational lattice vibrations (Debye contribution),
orientational vibrations of the C60 molecules (Einstein contribution) and from
the motion of the N2 molecules in the octahedral cavities of the C60 lattice
have been estimated. However, we could not find (beyond the experimental error
limits) any indications of the first - order phase transformation that had been
detected earlier in the dilatometric investigation of the orientational N2-C60
glass. A possible explanation of this fact is proposed.Comment: 4 pages, 2 figures, to be published in Fiz. Nizk. Temp. (Low Temp.
Phys.
Новая корнавирусная инфекция у детей с сопутствующими заболеваниями: шанс на выздоровление есть всегда (клинические случаи)
The risk of a severe course of new coronavirus infection (COVID-19) due to the development of acute respiratory distress syndrome is extremely high, which is especially true for patients with comorbidities. The aim of the study is to demonstrate the peculiarities of the course and intensive care measures in new coronavirus infection COVID-19 in children with comorbidities. Patients and methods: On the example of clinical cases, the characteristics of the course of a new coronavirus infection of COVID-19 in children with systemic lupus erythematosus and bronchopulmonary dysplasia are considered. Results: The main data from the history and clinical laboratory examination are reflected, which made it possible to identify a cytokine storm in a timely manner, a high risk of adverse course and begin timely specific pathogenetic therapy, including immunoglobulins for intravenous administration, hydroxychloroquine, ritonavir in combination with lopinavir, azithromycin and dexamethasone. Particular attention is paid to the need to limit infusion therapy, maintain a negative water balance and optimal blood oxygen capacity, ambiguity of opinions on the need for routine use of albumin and dexamethasone solutions in patients with COVID-19 has been demonstrated. Conclusion: Children with comorbidities are characterized by a severe course of a new coronavirus infection COVID-19, which requires timely pathogenetic therapy taking into account the individual characteristics of the patient.Риск тяжелого течения новой коронавирусной инфекции (COVID-19) в связи с развитием острого респираторного дистресс-синдрома крайне высок, что особенно справедливо для пациентов с сопутствующими заболеваниями. Цель: демонстрация особенностей течения и мероприятий интенсивной терапии при новой коронавирусной инфекции COVID-19 у детей с сопутствующими заболеваниями. Материалы и методы: на примере клинических случаев рассмотрены особенности течения новой коронавирусной инфекции COVID-19 у детей с системной красной волчанкой и бронхолегочной дисплазией. Результаты: отражены основные данные анамнеза и клинико-лабораторного обследования, позволившие своевременно выявить цитокиновый «шторм», высокий риск неблагоприятного течения и начать своевременную специфическую патогенетическую терапию, включающую в себя иммуноглобулины для внутривенного введения, гидроксихлорохин, ритонавир в комбинации с лопинавиром, азитромицин и дексаметазон. Особое внимание уделено необходимости ограничения инфузионной терапии, поддержания отрицательного водного баланса и оптимальной кислородной емкости крови, продемонстрирована неоднозначность мнений о необходимости рутинного использования растворов альбумина и дексаметазона у пациентов с COVID-19. Заключение: для детей с сопутствующими заболеваниями характерно тяжелое течение новой коронавирусной инфекции COVID-19, что требует проведения своевременной патогенетической терапии с учетом индивидуальных особенностей пациента
- …