Single-Walled Carbon Nanotubes as Shadow Masks for Nanogap Fabrication

We describe a technique for fabricating nanometer-scale gaps in Pt wires on insulating substrates, using individual single-walled carbon nanotubes as shadow masks during metal deposition. More than 80% of the devices display current-voltage dependencies characteristic of direct electron tunneling. Fits to the current-voltage data yield gap widths in the 0.8-2.3 nm range for these devices, dimensions that are well suited for single-molecule transport measurements

Unexpected Scaling of the Performance of Carbon Nanotube Transistors

We show that carbon nanotube transistors exhibit scaling that is qualitatively different than conventional transistors. The performance depends in an unexpected way on both the thickness and the dielectric constant of the gate oxide. Experimental measurements and theoretical calculations provide a consistent understanding of the scaling, which reflects the very different device physics of a Schottky barrier transistor with a quasi-one-dimensional channel contacting a sharp edge. A simple analytic model gives explicit scaling expressions for key device parameters such as subthreshold slope, turn-on voltage, and transconductance.Comment: 4 pages, 4 figure

Carbon Nanotubes as Schottky Barrier Transistors

We show that carbon nanotube transistors operate as unconventional "Schottky barrier transistors", in which transistor action occurs primarily by varying the contact resistance rather than the channel conductance. Transistor characteristics are calculated for both idealized and realistic geometries, and scaling behavior is demonstrated. Our results explain a variety of experimental observations, including the quite different effects of doping and adsorbed gases. The electrode geometry is shown to be crucial for good device performance.Comment: 4 pages, 5 figures, appears in Physical Review Letter

Carbon Nanotube Field-Effect Transistors With Integrated Ohmic Contacts and High-k Gate Dielectrics

High performance enhancement mode semiconducting carbon nanotube field-effect transistors (CNTFETs) are obtained by combining ohmic metal-tube contacts, high dielectric constant HfO2 films as gate insulators, and electrostatically doped nanotube segments as source/drain electrodes. The combination of these elements affords high ON currents, subthreshold swings of ~ 70-80 mV/decade, and allows for low OFF currents and suppressed ambipolar conduction. The doped source and drain approach resembles that of MOSFETs and can impart excellent OFF states to nanotube FETs under aggressive vertical scaling. This presents an important advantage over devices with metal source/drain, or devices commonly referred to as Schottky barrier FETs

Lateral scaling in carbon nanotube field-effect transistors

We have fabricated carbon nanotube (CN) field-effect transistors with multiple, individually addressable gate segments. The devices exhibit markedly different transistor characteristics when switched using gate segments controlling the device interior versus those near the source and drain. We ascribe this difference to a change from Schottky barrier modulation at the contacts to bulk switching. We also find that the current through the bulk portion is independent of gate length for any gate voltage, offering direct evidence for ballistic transport in semiconducting CNs over at least a few hundred nanometers, even for relatively small carrier velocities.Comment: 4 pages, 4 figure

Quantifying the Impacts of Subpixel Reflectance Variability on Cloud Optical Thickness and Effective Radius Retrievals Based On HighResolution ASTER Observations

TOOLS SHAREAbstractRecently, Zhang et al. (2016) presented a mathematical framework based on a secondorder Taylor series expansion in order to quantify the planeparallel homogeneous bias (PPHB) in cloud optical thickness () and effective droplet radius (r(sub eff)) retrieved from the bispectral solar reflective method. This study provides observational validation of the aforementioned framework, using highresolution reflectance observations from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) over 48 marine boundary layer cloud scenes. ASTER reflectances at a horizontal resolution of 30 m are aggregated up to a scale of 1,920 m, providing retrievals of and r(sub eff) at different spatial resolutions. A comparison between the PPHB derived from these retrievals and the predicted PPHB from the mathematical framework reveals a good agreement with correlation coefficients of r > 0.97 (for ) and r > 0.79 (for r(sub eff)). To test the feasibility of PPHB predictions for present and future satellite missions, a scale analysis with varying horizontal resolutions of the subpixel and pixellevel observations is performed, followed by tests of corrections with only limited observational highresolution data. It is shown that for reasonably thick clouds with a mean subpixel larger than 5, correlations between observed and predicted PPHB remain high, even if the number of available subpixels decreases or just a single band provides the information about subpixel reflectance variability. Only for thin clouds the predicted r(sub eff) become less reliable, which can be attributed primarily to an increased retrieval uncertainty for r(sub eff)

Detection of Multi-Layer and Vertically-Extended Clouds Using A-Train Sensors

The detection of mUltiple cloud layers using satellite observations is important for retrieval algorithms as well as climate applications. In this paper, we describe a relatively simple algorithm to detect multiple cloud layers and distinguish them from vertically-extended clouds. The algorithm can be applied to coincident passive sensors that derive both cloud-top pressure from the thermal infrared observations and an estimate of solar photon pathlength from UV, visible, or near-IR measurements. Here, we use data from the A-train afternoon constellation of satellites: cloud-top pressure, cloud optical thickness, the multi-layer flag from the Aqua MODerate-resolution Imaging Spectroradiometer (MODIS) and the optical centroid cloud pressure from the Aura Ozone Monitoring Instrument (OMI). For the first time, we use data from the CloudSat radar to evaluate the results of a multi-layer cloud detection scheme. The cloud classification algorithms applied with different passive sensor configurations compare well with each other as well as with data from CloudSat. We compute monthly mean fractions of pixels containing multi-layer and vertically-extended clouds for January and July 2007 at the OMI spatial resolution (l2kmx24km at nadir) and at the 5kmx5km MODIS resolution used for infrared cloud retrievals. There are seasonal variations in the spatial distribution of the different cloud types. The fraction of cloudy pixels containing distinct multi-layer cloud is a strong function of the pixel size. Globally averaged, these fractions are approximately 20% and 10% for OMI and MODIS, respectively. These fractions may be significantly higher or lower depending upon location. There is a much smaller resolution dependence for fractions of pixels containing vertically-extended clouds (approx.20% for OMI and slightly less for MODIS globally), suggesting larger spatial scales for these clouds. We also find higher fractions of vertically-extended clouds over land as compared with ocean, particularly in the tropics and summer hemisphere

UK Large-scale Wind Power Programme from 1970 to 1990: the Carmarthen Bay experiments and the Musgrove Vertical-Axis Turbines

This article describes the development of the Musgrove Vertical Axis Wind Turbine (VAWT) concept, the UK ‘Carmarthen Bay’ wind turbine test programme, and UK government’s wind power programme to 1990. One of the most significant developments in the story of British wind power occurred during the 1970s, 1980s, and 1990s, with the development of the Musgrove vertical axis wind turbine and its inclusion within the UK Government’s wind turbine test programme. Evolving from a supervisor’s idea for an undergraduate project at Reading University, the Musgrove VAWT was once seen as an able competitor to the horizontal axis wind systems that were also being encouraged at the time by both the UK government and the Central Electricity Generating Board, the then nationalised electricity utility for England and Wales. During the 1980s and 1990s the most developed Musgrove VAWT system, along with three other commercial turbine designs was tested at Carmarthen Bay, South Wales as part of a national wind power test programme. From these developmental tests, operational data was collected and lessons learnt, which were incorporated into subsequent wind power operations.http://dx.doi.org/10.1260/03095240677860621

Field-effect transistors assembled from functionalized carbon nanotubes

We have fabricated field effect transistors from carbon nanotubes using a novel selective placement scheme. We use carbon nanotubes that are covalently bound to molecules containing hydroxamic acid functionality. The functionalized nanotubes bind strongly to basic metal oxide surfaces, but not to silicon dioxide. Upon annealing, the functionalization is removed, restoring the electronic properties of the nanotubes. The devices we have fabricated show excellent electrical characteristics.Comment: 5 pages, 6 figure