Surface acoustic wave solid-state rotational micromotor

Surface acoustic waves (SAWs) are used to drive a 1mm diameter rotor at speeds exceeding 9000 rpm and torque of nearly 5 nNm. Unlike recent high-speed SAW rotary motors, however, the present design does not require a fluid coupling layer but interestingly exploits adhesive stiction as an internal preload, a force usually undesirable at these scales; with additional preloads, smaller rotors can be propelled to 15 000 rpm. This solid-state motor has no moving parts except for the rotor and is sufficiently simple to allow integration into miniaturized drive systems for potential use in microfluidic diagnostics, optical switching and microrobotics

Quantum Transport in Molecular Rings and Chains

We study charge transport driven by deformations in molecular rings and chains. Level crossings and the associated Longuet-Higgins phase play a central role in this theory. In molecular rings a vanishing cycle of shears pinching a gap closure leads, generically, to diverging charge transport around the ring. We call such behavior homeopathic. In an infinite chain such a cycle leads to integral charge transport which is independent of the strength of deformation. In the Jahn-Teller model of a planar molecular ring there is a distinguished cycle in the space of uniform shears which keeps the molecule in its manifold of ground states and pinches level crossing. The charge transport in this cycle gives information on the derivative of the hopping amplitudes.Comment: Final version. 26 pages, 8 fig

A numerical investigation of a piezoelectric surface acoustic wave interaction with a one-dimensional channel

We investigate the propagation of a piezoelectric surface acoustic wave (SAW) across a GaAs/Al$_X$Ga$_{1-X}$As heterostructure surface, on which there is fixed a metallic split-gate. Our method is based on a finite element formulation of the underlying equations of motion, and is performed in three-dimensions fully incorporating the geometry and material composition of the substrate and gates. We demonstrate attenuation of the SAW amplitude as a result of the presence of both mechanical and electrical gates on the surface. We show that the incorporation of a simple model for the screening by the two-dimensional electron gas (2DEG), results in a total electric potential modulation that suggests a mechanism for the capture and release of electrons by the SAW. Our simulations suggest the absence of any significant turbulence in the SAW motion which could hamper the operation of SAW based quantum devices of a more complex geometry.Comment: 8 pages, 8 figure

Quantized charge transport through a static quantum dot using a surface acoustic wave

We present a detailed study of the surface acoustic wave mediated quantized transport of electrons through a split gate device containing an impurity potential defined quantum dot within the split gate channel. A new regime of quantized transport is observed at low RF powers where the surface acoustic wave amplitude is comparable to the quantum dot charging energy. In this regime resonant transport through the single-electron dot state occurs which we interpret as turnstile-like operation in which the traveling wave amplitude modulates the entrance and exit barriers of the quantum dot in a cyclic fashion at GHz frequencies. For high RF powers, where the amplitude of the surface acoustic wave is much larger than the quantum dot energies, the quantized acoustoelectric current transport shows behavior consistent with previously reported results. However, in this regime, the number of quantized current plateaus observed and the plateau widths are determined by the properties of the quantum dot, demonstrating that the microscopic detail of the potential landscape in the split gate channel has a profound influence on the quantized acoustoelectric current transport.Comment: 9 page

Probing the morphology and anti-organic fouling behaviour of a polyetherimide membrane modified with hydrophilic organic acids as additives

A facile approach for the preparation of an organic antifouling polymer membrane has been developed using low molecular weight organic acids as additives. The presence of these additives in the membrane was analysed by FTIR spectroscopy. The properties of the modified membranes were investigated in terms of contact angle, water uptake capacity, SEM and AFM analysis. These additives exerted a strong impact on the rheological properties of the casting solution, thereby altering the membrane morphology, surface roughness, water flux and the hydrophilicity of the membranes, as compared to those of the pristine polyetherimide (PEI) membrane. The organic antifouling properties of the modified membrane were analysed by filtering both bovine serum albumin (BSA) and humic acid solutions. The results showed that the additives exhibited a remarkable improvement in the antifouling properties (FRR of 72%) and a humic acid rejection of up to 86%. These outcomes offer new insights into the use of cheaper and readily available organic acids as additives, compared to the traditional, synthetic polymer materials as additives in membrane preparation

Feasibility of the porous zone approach to modelling vegetation in CFD

Vegetation within stormwater ponds varies seasonly and its presence affects the flow field, which in turn affects the pond’s Residence Time Distribution and its effectiveness at pollutant removal. Vegetated flows are complex and, as a result, few suitable tools exist for evaluating realistic stormwater pond designs. Recent research has suggested using a porous zone to represent vegetation within a CFD model, and this paper investigates the feasibility of this approach using ANSYS Fluent. One of the main benefits of using a porous zone is the ability to derive the relevant parameters from the known physical characteristics of stem diameter and porosity using the Ergun equation. A sensitivity analysis on the viscous resistance factor 1/α1/α and the inertial resistance factor C2C2 has been undertaken by comparing model results to data collected from an experimental vegetated channel. Best fit values of C2C2 were obtained for a range of flow conditions including emergent and submerged vegetation. Results show the CFD model to be insensitive to 1/α1/α but very sensitive to values of C2C2. For submerged vegetation, values of C2C2 derived from the Ergun equation are under-predictions of best-fit C2C2 values as only the turbulence due to the shear layer is represented. The porous zone approach does not take into account turbulence generated from stem wakes such that no meaningful predictions for emergent vegetation were obtained. C2C2 values calculated using a force balance show better agreement with best-fit C2C2 values than those derived from the Ergun equation. Manually fixing values of kk and εε within the porous zone of the model shows initial promise as a means of taking stem wakes into account

Photon trains and lasing : The periodically pumped quantum dot

We propose to pump semiconductor quantum dots with surface acoustic waves which deliver an alternating periodic sequence of electrons and holes. In combination with a good optical cavity such regular pumping could entail anti-bunching and sub-Poissonian photon statistics. In the bad-cavity limit a train of equally spaced photons would arise.Comment: RevTex, 5 pages, 1 figur

Quantized Adiabatic Charge Transport in a Carbon Nanotube

The coupling of a metallic Carbon nanotube to a surface acoustic wave (SAW) is proposed as a vehicle to realize quantized adiabatic charge transport in a Luttinger liquid system. We demonstrate that electron backscattering by a periodic SAW potential, which results in miniband formation, can be achieved at energies near the Fermi level. Electron interaction, treated in a Luttinger liquid framework, is shown to enhance minigaps and thereby improve current quantization. Quantized SAW induced current, as a function of electron density, changes sign at half-filling.Comment: 5 pages, 2 figure

New advances in Raman study of polyvinylchloride structure

In this work we investigated Raman spectra of a number of industrial grades of polyvinylchloride powder and films, prepared from solutions in tetrahydrofuran and acetophenone. The number and spectral characteristics of the Raman lines in the spectral regions of the C-Cl stretching vibrations and in the region of the C-H and CH2 stretching vibrations were evaluated