8,269 research outputs found
Tele-operated high speed anthropomorphic dextrous hands with object shape and texture identification
This paper reports on the development of two number of robotic hands have been developed which focus on tele-operated high speed anthropomorphic dextrous robotic hands. The aim of developing these hands was to achieve a system that seamlessly interfaced between humans and robots. To provide sensory feedback, to a remote operator tactile sensors were developed to be mounted on the robotic hands. Two systems were developed, the first, being a skin sensor capable of shape reconstruction placed on the palm of the hand to feed back the shape of objects grasped and the second is a highly sensitive tactile array for surface texture identification
Limb bone scaling in hopping diprotodonts and quadrupedal artiodactyls
Bone adaptation is modulated by the timing, direction, rate, and magnitude of mechanical loads. To investigate whether frequent slow, or infrequent fast, gaits could dominate bone adaptation to load, we compared scaling of the limb bones from two mammalian herbivore clades that use radically different high-speed gaits, bipedal hopping and quadrupedal galloping. Forelimb and hindlimb bones were collected from 20 artiodactyl and 15 diprotodont species (body mass M 1.05 - 1536 kg) and scanned in clinical computed tomography or X-ray microtomography. Second moment of area (Imax) and bone length (l) were measured. Scaling relations (y = axb) were calculated for l vs M for each bone and for Imax vs M and Imax vs l for every 5% of length. Imax vs M scaling relationships were broadly similar between clades despite the diprotodont forelimb being nearly unloaded, and the hindlimb highly loaded, during bipedal hopping. Imax vs l and l vs M scaling were related to locomotor and behavioural specialisations. Low-intensity loads may be sufficient to maintain bone mass across a wide range of species. Occasional high-intensity gaits might not break through the load sensitivity saturation engendered by frequent low-intensity gaits
Structural Characterization of Rapid Thermal Oxidized Si\u3csub\u3e1−x−y\u3c/sub\u3eGe\u3csub\u3ex\u3c/sub\u3eC\u3csub\u3ey\u3c/sub\u3e Alloy Films Grown by Rapid Thermal Chemical Vapor Deposition
The structural properties of as-grown and rapid thermal oxidized Si1−x−yGexCy epitaxial layers have been examined using a combination of infrared, x-ray photoelectron, x-ray diffraction, secondary ion mass spectroscopy, and Raman spectroscopy techniques. Carbon incorporation into the Si1−x−yGexCy system can lead to compressive or tensile strain in the film. The structural properties of the oxidized Si1−x−yGexCy film depend on the type of strain (i.e., carbon concentration) of the as-prepared film. For compressive or fully compensated films, the oxidation process drastically reduces the carbon content so that the oxidized films closely resemble to Si1−xGex films. For tensile films, two broad regions, one with carbon content higher and the other lower than that required for full strain compensation, coexist in the oxidized films
Evidence for Factorization in Three-body B --> D(*) K- K0 Decays
Motivated by recent experimental results, we use a factorization approach to
study the three-body B --> D(*) K- K0 decay modes. Two mechanisms are proposed
for kaon pair production: current-produced (from vacuum) and transition (from B
meson). The Bbar0 --> D(*)+ K- K0 decay is governed solely by the
current-produced mechanism. As the kaon pair can be produced only by the vector
current, the matrix element can be extracted from e+ e- --> K Kbar processes
via isospin relations. The decay rates obtained this way are in good agreement
with experiment. Both current-produced and transition processes contribute to
B- --> D(*)0 K- K0 decays. By using QCD counting rules and the measured B- -->
D(*)0 K- K0 decay rates, the measured decay spectra can be understood.Comment: 17 pages, 6 figure
InGaN nano-ring structures for high-efficiency light emitting diodes
A technique based on the Fresnel diffraction effect for the fabrication of nano-scale site-controlled ring structures in InGaN/GaN multi-quantum well structures has been demonstrated. The ring structures have an internal diameter of 500 nm and a wall width of 300 nm. A 1 cm-1 Raman shift has been measured, signifying substantial strain relaxation from the fabricated structure. The 9 nm blueshift observed in the cathodoluminescence spectra can be attributed to band filling and/or screening of the piezoelectric field. A light emitting diode based on this geometry has been demonstrated
Phenomenological Consequences of Right-handed Down Squark Mixings
The mixings of quarks, hidden from view in Standard Model (SM), are
naturally the largest if one has an Abelian flavor symmetry. With supersymmetry
(SUSY) their effects can surface via squark loops. Squark and
gluino masses are at TeV scale, but they can still induce effects comparable to
SM in (or ) mixings, while mixing could be close to recent
hints from data. In general, CP phases would be different from SM, as may be
indicated by recent B Factory data. Presence of non-standard soft SUSY
breakings with large could enhance (or )
transitions.Comment: Version to appear in Phys. Rev. Let
Interacting classical and quantum particles
We apply Hall and Reginatto's theory of interacting classical and quantum
ensembles to harmonically coupled particles, with a view to understanding its
experimental implications. This hybrid theory has no free parameters and makes
distinctive predictions that should allow it to be experimentally distinguished
from quantum mechanics. It also bears on the questions of quantum measurement
and quantum gravity.Comment: 7 pages, 6 figure
- …