43 research outputs found
CCD correlated quadruple sampling processor
A correlated quadruple sampling processor for improved signal-to-noise ratio in the output of a charge-coupled device (CCD) is comprised of: switching means for momentarily clamping a CCD signal line at a first reference level A before a CCD data pulse and then obtaining a first data sample B with respect to the reference A during a CCD data pulse, and storing the positive sample B-A; switching means for momentarily clamping the CCD signal line a second time at the level C during the presence of the CCD data pulse and then obtaining a second data sample D with respect to the reference level C after the CCD data pulse, and storing the negative sample D-C; and means for obtaining the difference between the stored samples +(B-A) and -(D-C), thus increasing the net signal amplitude by a factor of about 2 while the noise would be increased by only a factor of square root of 2 since there will be no correlation in the noise between the double samples +(B-A) and -(D-C) effectively added
MIPS: The Multiband Imaging Photometer for SIRTF
The Multiband Imaging Photometer for SIRTF (MIPS) is to be designed to reach as closely as possible the fundamental sensitivity and angular resolution limits for SIRTF over the 3 to 700μm spectral region. It will use high performance photoconductive detectors from 3 to 200μm with integrating JFET amplifiers. From 200 to 700μm, the MIPS will use a bolometer cooled by an adiabatic demagnetization refrigerator. Over much of its operating range, the MIPS will make possible observations at and beyond the conventional Rayleigh diffraction limit of angular resolution
Analysis of a consumer survey on plug-in hybrid electric vehicles
Plug-in Hybrid Electric Vehicles (PHEVs) show potential to reduce greenhouse gas (GHG) emissions, increase fuel efficiency, and offer driving ranges that are not limited by battery capacity. However, these benefits will not be realized if consumers do not adopt this new technology. Several agent-based models have been developed to model potential market penetration of PHEVs, but gaps in the available data limit the usefulness of these models. To address this, we administered a survey to 1000 stated US residents, using Amazon Mechanical Turk, to better understand factors influencing the potential for PHEV market penetration. Our analysis of the survey results reveals quantitative patterns and correlations that extend the existing literature. For example, respondents who felt most strongly about reducing US transportation energy consumption and cutting greenhouse gas emissions had, respectively, 71 and 44 times greater odds of saying they would consider purchasing a compact PHEV than those who felt least strongly about these issues. However, even the most inclined to consider a compact PHEV were not generally willing to pay more than a few thousand US dollars extra for the sticker price. Consistent with prior research, we found that financial and battery-related concerns remain major obstacles to widespread PHEV market penetration. We discuss how our results help to inform agent-based models of PHEV market penetration, governmental policies, and manufacturer pricing and marketing strategies to promote consumer adoption of PHEVs. © 2014 The Authors
Cardiac rehabilitation a global perspective on where we have come and where we must go
No abstract available
Mips: The Multiband Imaging Photometer For SIRTF
The Multiband Imaging Photometer for SIRTF (MIPS) is to be designed to reach as closely as possible the fundamental sensitivity and angular resolution limits for SIRTF over the 3 to 700μm spectral region. It will use high performance photoconductive detectors from 3 to 200μm with integrating JFET amplifiers. From 200 to 700μm, the MIPS will use a bolometer cooled by an adiabatic demagnetization refrigerator. Over much of its operating range, the MIPS will make possible observations at and beyond the conventional Rayleigh diffraction limit of angular resolution
MIPS: The Multiband Imaging Photometer for SIRTF
The Multiband Imaging Photometer for SIRTF (MIPS) is to be designed to reach as closely as possible the fundamental sensitivity and angular resolution limits for SIRTF over the 3 to 700μm spectral region. It will use high performance photoconductive detectors from 3 to 200μm with integrating JFET amplifiers. From 200 to 700μm, the MIPS will use a bolometer cooled by an adiabatic demagnetization refrigerator. Over much of its operating range, the MIPS will make possible observations at and beyond the conventional Rayleigh diffraction limit of angular resolution
Response to reduced nicotine content cigarettes among smokers differing in tobacco dependence severity
This study examines whether tobacco dependence severity moderates the acute effects of reducing nicotine content in cigarettes on the addiction potential of smoking, craving/withdrawal, or smoking topography. Participants (N = 169) were daily smokers with mild, moderate, or high tobacco-dependence severity using the Heaviness of Smoking Index. Following brief abstinence, participants smoked research cigarettes varying in nicotine content (0.4, 2.4, 5.2, 15.8 mg nicotine/g tobacco) in a within-subject design. Results were analyzed using repeated measures analysis of co-variance. No main effects of dependence severity or interactions with nicotine dose were noted in relative reinforcing effects in concurrent choice testing or subjective effects on the modified Cigarette Evaluation Questionnaire. Demand for smoking in the Cigarette Purchase Task was greater among more dependent smokers, but reducing nicotine content decreased demand independent of dependence severity. Dependence severity did not significantly alter response to reduced nicotine content cigarettes on the Minnesota Tobacco Withdrawal Scale nor Questionnaire of Smoking Urges-brief (QSU) Factor-2 scale; dependence severity and dose interacted significantly on the QSU-brief Factor-1 scale, with reductions dependent on dose among highly but not mildly or moderately dependent smokers. Dependence severity and dose interacted significantly on only one of six measures of smoking topography (i.e., maximum flow rate), which increased as dose increased among mildly and moderately but not highly dependent smokers. These results suggest that dependence severity has no moderating influence on the ability of reduced nicotine content cigarettes to lower the addiction potential of smoking, and minimal effects on relief from craving/withdrawal or smoking topography
On-orbit performance of the MIPS instrument
The Multiband Imaging Photometer for Spitzer (MIPS) provides long wavelength capability for the mission, in imaging bands at 24, 70, and 160 microns and measurements of spectral energy distributions between 52 and 100 microns at a spectral resolution of about 7%. By using true detector arrays in each band, it provides both critical sampling of the Spitzer point spread function and relatively large imaging fields of view, allowing for substantial advances in sensitivity, angular resolution, and efficiency of areal coverage compared with previous space far-infrared capabilities. The Si:As BIB 24 micron array has excellent photometric properties, and measurements with rms relative errors of 1% or better can be obtained. The two longer wavelength arrays use Ge:Ga detectors with poor photometric stability. However, the use of 1.) a scan mirror to modulate the signals rapidly on these arrays, 2.) a system of on-board stimulators used for a relative calibration approximately every two minutes, and 3.) specialized reduction software result in good photometry with these arrays also, with rms relative errors of less than 10%
Recommended from our members
Silicon PIN diode array hybrids for charged particle detection
We report on the design of silicon PIN diode array hybrids for use as charged particle detectors. A brief summary of the need for vertex detectors is presented. Circuitry, block diagrams and device specifications are included. 8 refs., 7 figs., 1 tab