Nondestructive Evaluation of Graphite/Epoxy Composite Damage

Ultrasonic and acoustic emission techniques were used to monitor and evaluate material damage in a graphite/epoxy laminate containing a machined hole as an initial flaw and subjected to fully reversed spectrum fatigue loading at room temperature. It was found that the flaw growth progressed radially around the initial hole at a uniform rate during cycling at the lower stress levels. At the higher levels, material damage accelerated dramatically, progressing faster in the transverse direction toward the free edges. By close examination of the A-scan and RF spectrum photographs, it was determined that damage modes could be defined as to their extent and relative location within the specimen. These conclusions were supported by photographs of the failed specimen

Dirichlet sigma models and mean curvature flow

The mean curvature flow describes the parabolic deformation of embedded branes in Riemannian geometry driven by their extrinsic mean curvature vector, which is typically associated to surface tension forces. It is the gradient flow of the area functional, and, as such, it is naturally identified with the boundary renormalization group equation of Dirichlet sigma models away from conformality, to lowest order in perturbation theory. D-branes appear as fixed points of this flow having conformally invariant boundary conditions. Simple running solutions include the paper-clip and the hair-pin (or grim-reaper) models on the plane, as well as scaling solutions associated to rational (p, q) closed curves and the decay of two intersecting lines. Stability analysis is performed in several cases while searching for transitions among different brane configurations. The combination of Ricci with the mean curvature flow is examined in detail together with several explicit examples of deforming curves on curved backgrounds. Some general aspects of the mean curvature flow in higher dimensional ambient spaces are also discussed and obtain consistent truncations to lower dimensional systems. Selected physical applications are mentioned in the text, including tachyon condensation in open string theory and the resistive diffusion of force-free fields in magneto-hydrodynamics.Comment: 77 pages, 21 figure

Spatial soliton robustness against spatially anisotropic phase perturbations

We demonstrate experimentally that spatial solitons in AlGaAs waveguides are resilient against spatially anisotropic perturbations in their phase caused by introducing a wedge in the soliton propagation path. In agreement with numerical simulations, the solitons maintained their initial beam shape and width, independent of the fraction of the soliton beam intercepted by the wedge

Optical properties of high quality Cu2ZnSnSe4 thin films

Cu2ZnSnSe4 thin films, fabricated on bare or molybdenum coated glass substrates by magnetron sputtering and selenisation, were studied by a range of techniques. Photoluminescence spectra reveal an excitonic peak and two phonon replicas of a donor-acceptor pair (DAP) recombination. Its acceptor and donor ionisation energies are 27 and 7 meV, respectively. This demonstrates that high-quality Cu2ZnSnSe4 thin films can be fabricated. An experimental value for the longitudinal optical phonon energy of 28 meV was estimated. The band gap energy of 1.01 eV at room temperature was determined using optical absorption spectr

Energy use and height in office buildings

The relationship between energy use and height is examined for a sample of 611 office buildings in England and Wales using actual annual metered consumption of electricity and fossil fuels. The buildings are of different ages; they have different construction characteristics and methods of heating and ventilation; and they include both public and commercial offices. When rising from five storeys and below to 21 storeys and above, the mean intensity of electricity and fossil fuel use increases by 137% and 42% respectively, and mean carbon emissions are more than doubled. A multivariate regression model is used to interpret the contributions of building characteristics and other factors to this result. Air-conditioning is important, but a trend of increased energy use with height is also found in naturally ventilated buildings. Newer buildings are not in general more efficient: the intensity of electricity use is greater in offices built in recent decades, without a compensating decrease in fossil fuel use. The evidence suggests it is likely – although not proven – that much of the increase in energy use with height is due to the greater exposure of taller buildings to lower temperatures, stronger winds and more solar gains

All the way to the top! The energy implications of building tall cities

Density of urban form may be achieved under a variety of morphological designs that do not rely on tallness alone. Tall buildings have implications on the broader urban environment and infrastructure that lower buildings would not have, e.g. wind effects, sight-lines, or over-shading. They may also have an impact on energy use for reasons of buildings-physics, construction, and occupant practices. This study uses a statistical approach of neighbourhood level data to analyse the impact of building morphology (e.g. height, volume and density) on energy demand in 12 local authorities in London. The research shows that areas marked by tall buildings use more gas after adjusting for exposures surface area, volume, number of residents and other features. The implication for energy policy and planning is building taller without increasing density may have an energy penalty

A direct D-bar reconstruction algorithm for recovering a complex conductivity in 2-D

A direct reconstruction algorithm for complex conductivities in $W^{2,\infty}(\Omega)$, where $\Omega$ is a bounded, simply connected Lipschitz domain in $\mathbb{R}^2$, is presented. The framework is based on the uniqueness proof by Francini [Inverse Problems 20 2000], but equations relating the Dirichlet-to-Neumann to the scattering transform and the exponentially growing solutions are not present in that work, and are derived here. The algorithm constitutes the first D-bar method for the reconstruction of conductivities and permittivities in two dimensions. Reconstructions of numerically simulated chest phantoms with discontinuities at the organ boundaries are included.Comment: This is an author-created, un-copyedited version of an article accepted for publication in [insert name of journal]. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at 10.1088/0266-5611/28/9/09500

Ground-plane screening of Coulomb interactions in two-dimensional systems: How effectively can one two-dimensional system screen interactions in another?

The use of a nearby metallic ground-plane to limit the range of the Coulomb interactions between carriers is a useful approach in studying the physics of two-dimensional (2D) systems. This approach has been used to study Wigner crystallization of electrons on the surface of liquid helium, and most recently, the insulating and metallic states of semiconductor-based two-dimensional systems. In this paper, we perform calculations of the screening effect of one 2D system on another and show that a 2D system is at least as effective as a metal in screening Coulomb interactions. We also show that the recent observation of the reduced effect of the ground-plane when the 2D system is in the metallic regime is due to intralayer screening.Comment: 14 pages, 7 figures Accepted in PR

MTSS1 is a critical epigenetically regulated tumor suppressor in CML

Chronic myeloid leukemia (CML) is driven by malignant stem cells that can persist despite therapy. We have identified Metastasis suppressor 1 (Mtss1/MIM) to be downregulated in hematopoietic stem and progenitor cells from leukemic transgenic SCLtTA/Bcr-Abl mice and in patients with CML at diagnosis, and Mtss1 was restored when patients achieved complete remission. Forced expression of Mtss1 decreased clonogenic capacity and motility of murine myeloid progenitor cells and reduced tumor growth. Viral transduction of Mtss1 into lineage depleted SCLtTA/Bcr-Abl bone marrow cells decreased leukemic cell burden in recipients, and leukemogenesis was reduced upon injection of Mtss1 overexpressing murine myeloid 32D cells. Tyrosine kinase inhibitor (TKI) therapy and reversion of Bcr-Abl expression increased Mtss1 expression but failed to restore it to control levels. CML patient samples revealed higher DNA methylation of specific Mtss1 promoter CpG sites that contain binding sites for Kaiso and Rest transcription factors. In summary, we identified a novel tumor suppressor in CML stem cells that is downregulated by both Bcr-Abl kinase-dependent and -independent mechanisms. Restored Mtss1 expression markedly inhibits primitive leukemic cell biology in vivo, providing a therapeutic rationale for the Bcr-Abl-Mtss1 axis to target TKI resistant CML stem cells in patients