743 research outputs found
It\u27s Not Easy Being Green: Evolving Legal Frameworks to Address the Unanticipated Consequences of New Environmental Programs
Recommended from our members
Development of proton-conducting membranes for hydrogen separation
The objective of this project is to develop dense ceramic membranes that can efficiently and economically separate hydrogen from gaseous mixtures (e.g., syngas, coal gas, etc.). Toward this end, materials with suitable electronic and protonic conductivities will be identified, and methods for fabricating thin, dense ceramic membranes from such materials will be developed. The chemical and mechanical stability of the membranes will be determined to estimate the expected lifetime of the membranes. Scoping-level evaluations will be performed to identify potential applications of proton membrane technology. Areas that will be evaluated include overall market scale, typical site operating scale, process integration opportunities and issues, and alternative-source economics. The literature on mixed electronic/protonic conductors was surveyed to identify suitable candidate materials. SrCe{sub 1{minus}x}M{sub x}O{sub 3{minus}{delta}} and BaCe{sub 1{minus}x}M{sub x}O{sub 3{minus}{delta}} (where M is a fixed-valent dopant such as Ca, Y, Yb, In, Nd, or Gd) were selected for further investigation on the basis of their reported total conductivities and proton transference numbers
Recommended from our members
Development of mixed-conducting ceramic membrane for hydrogen separation.
The Office of Fossil Energy of the US Department of Energy is formulating ''Vision 21,'' a program aimed at developing technologies for highly efficient power and coproduction plants that discharge almost no pollutants and close the carbon cycle. An integrated gasification combined cycle (IGCC) system is a likely modular component of a Vision 21 coproduction plant. IGCC technology is ideally suited for the coproduction of electricity and high-quality transportation fuel and/or a host of high-value chemicals. As part of the IGCC system, high-temperature membranes for separating hydrogen from coal gasification and other partial-oxidation-product streams are being considered. Thin and dense ceramic membranes fabricated from mixed protonic and electronic conductors provide a simple, efficient means for separating hydrogen from gas streams. Dense mixed-conducting ceramic membranes effect transport via ion- and electron-conducting mechanisms. Because these membranes have no interconnected porosity, selectively for hydrogen is nearly 100%. Hydrogen separation is achieved in a nongalvanic mode, i.e., without the need for electrodes and external power supply to drive the separation. BaCeO{sub 3}-based materials exhibit protonic conductivity that is significantly higher than its electronic conductivity. To enhance the electronic conductivity and increase hydrogen permeation, we have fabricated BaCeO{sub 3}-containing cermet membranes and used them in a nongalvanic mode to separate hydrogen from gas streams containing H{sub 2}, CO, CO{sub 2} and trace amounts of H{sub 2}S. Material selection, fabrication, performance as well as technical/technological challenges of the ceramic membranes for hydrogen separation are discussed in this talk
Multisensory information facilitates reaction speed by enlarging activity difference between superior colliculus hemispheres in rats
Animals can make faster behavioral responses to multisensory stimuli than to unisensory stimuli. The superior colliculus (SC), which receives multiple inputs from different sensory modalities, is considered to be involved in the initiation of motor responses. However, the mechanism by which multisensory information facilitates motor responses is not yet understood. Here, we demonstrate that multisensory information modulates competition among SC neurons to elicit faster responses. We conducted multiunit recordings from the SC of rats performing a two-alternative spatial discrimination task using auditory and/or visual stimuli. We found that a large population of SC neurons showed direction-selective activity before the onset of movement in response to the stimuli irrespective of stimulation modality. Trial-by-trial correlation analysis showed that the premovement activity of many SC neurons increased with faster reaction speed for the contraversive movement, whereas the premovement activity of another population of neurons decreased with faster reaction speed for the ipsiversive movement. When visual and auditory stimuli were presented simultaneously, the premovement activity of a population of neurons for the contraversive movement was enhanced, whereas the premovement activity of another population of neurons for the ipsiversive movement was depressed. Unilateral inactivation of SC using muscimol prolonged reaction times of contraversive movements, but it shortened those of ipsiversive movements. These findings suggest that the difference in activity between the SC hemispheres regulates the reaction speed of motor responses, and multisensory information enlarges the activity difference resulting in faster responses
Recommended from our members
Coated-wire-in-tube processing of bismuth-2223 superconductors
A coated-wire-in-tube (CWIT) process greatly increases the silver/superconductor interface area in silver-sheathed Bi-2223 superconductors. When the performance of CWIT samples is compared to that of conventional monofilaments made with the same powder, critical current density increases significantly with increased silver/superconductor interface area. Benefits of increasing the silver/superconductor interface area are realized only when there is good continuity of the coated wires, and this requires a mechanical deformation sequence to preserve good continuity of the wires
Motor Preparatory Activity in Posterior Parietal Cortex is Modulated by Subjective Absolute Value
For optimal response selection, the consequences associated with behavioral success or failure must be appraised. To determine how monetary consequences influence the neural representations of motor preparation, human brain activity was scanned with fMRI while subjects performed a complex spatial visuomotor task. At the beginning of each trial, reward context cues indicated the potential gain and loss imposed for correct or incorrect trial completion. FMRI-activity in canonical reward structures reflected the expected value related to the context. In contrast, motor preparatory activity in posterior parietal and premotor cortex peaked in high “absolute value” (high gain or loss) conditions: being highest for large gains in subjects who believed they performed well while being highest for large losses in those who believed they performed poorly. These results suggest that the neural activity preceding goal-directed actions incorporates the absolute value of that action, predicated upon subjective, rather than objective, estimates of one's performance
Evidence for the existence of powder sub-populations in micronized materials : Aerodynamic size-fractions of aerosolized powders possess distinct physicochemical properties
This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.Purpose: To investigate the agglomeration behaviour of the fine ( 12.8 µm) particle fractions of salmeterol xinafoate (SX) and fluticasone propionate (FP) by isolating aerodynamic size fractions and characterising their physicochemical and re-dispersal properties. Methods: Aerodynamic fractionation was conducted using the Next Generation Impactor (NGI). Re-crystallized control particles, unfractionated and fractionated materials were characterized for particle size, morphology, crystallinity and surface energy. Re-dispersal of the particles was assessed using dry dispersion laser diffraction and NGI analysis. Results: Aerosolized SX and FP particles deposited in the NGI as agglomerates of consistent particle/agglomerate morphology. SX particles depositing on Stages 3 and 5 had higher total surface energy than unfractionated SX, with Stage 5 particles showing the greatest surface energy heterogeneity. FP fractions had comparable surface energy distributions and bulk crystallinity but differences in surface chemistry. SX fractions demonstrated higher bulk disorder than unfractionated and re-crystallized particles. Upon aerosolization, the fractions differed in their intrinsic emission and dispersion into a fine particle fraction (< 5.0 µm). Conclusions: Micronized powders consisted of sub-populations of particles displaying distinct physicochemical and powder dispersal properties compared to the unfractionated bulk material. This may have implications for the efficiency of inhaled drug deliveryPeer reviewe
Recommended from our members
Effect of lead content on phase evolution and microstructural development in Ag-clad Bi-2223 composite conductors
A two powder process was used to prepare silver-sheathed monofilamentary Bi{sub 1.8}Pb{sub x}Sr{sub 1.98}Ca{sub 1.97}Cu{sub 3.08}O{sub y} (Bi-2223) tapes with varying lead contents, x, from 0.2 to 0.5. The resulting tapes were subjected to thermomechanical processing and then characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive x-ray analysis (EDX). Layered phase texture was accessed using image analysis software on scanned SEM micrographs. Transport currents were measured at 77 K and zero field by the four-probe method. It was found that tapes with low lead content (X = 0.2 and 0.25) showed incomplete conversion to Bi-2223, had small grain size and poor c-axis texture. Tapes having higher lead content (x = 0.4 and 0.5) also showed incomplete conversion and the presence of lead-rich secondary phases. Tapes with lead content x = 0.3 and 0.35 showed complete conversion to Bi-2223, and had the least amount of secondary phases, the best c-axis texture, and the highest transport current (j{sub c}). The carbon content of the precursor powder also had a strong influence on secondary-phase chemistry
Fabrication by Inclined-Substrate Deposition of Biaxially Textured Buffer Layer for Coated Conductors
The statistical neuroanatomy of frontal networks in the macaque
We were interested in gaining insight into the functional properties of frontal networks based upon their anatomical inputs. We took a neuroinformatics approach, carrying out maximum likelihood hierarchical cluster analysis on 25 frontal cortical areas based upon their anatomical connections, with 68 input areas representing exterosensory, chemosensory, motor, limbic, and other frontal inputs. The analysis revealed a set of statistically robust clusters. We used these clusters to divide the frontal areas into 5 groups, including ventral-lateral, ventral-medial, dorsal-medial, dorsal-lateral, and caudal-orbital groups. Each of these groups was defined by a unique set of inputs. This organization provides insight into the differential roles of each group of areas and suggests a gradient by which orbital and ventral-medial areas may be responsible for decision-making processes based on emotion and primary reinforcers, and lateral frontal areas are more involved in integrating affective and rational information into a common framework
- …