Potential of Virginia Mallow as an Energy Feedstock

This study aims to compare the potential of Virginia mallow to other high yielding perennial grasses and hardwoods by characterising and comparing fast pyrolysis product yields. Feedstocks selected for this study include miscanthus (Miscanthus x giganteus), Virginia mallow (Sida hermaphrodita), willow short rotation coppice (SRC) (Salix viminalis) and oak (Quercus robur). The experimental work was split into two sections: analytical (Py–GC–MS) and laboratory-scale processing using a 300 g h−1 continuous bubbling fluidised bed reactor. Pyrolysis–gas chromatography–mass spectrometry (Py–GC–MS) has been used to quantify pyrolysis products from these feedstocks by simulating fast pyrolysis heating rates using a CDS 5200 pyrolyser closed coupled to a PerkinElmer Clarus 680 GC–MS. High bio-oil yields were achieved for Virginia mallow, willow SRC and oak (65.36, 62.55 and 66.43 wt% respectively), but miscanthus only produced a yield of 53.46 wt% due to increased feedstock ash content. The water content in the bio-oil is highest from miscanthus (17.64 wt%) and relatively low in the Virginia mallow and hardwoods willow SRC and oak (12.49, 13.88 and 14.53 wt%). Similar high yields of bio-oil and low yields of char and non-condensable gas compared to willow SRC make Virginia mallow an attractive feedstock for fast pyrolysis processing. Graphic Abstract: [Figure not available: see fulltext.]

Robonaut 2 - The First Humanoid Robot in Space

NASA and General Motors have developed the second generation Robonaut, Robonaut 2 or R2, and it is scheduled to arrive on the International Space Station in late 2010 and undergo initial testing in early 2011. This state of the art, dexterous, anthropomorphic robotic torso has significant technical improvements over its predecessor making it a far more valuable tool for astronauts. Upgrades include: increased force sensing, greater range of motion, higher bandwidth and improved dexterity. R2 s integrated mechatronics design results in a more compact and robust distributed control system with a faction of the wiring of the original Robonaut. Modularity is prevalent throughout the hardware and software along with innovative and layered approaches for sensing and control. The most important aspects of the Robonaut philosophy are clearly present in this latest model s ability to allow comfortable human interaction and in its design to perform significant work using the same hardware and interfaces used by people. The following describes the mechanisms, integrated electronics, control strategies and user interface that make R2 a promising addition to the Space Station and other environments where humanoid robots can assist people

The Reverse Brazil Nut Problem: Competition between Percolation and Condensation

In the Brazil nut problem (BNP), hard spheres with larger diameters rise to the top. There are various explanations (percolation, reorganization, convection), but a broad understanding or control of this effect is by no means acheived. A theory is presented for the crossover from the BNP to the reverse Brazil nut problem (RBNP) based on a competition between the percolation effect and the condensation of hard spheres. The crossover condition is determined, and the theoretical predictions are compared to Molecular Dynamics simulations in two and three dimensions.Comment: 9 pages which includes 7 figure

Drying kinetic analysis of municipal solid waste using modified page model and pattern search method

This work studied the drying kinetics of the organic fractions of municipal solid waste (MSW) samples with different initial moisture contents and presented a new method for determination of drying kinetic parameters. A series of drying experiments at different temperatures were performed by using a thermogravimetric technique. Based on the modified Page drying model and the general pattern search method, a new drying kinetic method was developed using multiple isothermal drying curves simultaneously. The new method fitted the experimental data more accurately than the traditional method. Drying kinetic behaviors under extrapolated conditions were also predicted and validated. The new method indicated that the drying activation energies for the samples with initial moisture contents of 31.1 and 17.2 % on wet basis were 25.97 and 24.73 kJ mol−1. These results are useful for drying process simulation and industrial dryer design. This new method can be also applied to determine the drying parameters of other materials with high reliability

Influence of moisture contents on the fast pyrolysis of trommel fines in a bubbling fluidized bed reactor

In this study, the effect of moisture contents [2.69 wt% (bone-dry), 5 wt% and 10 wt%] on product yields and process conversion efficiency during fast pyrolysis of a pre-treated trommel fines feedstock was investigated at 500 °C. Experiments were carried out using a 300 g h −1 bubbling fluidised bed rig. Yields of organic liquids ranged from 15.2 to 19.6 wt% of feedstock, which decreased with increasing moisture content. Hence, the bone-dry feedstock gave the maximum yield and consequently the highest process conversion efficiency of 43%. Increased moisture content also led to increase formation of unidentified gas products, indicating increased conversion of organic liquids. Due to the high ash content of the feedstocks, about 52 wt% solid residues, containing around 82% ash was recovered in the char pot in each case. Hence, to maximize oil yields during fast pyrolysis, trommel fines would require extensive drying to remove the original 46 wt% moisture as well as reducing the ash content considerably. XRF analysis of the ash in the feedstock and solid residues showed that the main elements present included Ca, Si, Fe, Pb, K, Cl and Al. Apart from the presence of Pb (which may be from the glass contents of the feedstock), the solid residues could be used for land reclamation or co-incinerated at cement kilns for cement manufacture

Insights into the ceria-catalyzed ketonization reaction for biofuels applications

The ketonization of small organic acids is a valuable reaction for biorenewable applications. Ceria has long been used as a catalyst for this reaction; however, under both liquid and vapor phase conditions, it was found that given the right temperature regime of about 150-300 °C, cerium oxide, which was previously believed to be a stable catalyst for ketonization, can undergo bulk transformations. This result, along with other literature reports, suggest that the long held belief of two separate reaction pathways for either bulk or surface ketonization reactions are not required to explain the interaction of cerium oxide with organic acids. X-ray photon spectroscopy, scanning electron microscopy, and temperature programmed decomposition results supported the formation of metal acetates and explained the occurrence of cerium reduction as well as the formation of cerium oxide/acetate whiskers. After thermogravimetry/mass spectrometry and FT-IR experiments, a single reaction sequence is proposed that can be applied to either surface or bulk reactions with ceria