Enhancement of the luminescence properties of Eu (III) containing paramagnetic saponite clays

In this study, 1,10-phenanthroline molecules were introduced in the interlayer space of a paramagnetic synthetic saponite clay containing both Eu3+ and Gd3+ ions in structural positions. Two samples with different loading of phenanthroline dye were prepared. The resulting hybrid materials possessed improved optical emission properties due to an efficient antenna effect from the phenanthroline to the Eu3+ centers; this effect was demonstrated to be higher than the metal-to-metal Gd3+-Eu3+ energy transfer previously studied. Insights on the relaxometric properties in aqueous solution of the solids after incorporation of the antenna groups were also obtained through NMR relaxometric analyses

DTPA-Functionalized silica-based monoliths for the removal of transition and lanthanide ions from aqueous phase

Transition and rare-earth metals are essential raw materials used in a wide range of technological applications; moreover, their consumption is often associated with high production of wastes­. Therefore, their recycling and recovery from end-of-life products or metal-contaminated aqueous environments is of considerable importance from a circular economy perspective. In our study, synthetic mesoporous silica monoliths, obtained by sol-gel synthesis[1] and functionalized with chelating groups are used for the recovery of metal ions from aqueous matrices (MONO-DTPA). The monoliths were characterized using a multi-technique approach and were tested in the recovery of paramagnetic Gd3+, Cu2+ and Co2+ ions from aqueous solutions, using 1H-NMR relaxometry to evaluate their uptake performance in real time and in simple conditions[2]. Detailed information on the kinetics of the capture process was also extrapolated. Finally, the possibility to regenerate the solid sorbents was evaluated. The modified silica monoliths were able to recover an appreciable amount of both di- and trivalent metal ions. The best results were obtained in the case of Cu2+ after 24 hours of contact, with a recovered amount of 0.29 mmol/g corresponding to 18.48 mg/g (Fig. 1, A). The capture performance of MONO-DTPA has been shown to be superior to that of natural or synthetic materials commonly used for metal ion removal (Fig 1, B). [1] V. Miglio, C. Zaccone, C. Vittoni, I. Braschi, E. Buscaroli, G. Golemme, L. Marchese and C. Bisio, Molecules 2021, 26, 1316 [2] S. Marchesi, S. Nascimbene, M. Guidotti, C. Bisio and F. Carniato, Dalton Trans. 2022, 51, 4502–4509

Resonant inelastic x-ray scattering probes the electron-phonon coupling in the spin-liquid kappa-(BEDT-TTF)2Cu2(CN)3

Resonant inelastic x-ray scattering at the N K edge reveals clearly resolved harmonics of the anion plane vibrations in the kappa-(BEDT-TTF)2Cu2(CN)3 spin-liquid insulator. Tuning the incoming light energy at the K edge of two distinct N sites permits to excite different sets of phonon modes. Cyanide CN stretching mode is selected at the edge of the ordered N sites which are more strongly connected to the BEDT-TTF molecules, while positionally disordered N sites show multi-mode excitation. Combining measurements with calculations on an anion plane cluster permits to estimate the sitedependent electron-phonon coupling of the modes related to nitrogen excitation

Bifunctional Paramagnetic and Luminescent Clays Obtained by Incorporation of Gd3+and Eu3+Ions in the Saponite Framework

A novel bifunctional saponite clay incorporating gadolinium (Gd3+) and europium (Eu3+) in the inorganic framework was prepared by one-pot hydrothermal synthesis. The material exhibited interesting luminescent and paramagnetic features derived from the co-presence of the lanthanide ions in equivalent structural positions. Relaxometry and photoluminescence spectroscopy shed light on the chemical environment surrounding the metal sites, the emission properties of Eu3+, and the dynamics of interactions between Gd3+ and the inner-sphere water placed in the saponite gallery. The optical and paramagnetic properties of this solid make it an attractive nanoplatform for bimodal diagnostic applications

Porcine brachial artery tortuosity for in vivo evaluation of neuroendovascular devices

We report a novel model of arterial tortuosity in the porcine brachial artery for testing of endovascular devices in the flexed forelimb position. This provides an ideal vascular territory for an in vivo assessment of guidewires, microcatheters, and endovascular implants because it closely mimics the challenging curvature at the carotid siphon

Clot Characterization in Acute Ischemic Stroke

Background: In the treatment of acute ischemic stroke (AIS) with mechanical thrombectomy, revascularization depends upon integration of the thrombus into the retrieval device. The histologic and mechanical characteristics of thrombi are key determinants of effective thrombus-device interaction. Thrombi with greater calcium and fibrin content have been associated with more challenging thrombus retrievals. Objective: To develop thrombus analogs with histologic and mechanical characteristics similar to those of challenging clinical thrombi for thrombectomy device testing. Methods: Fifty thrombi were retrieved from twenty-nine patients with AIS. Clinical thrombi underwent histologic analysis to determine erythrocyte and fibrin content. Nine clinical thrombi underwent dynamic mechanical analysis to determine thrombus stiffness, which was defined as a function of stress variation at low and high strains. Results from the clinical thrombi were used to determine the key mechanical characteristics of the challenging thrombus analogs, the calcium apatite-rich and fibrin-rich thrombus analogs. Results: Of the twenty-nine AIS cases, fifteen required multiple pass attempts. The average histologic composition of the challenging clinical thrombi was 26% erythrocyte, 54% fibrin, and 20% mixed. The average stiffness of the challenging clinical thrombi was found to be similar to that of the fibrin-rich thrombus analogs. Addition of calcium apatite increased the stiffness of the thrombus analogs at low strain approximately five-fold. Conclusions: Thrombus analogs with mechanical characteristics similar to those of challenging clinical thrombi were successfully developed. The calcium apatite-rich thrombus analogs were found to be stiffer than the fibrin-rich red thrombus analogs

Cationic double K-hole pre-edge states of CS2 and SF6

Recent advances in X-ray instrumentation have made it possible to measure the spectra of an essentially unexplored class of electronic states associated with double inner-shell vacancies. Using the technique of single electron spectroscopy, spectra of states in CS2 and SF6 with a double hole in the K-shell and one electron exited to a normally unoccupied orbital have been obtained. The spectra are interpreted with the aid of a high-level theoretical model giving excellent agreement with the experiment. The results shed new light on the important distinction between direct and conjugate shake-up in a molecular context. In particular, systematic similarities and differences between pre-edge states near single core holes investigated in X-ray absorption spectra and the corresponding states near double core holes studied here are brought out

Aneurysm permeability following coil embolization: packing density and coil distribution

BACKGROUND: Rates of durable aneurysm occlusion following coil embolization vary widely, and a better understanding of coil mass mechanics is desired. The goal of this study is to evaluate the impact of packing density and coil uniformity on aneurysm permeability. METHODS: Aneurysm models were coiled using either Guglielmi detachable coils or Target coils. The permeability was assessed by taking the ratio of microspheres passing through the coil mass to those in the working fluid. Aneurysms containing coil masses were sectioned for image analysis to determine surface area fraction and coil uniformity. RESULTS: All aneurysms were coiled to a packing density of at least 27%. Packing density, surface area fraction of the dome and neck, and uniformity of the dome were significantly correlated (p \u3c 0.05). Hence, multivariate principal components-based partial least squares regression models were used to predict permeability. Similar loading vectors were obtained for packing and uniformity measures. Coil mass permeability was modeled better with the inclusion of packing and uniformity measures of the dome (r(2)=0.73) than with packing density alone (r(2)=0.45). The analysis indicates the importance of including a uniformity measure for coil distribution in the dome along with packing measures. CONCLUSIONS: A densely packed aneurysm with a high degree of coil mass uniformity will reduce permeability

The effect of intracranial stent implantation on the curvature of the cerebrovasculature

BACKGROUND AND PURPOSE: Recently, the use of stents to assist in the coiling and repair of wide-neck aneurysms has been shown to be highly effective; however, the effect of these stents on the RC of the parent vessel has not been quantified. The purpose of this study was to quantify the effect of intracranial stenting on the RC of the implanted artery using 3D datasets. MATERIALS AND METHODS: Twenty-four patients receiving FDA-approved neurovascular stents to support coil embolization of brain aneurysms were chosen for this study. The stents were located in the ICA, ACA, or MCA. We analyzed C-arm rotational angiography and contrast-enhanced cone beam CT datasets before and after stent implantation, respectively, to ascertain changes in vessel curvature. The images were reconstructed, and the vessel centerline was extracted. From the centerline, the RC was calculated. RESULTS: The average implanted stent length was 25.4 +/- 5.8 mm, with a pre-implantation RC of 7.1 +/- 2.1 mm and a postimplantation RC of 10.7 +/- 3.5 mm. This resulted in a 3.6 +/- 2.7 mm change in the RC due to implantation (P \u3c .0001), more than a 50% increase from the pre-implantation value. There was no difference in the change of RC for the different locations studied. The change in RC was not impacted by the extent of coil packing within the aneurysm. CONCLUSIONS: The implantation of neurovascular stents can be shown to have a large impact on the RC of the vessel. This will lead to a change in the local hemodynamics and flow pattern within the aneurysm