Flexible copper-indium-diselenide films and devices for space applications

With the ever increasing demands on space power systems, it is imperative that low cost, lightweight, reliable photovoltaics be developed. One avenue of pursuit for future space power applications is the use of low cost, lightweight flexible PV cells and arrays. Most work in this area assumes the use of flexible amorphous silicon (a-Si), despite its inherent instability and low efficiencies. However, polycrystalline thin film PV such as copper-indium-diselenide (CIS) are inherently more stable and exhibit better performance than a-Si. Furthermore, preliminary data indicate that CIS also offers exciting properties with respect to space applications. However, CIS has only heretofore only produced on rigid substrates. The implications of flexible CIS upon present and future space power platforms was explored. Results indicate that space qualified CIS can dramatically reduce the cost of PV, and in most cases, can be substituted for silicon (Si) based on end-of-life (EOL) estimations. Furthermore, where cost is a prime consideration, CIS can become cost effective than gallium arsenide (GaAs) in some applications. Second, investigations into thin film deposition on flexible substrates were made, and data from these tests indicate that fabrication of flexible CIS devices is feasible. Finally, data is also presented on preliminary TCO/CdS/CuInSe2/Mo devices

Fluorine-induced improvement of structural and optical properties of CdTe thin films for solar cell efficiency enhancement

CdTe thin films of different thicknesses were electrodeposited and annealed in air after different chemical treatments to study the effects of thickness and the different chemical treatments on these films for photovoltaic applications. The thicknesses of the samples range from 1.1 μm to 2.1 μm and the annealing process was carried out after prior CdCl2 treatment and CdCl2+CdF2 treatment as well as without any chemical treatment. Detailed optical and structural characterisation of the as-deposited and annealed CdTe thin films using UV-Vis spectrophotometry and x-ray diffraction reveal that incorporating fluorine in the well-known CdCl2 treatment of CdTe produces remarkable improvement in the optical and structural properties of the materials. This CdCl2+CdF2 treatment produced solar cell with efficiency of 8.3% compared to CdCl2 treatment, with efficiency of 3.3%. The results reveal an alternative method of post-deposition chemical treatment of CdTe which can lead to the production of CdTe-based solar cells with enhanced photovoltaic conversion efficiencies compared to the use of only CdCl2. Keywords: CdTe; CdCl2

Electrodeposition of CdTe thin films using nitrate precursor for applications in solar cells

Cadmium telluride (CdTe) thin films have been electrodeposited (ED) on glass/fluorine-doped tin oxide (FTO) substrates using simplified two-electrode system in acidic and aqueous solution containing Cd(NO3)2 4H2O and TeO2. The X-ray diffraction (XRD), optical absorption, photoelectrochemical (PEC) cell measurements, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) have been carried out to study the structural, optical, electrical and morphological properties of the CdTe layers. The XRD study shows that the ED-CdTe layers are polycrystalline with cubic crystal structure. Results obtained from optical absorption reveal that the bandgaps of the as-deposited and the CdCl2 treated CdTe layers are in the ranges ~1.50 to ~1.54 eV and ~1.46 to ~1.51 eV, respectively. Observation from PEC measurements indicates a p-, i- and n-type electrical conductivity for as-deposited CdTe layers grown in the cathodic voltage range (1,247–1,258) mV. The SEM images indicate noticeable change in CdTe grain size from ~85 to ~430 nm after CdCl2 treatment with uniform surface coverage of the glass/FTO substrate. The TEM images show the columnar growth structure for as-deposited and CdCl2 treated CdTe layers. The TEM images also indicate an increase in grain’s diameter from ~50 to ~200 nm after CdCl2 treatment

Optimisation of pH of cadmium chloride post-growth-treatment in processing CDS/CDTE based thin film solar cells

The role of Chlorine-based activation in the production of high quality CdS/CdTe photovoltaic have been well discussed and explored with an overlook of the effect of Cadmium chloride (CdCl2) post-growth treatment acidity on the property of the fabricated devices. This work focuses on the optimisation of CdCl2 post-growth treatment pH as it affects both the material and fabricated device properties of all-electrodeposited multilayer glass/FTO/n-CdS/n-CdTe/p-CdTe configuration. CdCl2 treatments with acidity ranging from pH1 to pH4 were explored. The properties of the ensued CdTe layer were explored using optical, morphological, compositional structural and electrical property analysis, while, the effect on fabricated multilayer glass/FTO/n-CdS/n-CdTe/p-CdTe configuration were also explored using both I-V and C-V measurements. Highest improvements in the optical, morphological, compositional and structural were observed at pH2 CdCl2 post-growth treatment with an improvement in absorption edge, grain size, crystallinity and crystallite size. Conductivity type conversions from n-CdTe to p-CdTe, increase in pin-hole density and collapse of the absorption edge were observed after pH1 CdCl2 treatment. The highest fabricated solar cell efficiency of 13% was achieved using pH2 CdCl2 treatment as compared to other pH values explored

Na incorporation in Mo and CuInSe from production processes

Abstract Results of characterization of thin "lms of Mo deposited by DC magnetron sputtering on soda-lime glass (Mo/SLG) and CuInSe (CIS) on Mo/SLG are presented. The primary objective of the work was to clarify the factors determining the concentration of Na in commercial-grade CIS. Mo "lms were deposited by three laboratories manufacturing CIS thin "lm solar cells. Analysis was by secondary ion mass spectrometry, scanning electron microscopy and X-ray di!raction. Changes in Mo deposition parameters in general a!ected the Na level but there was no obvious link to any single Mo deposition parameter. Oxygen content directly a!ected the Na level. The Na behavior was not obviously connected to "lm preferred orientation. Selenization of the Mo layers was also examined. Elemental Se vapor was found to produce signi"cantly less selenization than H Se. The amount of selenization was also strongly dependent upon Mo deposition conditions, although a speci"c source of the change in reaction rate was not found. Na distributions in the CIS deposited on the Mo were not limited by the di!usivity of the Na. The Na concentration in the CIS was increased by annealing the Mo "lms both with and without intentionally added Na. The Na level in the CIS appears to be set more by the CIS deposition process than by the Na concentration in the Mo so long as the Mo contains su$cient Na to 0927-0248/99/$ -see front matter 1999 Published by Elsevier Science B.V. All rights reserved. PII: S 0 9 2 7 -0 2 4 8 ( 9 9 ) 0 0 0 2 6 -4 saturate the available sites in the CIS. 1999 Published by Elsevier Science B.V. All rights reserved

Optimisation of CdTe electrodeposition voltage for development of CdS/CdTe solar cells

Cadmium telluride (CdTe) thin films have been deposited on glass/conducting glass (FTO) substrates using low-cost two electrode system and aqueous electrodeposition method. The glass/FTO substrates were used to grow the CdTe layers at different deposition voltages. The structural, electrical, optical and morphological properties of the resulting films have been characterized using X-ray diffraction (XRD), Photoelectrochemical (PEC) cell measurements, optical absorption spectroscopy and Scanning Electron Microscopy (SEM). The XRD results indicate that at voltages less than or higher than 1.576 V, crystallinity is poor due to presence of two phases. When CdTe is grown at 1.576 V, the composition is stoichiometric, and the (111) peak has the highest intensity in the XRD diffractogram indicating a high degree of crystallinity. SEM studies showed that all layers had pin-holes and gaps between the grains. These openings seem to be more common in the samples grown at voltages away from the stoichiometric voltage (1.576 V). The linear I–V curves of glass/FTO/CdS/CdTe/Au structures fabricated using stoichiometric CdTe showed efficiency of 10.1 % under AM 1.5 illuminatio

Effects of deposition time and post-deposition annealing on the physical and chemical properties of electrodeposited CdS thin films for solar cell application

CdS thin films were cathodically electrodeposited by means of a two-electrode deposition system for different durations. The films were characterised for their structural, optical, morphological and compositional properties using x-ray diffraction (XRD), spectrophotometry, scanning electron microscopy (SEM) and energy dispersive x-ray (EDX) respectively. The results obtained show that the physical and chemical properties of these films are significantly influenced by the deposition time and post-deposition annealing. This influence manifests more in the as-deposited materials than in the annealed ones. XRD results show that the crystallite sizes of the different films are in the range (9.4 – 65.8) nm and (16.4 – 66.0) nm in the as-deposited and annealed forms respectively. Optical measurements show that the absorption coefficients are in the range (2.7×104 – 6.7×104) cm-1 and (4.3×104 – 7.2×104) cm-1 respectively for as-deposited and annealed films. The refractive index is in the range (2.40 – 2.60) for as-deposited films and come to the value of 2.37 after annealing. The extinction coefficient varies in the range (0.1 – 0.3) in asdeposited films and becomes 0.1 in annealed films. The estimated energy bandgap of the films is in the range (2.48 – 2.50) eV for as-deposited films and becomes 2.42 eV for all annealed films. EDX results show that all the films are S-rich in chemical composition with fairly uniform Cd/S ratio after annealing. The results show that annealing improves the qualities of the films and deposition time can be used to control the film thickness. Keywords: Electrodeposition; two-electrode system; CdS; annealing; deposition time; thin-film

Progress in development of graded bandgap thin film solar cells with electroplated materials

Photovoltaic devices are developed mainly based on p-n or p-i-n type device structures, and these devices can utilise only a fraction of the solar spectrum. In order to further improve device parameters and move towards low-cost and high-efficiency next generation solar cells, device architectures capable of harvesting all photons available should be designed and developed. One such architecture is the fully graded bandgap device structure as proposed recently based on both n-type and p-type window layers. These designs have been experimentally tested using well researched GaAs/AlGaAs system producing impressive device parameters of open circuit voltage (Voc) ~1175 mV and fill factor (FF) ~0.85. The devices have also been experimentally tested for the evidence of impurity photovoltaic (PV) effect and impact ionisation taking place within the same device. Since these structures have been experimentally proved with a well-established semiconductor, the effort has been focussed on developing these devices using low-cost and scalable electroplated semiconductors, in order to minimise manufacturing cost. This paper reviews and summarises the work carried out during the past decade on this subject. Graded bandgap devices produced using only two or three electroplated semiconductor layers have been explored and their conversion efficiencies have gradually increased from 10.0%, through 12.8% to 15.3% for different structures. While the work is progressing along this line, the paper summarises the achievements to date

Scientific complications and controversies noted in the field of CdS/CdTe thin film solar cells and the way forward for further development

Cadmium telluride-based solar cell is the most successfully commercialised thin film solar cell today. The laboratory-scale small devices have achieved ~ 22%, and commercial solar panels have reached ~ 18% conversion efficiencies. However, there are various technical complications and some notable scientific contradictions that appear in the scientific literature published since the early 1970s. This review paper discusses some of these major complications and controversies in order to focus future research on issues of material growth and characterisation, post-growth processing, device architectures and interpretation of the results. Although CdTe can be grown using more than 14 different growth techniques, successful commercialisation has been taken place using close-space sublimation and electrodeposition techniques only. The experimental results presented in this review are mainly based on electrodeposition. Historical trends of research and commercial successes have also been discussed compared to the timeline of novel breakthroughs in this field. Deeper understanding of these issues may lead to further increase in conversion efficiencies of this solar cell. Some novel ideas for further development of thin film solar cells are also discussed towards the end of this paper

Inoculation theory in the post-truth era: Extant findings and new frontiers for contested science, misinformation, and conspiracy theories

Abstract: Although there has been unprecedented attention to inoculation theory in recent years, the potential of this research has yet to be reached. Inoculation theory explains how immunity to counter‐attitudinal messages is conferred by preemptively exposing people to weakened doses of challenging information. The theory has been applied in a number of contexts (e.g., politics, health) in its 50+ year history. Importantly, one of the newest contexts for inoculation theory is work in the area of contested science, misinformation, and conspiracy theories. Recent research has revealed that when a desirable position on a scientific issue (e.g., climate change) exists, conventional preemptive (prophylactic) inoculation can help to protect it from misinformation, and that even when people have undesirable positions, “therapeutic” inoculation messages can have positive effects. We call for further research to explain and predict the efficacy of inoculation theory in this new context to help inform better public understandings of issues such as climate change, genetically modified organisms, vaccine hesitancy, and other contested science beliefs such as conspiracy theories about COVID‐19