18,741 research outputs found
Measurement of minority-carrier drift mobility in solar cells using a modulated electron beam
A determination of diffusivity on solar cells is here reported which utilizes a one dimensional treatment of diffusion under sinusoidal excitation. An intensity-modulated beam of a scanning electron microscope was used as a source of excitation. The beam was injected into the rear of the cell, and the modulated component of the induced terminal current was recovered phase sensitively. A Faraday cup to measure the modulated component of beam current was mounted next to the sample, and connected to the same electronics. A step up transformer and preamplifier were mounted on the sample holder. Beam currents on the order of 400-pA were used in order to minimize effects of high injection. The beam voltage was 34-kV, and the cell bias was kept at 0-V
Narrow band cross-correlation analysis of fluctuating pressures beneath a turbulent boundary layer
Selected band cross correlation analysis of fluctuating pressures under turbulent boundary layer flo
Chimpanzee hand preference for throwing and infant cradling:implications for the origin of human handedness
The star formation history of damped Lyman alpha absorbers
The local power law relationship between the surface densities of neutral
hydrogen gas and star formation rate (SFR) can be used to explore the SFR
properties of damped Lyman alpha (DLA) systems at higher redshift. We find that
while the SFR densities for DLA systems are consistent with luminous star
forming galaxies at redshifts below z~0.6, at higher redshifts their SFR
density is too low for them to provide a significant contribution to the cosmic
star formation history (SFH). This suggests that the majority of DLAs may be a
distinct population from the Lyman break galaxies (LBGs) or submillimeter
star-forming galaxies that together dominate the SFR density at high redshift.
It is also possible that the DLAs do not trace the bulk of the neutral gas at
high redshift. The metallicity properties of DLAs are consistent with this
interpretation. The DLAs show a metal mass density lower by two orders of
magnitude at all redshifts than that inferred from the SFH of the universe.
These results are consistent with DLAs being dominated by low mass systems
having low SFRs or a late onset of star formation, similar to the star
formation histories of dwarf galaxies in the local universe.Comment: 9 pages, 5 figures, accepted for publication in Ap
The motion of interconnected flexible bodies
The equations of motion for an arbitrarily interconnected collection of substructures are derived. The substructures are elastic bodies which may be idealized as finite element assemblies and are subject to small deformations relative to a nominal state. Interconnections between the elastic substructures permit large relative translations and rotations between substructures, governed by Pfaffian constraints describing the connections. Screw connections (permitting rotation about and translation along a single axis) eliminate constraint forces and incorporate modal coupling. The problem of flexible spacecraft simulation is discussed. Hurty's component mode approach is extended by permitting interconnected elastic substructures large motions relative to each other and relative to inertial space. The hybrid coordinate methods are generalized by permitting all substructures to be flexible (rather than only the terminal members of a topological tree of substructures). The basic relationships of continuum mechanics are developed
Microprogram scheme for automatic recovery from computer error
Microprogram scheme enables computer to recover from failure in one of its two central processing units during time duration of instruction in which failure occurs. Microprogram advantages include - /1/ built-in interpretive capability, /2/ selection of processing interrupts by priority, and /3/ economical use of bootstrap sequence
Optimal design of composite hip implants using NASA technology
Using an adaptation of NASA software, we have investigated the use of numerical optimization techniques for the shape and material optimization of fiber composite hip implants. The original NASA inhouse codes, were originally developed for the optimization of aerospace structures. The adapted code, which was called OPORIM, couples numerical optimization algorithms with finite element analysis and composite laminate theory to perform design optimization using both shape and material design variables. The external and internal geometry of the implant and the surrounding bone is described with quintic spline curves. This geometric representation is then used to create an equivalent 2-D finite element model of the structure. Using laminate theory and the 3-D geometric information, equivalent stiffnesses are generated for each element of the 2-D finite element model, so that the 3-D stiffness of the structure can be approximated. The geometric information to construct the model of the femur was obtained from a CT scan. A variety of test cases were examined, incorporating several implant constructions and design variable sets. Typically the code was able to produce optimized shape and/or material parameters which substantially reduced stress concentrations in the bone adjacent of the implant. The results indicate that this technology can provide meaningful insight into the design of fiber composite hip implants
- …