Performance of some Exotic Pear Cultivars under Temperate Conditions of Kashmir

Seven exotic varieties and two commercially grown cultivars of pear grafted on quince were evaluated for various physio-chemical characteristics for two years in the orchard of Department of Horticulture, Srinagar, Jammu and Kashmir. Among various physical characters, Red Anjou recorded maximum fruit length (6.88cm), fruit diameter (5.77cm), fruit weight (111.36g) and fruit volume (118.48cm2), followed by Coscia for all these characters. No significant variation was recorded for L/D ratio among the pear cultivars. Maximum fruit firmness (20.77 lb/inch2) was scored by Cosco-D. Coscia registered maximum TSS (14.04%) along with minimum acidity (0.30%) and highest TSS/acid ratio (46.80). Highest reducing sugar (7.92%) and total sugar (9.26%) was scored by Coscia, followed by William Bartlett as 6.77% of reducing sugar and 7.96% of total sugar. From the present study it is clear, that Red Anjou and Coscia performed well under Kashmir conditions and is suitable for commercial purpose

Home Office Fingerprint Source Book

The Fingerprint Source Book is primarily intended to provide the background and validation for the techniques currently (up to 2016) recommended by the Home Office Centre for Applied Science and Technology (CAST), and to publish, in some cases for the first time, data collected over 45 years of research. It will therefore often present information in an ‘CASTcentric’ way, emphasising research that was carried out at Sandridge or Horseferry House, possibly sometimes at the expense of research carried out elsewhere. It is not the intention of the authors to ignore the significant contributions made by other research groups and apologies are made in advance if this sometimes appears to be the case. The document is also aimed at providing the UK Forensic Science Regulator and the United Kingdom Accreditation Service (UKAS), which has carried out ISO 17025 accreditation in the UK, with the background evidence behind the advice given in the Fingermark Visualisation Manual

The Reed-Stanton press rig for the generation of reproducible fingermarks : towards a standardised methodology for fingermark research

In the search for better or new methods/techniques to visualise fingermarks or to analyse them exploiting their chemical content, fingermarks inter-variability may hinder the assessment of the method effectiveness. Variability is due to changes in the chemical composition of the fingermarks between different donors and within the same donor, as well as to differential contact time, pressure and angle. When validating a method or comparing it with existing ones, it is not always possible to account for this type of variability. One way to compensate for these issues is to employ, in the early stages of the method development, a device generating reproducible fingermarks. Here the authors present their take on such device, as well as quantitatively describing its performance and benefits against the manual production of marks. Finally a short application is illustrated for the use of this device, at the method developmental stages, in an emerging area of fingerprinting research concerning the retrieval of chemical intelligence from fingermarks

Measurement of the viscoelastic properties of blood plasma clot formation in response to tissue factor concentration-dependent activation

© 2016, The Author(s). The coagulation of blood plasma in response to activation with a range of tissue factor (TF) concentrations was studied with a quartz crystal microbalance (QCM), where frequency and half width at half maximum (bandwidth) values measured from the conductance spectrum near resonant frequency were used. Continuous measurement of bandwidth along with the frequency allows for an understanding of the dissipative nature of the forming viscoelastic clot, thus providing information on the complex kinetics of the viscoelastic changes occurring during the clot formation process. Using a mathematical model, these changes in frequency and bandwidth have been used to derive novel QCM parameters of effective elasticity, effective mass density and rigidity factor of the viscoelastic layer. The responses of QCM were compared with those from thromboelastography (TEG) under identical conditions. It was demonstrated that the nature of the clot formed, as determined from the QCM parameters, was highly dependent on the rate of clot formation resulting from the TF concentration used for activation. These parameters could also be related to physical clot characteristics such as fibrin fibre diameter and fibre density, as determined by scanning electron microscopic image analysis. The maximum amplitude (MA) as measured by TEG, which purports to relate to clot strength, was unable to detect these differences

Sample treatment for tissue proteomics in cancer, toxicology, and forensics

Since the birth of proteomics science in the 1990, the number of applications and of sample preparation methods has grown exponentially, making a huge contribution to the knowledge in life science disciplines. Continuous improvements in the sample treatment strategies unlock and reveal the fine details of disease mechanisms, drug potency, and toxicity as well as enable new disciplines to be investigated such as forensic science. This chapter will cover the most recent developments in sample preparation strategies for tissue proteomics in three areas, namely, cancer, toxicology, and forensics, thus also demonstrating breath of application within the domain of health and well-being, pharmaceuticals, and secure societies. In particular, in the area of cancer (human tumor biomarkers), the most efficient and multi-informative proteomic strategies will be covered in relation to the subsequent application of matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) and liquid extraction surface analysis (LESA), due to their ability to provide molecular localization of tumor biomarkers albeit with different spatial resolution. With respect to toxicology, methodologies applied in toxicoproteomics will be illustrated with examples from its use in two important areas: the study of drug-induced liver injury (DILI) and studies of effects of chemical and environmental insults on skin, i.e., the effects of irritants, sensitizers, and ionizing radiation. Within this chapter, mainly tissue proteomics sample preparation methods for LC-MS/MS analysis will be discussed as (i) the use of LC-MS/MS is majorly represented in the research efforts of the bioanalytical community in this area and (ii) LC-MS/MS still is the gold standard for quantification studies. Finally, the use of proteomics will also be discussed in forensic science with respect to the information that can be recovered from blood and fingerprint evidence which are commonly encountered at the scene of the crime. The application of proteomic strategies for the analysis of blood and fingerprints is novel and proteomic preparation methods will be reported in relation to the subsequent use of mass spectrometry without any hyphenation. While generally yielding more information, hyphenated methods are often more laborious and time-consuming; since forensic investigations need quick turnaround, without compromising validity of the information, the prospect to develop methods for the application of quick forensic mass spectrometry techniques such as MALDI-MS (in imaging or profiling mode) is of great interest

Modeling the Responses of TSM Resonators under Various Loading Conditions

We develop a general model that describes the electrical responses of thickness shear mode resonators subject to a variety of surface loadkgs. The model incorporates a physically diverse set of single component loadings, including rigid solids, viscoelastic media and fluids (Newtonian or Maxwellian). The model allows any number of these components to be combined in any configuration. Such multiple loadings are representative of a variety of physical situations encountered in electrochemical and other liquid phase applications, as well as gas phase applications. In the general case, the response of the composite is not a linear combination of the individual component responses. We discuss application of the model in a qualitative diagnostic fashion, to gain insight into the nature of the interracial structure, and in a quantitative fashion, to extract appropriate physical parameters, such as liquid viscosity and density and polymer shear moduli