Clustering in surgical trials : database of intracluster correlations

PMID: 22217216 [PubMed - indexed for MEDLINE] PMCID: PMC3311136 Free PMC ArticlePeer reviewedPublisher PD

Origin of New Broad Raman D and G Peaks in Annealed Graphene

Since graphene, a single sheet of graphite, has all of its carbon atoms on the surface, its property is very sensitive to materials contacting the surface. Herein, we report novel Raman peaks observed in annealed graphene and elucidate their chemical origins by Raman spectroscopy and atomic force microscopy (AFM). Graphene annealed in oxygen-free atmosphere revealed very broad additional Raman peaks overlapping the D, G and 2D peaks of graphene itself. Based on the topographic confirmation by AFM, the new Raman peaks were attributed to amorphous carbon formed on the surface of graphene by carbonization of environmental hydrocarbons. While the carbonaceous layers were formed for a wide range of annealing temperature and time, they could be effectively removed by prolonged annealing in vacuum. This study underlines that spectral features of graphene and presumably other 2-dimensional materials are highly vulnerable to interference by foreign materials of molecular thickness.open116167Nsciescopu

Nanosheet thickness-modulated MoS2 dielectric property evidenced by field-effect transistor performance

We report on the nanosheet-thickness effects on the performance of top-gate MoS2 field-effect transistors (FETs), which is directly related to the MoS2 dielectric constant. Our top-gate nanosheet FETs with 40 nm thin Al2O3 displayed at least an order of magnitude higher mobility than those of bottom-gate nanosheet FETs with 285 nm thick SiO2, benefiting from the dielectric screening by high-k Al2O3. Among the top-gate devices, the single-layered FET demonstrated the highest mobility of similar to 170 cm(2) V-1 s(-1) with 90 mV dec(-1) as the smallest subthreshold swing (SS) but the double-and triple-layered FETs showed only similar to 25 and similar to 15 cm(2) V-1 s(-1) respectively with the large SS of 0.5 and 1.1 V dec(-1). Such property degradation with MoS2 thickness is attributed to its dielectric constant increase, which could rather reduce the benefits from the top-gate high-k dielectric.open115353Nsciescopu

Improvement in photovoltaic performance of rutile-phased TiO2 nanorod/nanoflower-based dye-sensitized solar cell

An improved dye-sensitized solar cell (DSC) of rutile-phased titanium dioxide (TiO2) electrode with increased power conversion efficiency was successfully fabricated. Rutile-phased TiO2 nanorods and nanoflowers were grown directly on fluorine-doped SnO2 (FTO) by simple aqueous chemical growth technique using one-step hydrothermal process. The solution was prepared by mixing hydrochloric acid, deionized water, and titanium butoxide used as precursor. In the preparation of DSC, both TiO2 nanorods and nanoflowers, platinum (Pt), ruthenium dye N719, and DPMII electrolyte were used as photoelectrode, counter electrode, dye solution, and liquid electrolyte, respectively. The prepared rutile-phased TiO2 nanorods and nanoflowers samples were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The DSCs were fabricated based on the rutile-phased titanium dioxide nanorod and nanoflower photoelectrodes. For their energy conversion efficiency, I-V characteristics and electrochemical impedance spectroscopy were studied. We also investigated the effect of cetyltrimethylammonium bromide (CTAB) reaction times 2, 5, and 10 h in the preparation of rutile-phased TiO2 nanoflowers for DSC. CTAB is one of the capping agents that cover the refine surface of nanoparticles and prevent them from coagulation or aggregation. In our final result, the combination of rutile-phased TiO2 nanorod- and nanoflower-based DSCs showed best efficiency at approximately 3.11% due to its good electron transport of TiO2 nanorods and increased surface area by the TiO2 nanoflowers that had increased dye absorption

In situ characterisation of surface roughness and its amplification during multilayer single-track laser powder bed fusion additive manufacturing

Surface roughness controls the mechanical performance and durability (e.g., wear and corrosion resistance) of laser powder bed fusion (LPBF) components. The evolution mechanisms of surface roughness during LPBF are not well understood due to a lack of in situ characterisation methods. Here, we quantified key processes and defect dynamics using synchrotron X-ray imaging and ex situ optical imaging and explained the evolution mechanisms of side-skin and top-skin roughness during multi-layer LPBF of Ti-6Al-4V (where down-skin roughness was out of the project scope). We found that the average surface roughness alone is not an accurate representation of surface topology of an LPBF component and that the surface topology is multimodal (e.g., containing both roughness and waviness) and multiscale (e.g., from 25 µm sintered powder features to 250 µm molten pool wavelength). Both roughness and topology are significantly affected by the formation of pre-layer humping, spatter, and rippling defects. We developed a surface topology matrix that accurately describes surface features by combining 8 different metrics: average roughness, root mean square roughness, maximum profile peak height, maximum profile valley height, mean height, mean width, skewness, and melt pool size ratio. This matrix provides a guide to determine the appropriate linear energy density to achieve the optimum surface finish of Ti-6Al-4V thin-wall builds. This work lays a foundation for surface texture control which is critical for build design, metrology, and performance in LPBF

Impact of BRCA1/2 cascade testing on anxiety, depression, and cancer worry levels among unaffected relatives in a multiethnic Asian cohort

Cascade testing for families with BRCA pathogenic variants is important to identify relatives who are carriers. These relatives can benefit from appropriate risk management and preventative strategies arising from an inherited increased risk of breast, ovarian, prostate, melanoma, and pancreatic cancers. Cascade testing has the potential to enable cost-effective cancer control even in low- and middle-income settings, but few studies have hitherto evaluated the psychosocial impact of cascade testing in an Asian population, where the cultural and religious beliefs around inheritance and destiny have previously been shown to influence perception and attitudes toward screening. In this study, we evaluated the short- and long-term psychosocial impact of genetic testing among unaffected relatives of probands identified through the Malaysian Breast Cancer Genetics Study and the Malaysian Ovarian Cancer Study, using validated questionnaires (Hospital Anxiety and Depression Scale and Cancer Worry Scale) administered at baseline, and 1-month and 2-year post-disclosure of results. Of the 305 unaffected relatives from 98 independent families who were offered cascade testing, 256 (84%) completed predictive testing and family history of cancers was the only factor significantly associated with uptake of predictive testing. We found that the levels of anxiety, depression, and cancer worry among unaffected relatives decreased significantly after result disclosure and remained low 2-year post-result disclosure. Younger relatives and relatives of Malay descent had higher cancer worry at both baseline and after result disclosure compared to those of Chinese and Indian descent, whereas relatives of Indian descent and those with family history of cancers had higher anxiety and depression levels post-result disclosure. Taken together, the results from this Asian cohort highlight the differences in psychosocial needs in different communities and inform the development of culture-specific genetic counseling strategies

Herpes simplex virus hepatitis after solid organ transplantation in adults

Twelve patients developed herpes simplex (HSV) hepatitis a median of 18 days after solid organ transplantation. This is earlier than cytomegalovirus hepatitis, which usually occurs 30-40 days after transplantation. Eight recipients (67%) died, and in seven, the diagnosis was made at autopsy or <48 h before death. Clinical manifestations associated with mortality were hypotension, disseminated intravascular coagulation (DIC), metabolic acidosis, gastrointestinal bleeding, and bacteremia. Laboratory abnormalities at diagnosis associated with mortality were high creatinine, low platelet counts, prolonged partial thromboplastin time, and a high percentage of band forms on the blood smear. Disseminated HSV disease was noted in four of six patients who had an autopsy and included involvement of lungs in three and the gastrointestinal tract in three. Five recipients developed DIC and all died. Pathologically, HSV hepatitis has two forms, focal and diffuse. All three patients with diffuse liver pathology died. However, three of seven with focal liver pathology survived with antiviral therapy, which suggests that early diagnosis and treatment may be lifesaving. None of these patients had received prophylactic acyclovir. It is possible that acyclovir prophylaxis may be able to prevent this disease. © 1991 by The University of Chicago

Formation of artificial pores in nano-TiO2 photo-electrode films using acetylene-black for high-efficiency, dye-sensitized solar cells

Acetylene-black paste without a light scattering layer was applied to meso-porous TiO2 photo-electrode films with a crystalline framework, a low residual carbon, and a tunable morphological pore size. The thermal-treated TiO2 photo-electrode films had an increased acetylene-black concentration with an increase in artificial pores and a decrease in residual carbon. The performance of dye-sensitized solar cells (DSSCs) was enhanced by the use of the TiO2 photo-anode pastes at various acetylene-black concentrations. The photo-conversion efficiency of the DSSCs using TiO2 photo-electrode films with 1.5 wt% acetylene-black was enhanced from 7.98 (no acetylene-black) to 9.75% without the integration of a light-scattering layer.open5

Designing an information system for updating land records in Bangladesh: action design ethnographic research (ADER)

Open Access. This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.This article has been made available through the Brunel Open Access Publishing Fund.Information Systems (IS) has developed through adapting, generating and applying diverse methodologies, methods, and techniques from reference disciplines. Further, Action Design Research (ADR) has recently developed as a broad research method that focuses on designing and redesigning IT and IS in organizational contexts. This paper reflects on applying ADR in a complex organizational context in a developing country. It shows that ADR requires additional lens for designing IS in such a complex organizational context. Through conducting ADR, it is seen that an ethnographic framework has potential complementarities for understanding complex contexts thereby enhancing the ADR processes. This paper argues that conducting ADR with an ethnographic approach enhances design of IS and organizational contexts. Finally, this paper aims presents a broader methodological framework, Action Design Ethnographic Research (ADER), for designing artefacts as well as IS. This is illustrated through the case of a land records updating service in Bangladesh

BPS dyons and Hesse flow

We revisit BPS solutions to classical N=2 low energy effective gauge theories. It is shown that the BPS equations can be solved in full generality by the introduction of a Hesse potential, a symplectic analog of the holomorphic prepotential. We explain how for non-spherically symmetric, non-mutually local solutions, the notion of attractor flow generalizes to gradient flow with respect to the Hesse potential. Furthermore we show that in general there is a non-trivial magnetic complement to this flow equation that is sourced by the momentum current in the solution.Comment: 25 pages, references adde