Band-structure topologies of graphene: spin-orbit coupling effects from first principles

The electronic band structure of graphene in the presence of spin-orbit coupling and transverse electric field is investigated from first principles using the linearized augmented plane-wave method. The spin-orbit coupling opens a gap at the $K(K')$-point of the magnitude of 24 $\mu$eV (0.28 K). This intrinsic splitting comes 96% from the usually neglected $d$ and higher orbitals. The electric field induces an additional (extrinsic) Bychkov-Rashba-type splitting of 10 $\mu$eV (0.11 K) per V/nm, coming from the $\sigma$-$\pi$ mixing. A 'mini-ripple' configuration with every other atom is shifted out of the sheet by less than 1% differs little from the intrinsic case.Comment: 4 pages, 4 figure

Microbial control of caged population of Zonocerus variegatus using Beauveria bassiana and Metarhizium sp

Microbial control of caged populations of Zonocerus variegatus was carried out using indigenous fungal entomopathogens isolated from the grasshopper's cadaver. Bioassay response indicated a dose-dependent mortality coupled with drastic reduction in food consumption among spores infected grasshoppers. Lethal time (LT 50 ) of 4.6 days for 10 3 spores/ml and 3.8 days for 10 7 spores/ml of oil formulation of Beauveria bassiana were observed. While Metarhizium sp recorded LT 50 of 9.0 days and 2.8 days for 10 3 and 10 7 spores/ml, respectively. The results obtained were discussed in relation to use of the isolates in the control Z. variegatus infestation in forest agro-ecosystem of south west, Nigeria

Successful fiber sensing technologies and hot topics for the near future

Inside the Photonics field Optical Fiber Sensors (OFS) are currently being used and will still be used in the future in a wide number of applications because its properties present technical advantages over traditional techniques or, sometimes, is practically the only feasible solution. In this paper, the more successful techniques will be reviewed. Then a prospective for the near future of the market and hot topics in which invest research resources will be suggested

Iron Status and Analysis of Efficacy and Safety of Ferric Carboxymaltose Treatment in Patients with Inflammatory Bowel Disease

Background and Aims:We analyzed iron deficiency and the therapeutic response following intravenous ferric carboxymaltose in a large single-center inflammatory bowel disease (IBD) cohort. Methods: 250 IBD patients were retrospectively analyzed for iron deficiency and iron deficiency anemia. A subgroup was analyzed regarding efficacy and side effects of iron supplementation with ferric carboxymaltose. Results: In the cohort (n = 250), 54.4% of the patients had serum iron levels 60 mu g/dl, 61.6% had ferritin >100 ng/ml, and 90.7% reached Hb >12/13 g/dl at follow-up (p < 0.0001 for all parameters vs. pretreatment values). The most frequent adverse event was a transient increase of liver enzymes with male gender as risk factor (p = 0.008, OR 8.62, 95% CI 1.74-41.66). Conclusions: Iron deficiency and anemia are frequent in IBD patients. Treatment with ferric carboxymaltose is efficious, safe and well tolerated in iron-deficient IBD patients. Copyright (C) 2011 S. Karger AG, Base

Graphite and Hexagonal Boron-Nitride Possess the Same Interlayer Distance. Why?

Graphite and hexagonal boron nitride (h-BN) are two prominent members of the family of layered materials possessing a hexagonal lattice. While graphite has non-polar homo-nuclear C-C intra-layer bonds, h-BN presents highly polar B-N bonds resulting in different optimal stacking modes of the two materials in bulk form. Furthermore, the static polarizabilities of the constituent atoms considerably differ from each other suggesting large differences in the dispersive component of the interlayer bonding. Despite these major differences both materials present practically identical interlayer distances. To understand this finding, a comparative study of the nature of the interlayer bonding in both materials is presented. A full lattice sum of the interactions between the partially charged atomic centers in h-BN results in vanishingly small monopolar electrostatic contributions to the interlayer binding energy. Higher order electrostatic multipoles, exchange, and short-range correlation contributions are found to be very similar in both materials and to almost completely cancel out by the Pauli repulsions at physically relevant interlayer distances resulting in a marginal effective contribution to the interlayer binding. Further analysis of the dispersive energy term reveals that despite the large differences in the individual atomic polarizabilities the hetero-atomic B-N C6 coefficient is very similar to the homo-atomic C-C coefficient in the hexagonal bulk form resulting in very similar dispersive contribution to the interlayer binding. The overall binding energy curves of both materials are thus very similar predicting practically the same interlayer distance and very similar binding energies.Comment: 18 pages, 5 figures, 2 table

Magnetic correlations and quantum criticality in the insulating antiferromagnetic, insulating spin liquid, renormalized Fermi liquid, and metallic antiferromagnetic phases of the Mott system V_2O_3

Magnetic correlations in all four phases of pure and doped vanadium sesquioxide V_2O_3 have been examined by magnetic thermal neutron scattering. While the antiferromagnetic insulator can be accounted for by a Heisenberg localized spin model, the long range order in the antiferromagnetic metal is an incommensurate spin-density-wave, resulting from a Fermi surface nesting instability. Spin dynamics in the strongly correlated metal are dominated by spin fluctuations in the Stoner electron-hole continuum. Furthermore, our results in metallic V_2O_3 represent an unprecedentedly complete characterization of the spin fluctuations near a metallic quantum critical point, and provide quantitative support for the SCR theory for itinerant antiferromagnets in the small moment limit. Dynamic magnetic correlations for energy smaller than k_BT in the paramagnetic insulator carry substantial magnetic spectral weight. However, the correlation length extends only to the nearest neighbor distance. The phase transition to the antiferromagnetic insulator introduces a sudden switching of magnetic correlations to a different spatial periodicity which indicates a sudden change in the underlying spin Hamiltonian. To describe this phase transition and also the unusual short range order in the paramagnetic state, it seems necessary to take into account the orbital degrees of freedom associated with the degenerate d-orbitals at the Fermi level in V_2O_3.Comment: Postscript file, 24 pages, 26 figures, 2 tables, accepted by Phys. Rev.

A comparison of diagnostic tests for lactose malabsorption - which one is the best?

<p>Abstract</p> <p>Background</p> <p>Perceived milk intolerance is a common complaint, and tests for lactose malabsorption (LM) are unreliable. This study assesses the agreement between diagnostic tests for LM and describes the diagnostic properties of the tests.</p> <p>Methods</p> <p>Patients above 18 years of age with suspected LM were included. After oral intake of 25 g lactose, a combined test with measurement of serum glucose (s-glucose) and hydrogen (H2) and methane (CH4) in expired air was performed and symptoms were recorded. In patients with discrepancies between the results, the combined test was repeated and a gene test for lactose non-persistence was added. The diagnosis of LM was based on an evaluation of all tests. The following tests were compared: Increase in H2, CH4, H2+CH4 and H2+CH4x2 in expired air, increase in s-glucose, and symptoms. The agreement was calculated and the diagnostic properties described.</p> <p>Results</p> <p>Sixty patients were included, seven (12%) had LM. The agreement (kappa-values) between the methods varied from 0.25 to 0.91. The best test was the lactose breath test with measurement of the increase in H2 + CH4x2 in expired air. With a cut-off level < 18 ppm, the area under the ROC-curve was 0.967 and sensitivity was 100%. This shows that measurement of CH4 in addition to H2 improves the diagnostic properties of the breath test.</p> <p>Conclusion</p> <p>The agreement between commonly used methods for the diagnosis of LM was unsatisfactory. A lactose breath test with measurement of H2 + CH4x2 in expired air had the best diagnostic properties.</p

A novel method for standardized application of fungal spore coatings for mosquito exposure bioassays

<p>Abstract</p> <p>Background</p> <p>Interest in the use of fungal entomopathogens against malaria vectors is growing. Fungal spores infect insects via the cuticle and can be applied directly on the insect to evaluate infectivity. For flying insects such as mosquitoes, however, application of fungal suspensions on resting surfaces is more realistic and representative of field settings. For this type of exposure, it is essential to apply specific amounts of fungal spores homogeneously over a surface for testing the effects of fungal dose and exposure time. Contemporary methods such as spraying or brushing spore suspensions onto substrates do not produce the uniformity and consistency that standardized laboratory assays require. Two novel fungus application methods using equipment developed in the paint industry are presented and compared.</p> <p>Methods</p> <p>Wired, stainless steel K-bars were tested and optimized for coating fungal spore suspensions onto paper substrates. Different solvents and substrates were evaluated. Two types of coating techniques were compared, i.e. manual and automated coating. A standardized bioassay set-up was designed for testing coated spores against malaria mosquitoes.</p> <p>Results</p> <p>K-bar coating provided consistent applications of spore layers onto paper substrates. Viscous Ondina oil formulations were not suitable and significantly reduced spore infectivity. Evaporative Shellsol T solvent dried quickly and resulted in high spore infectivity to mosquitoes. Smooth proofing papers were the most effective substrate and showed higher infectivity than cardboard substrates. Manually and mechanically applied spore coatings showed similar and reproducible effects on mosquito survival. The standardized mosquito exposure bioassay was effective and consistent in measuring effects of fungal dose and exposure time.</p> <p>Conclusions</p> <p>K-bar coating is a simple and consistent method for applying fungal spore suspensions onto paper substrates and can produce coating layers with accurate effective spore concentrations. The mosquito bioassay was suitable for evaluating fungal infectivity and virulence, allowing optimizations of spore dose and exposure time. Use of this standardized application method will help achieve reliable results that are exchangeable between different laboratories.</p