56,001 research outputs found
Energy saving: From engineering to crop management
In greenhouse horticulture, energy costs form an increasingly larger part of the total production costs. Energy is primarily used for temperature control, reduction of air humidity, increase of light intensity and CO2 supply. Use of fossil energy can be reduced by limiting the energy demand of the system and decreasing energy losses, by intelligent climate control, by increasing the energy efficiency of the crop and by replacing fossil energy sources by sustainable ones. Energy requirement of the greenhouse can be lowered up to 20-30% by using greenhouse covers with higher insulating values and the use of energy screens. A prerequisite is that these materials should not involve considerable light loss, since this would result in a loss of production. In energy efficient greenhouse concepts, durable energy sources should be included. In (semi-)closed greenhouses, the excess of solar energy in summer is collected and stored in aquifers to be reused in winter to heat the greenhouse. Ventilation windows are closed, with specific benefits to the crop: high CO2 levels can be maintained, and temperature and humidity can be controlled to the needs of the crop. Development of new greenhouse concepts is ongoing. Current examples are greenhouse systems which convert natural energy sources such as solar energy into high-value energy such as electricity. Given a certain technical infrastructure of the greenhouse, energy consumption can be further reduced by energy efficient climate control and crop management. Essential elements are to allow fluctuating temperatures, lower crop transpiration, allow higher humidities, make efficient use of light and create fluent transitions in set points. Consequences for plant growth are related to rate of development, photosynthesis, assimilate distribution, transpiration and the occurrence of diseases or disorders. Since processes involved are complex, knowledge exchange between researchers and growers is essential to realize the goals set to reduce the energy consumption
Evaluation of the causes of error in the MCD45 burned-area product for the savannas of northern South America [Evaluación de las causas de error en el producto de área quemada MCD45 para las sabanas del norte de Suramérica]
Forest fires contribute to deforestation and have been considered a significant source of CO2 emissions. There are global maps that estimate the area affected by a fire using the reflectance variation of the surface. In this study, we evaluated the reliability and the causes of error of the MCD45 Burned Area Product, by applying the confusion matrix method to the Orinoco River Basin. This basin is located in the northern zone of South America, and consists mainly of savanna ecosystems. For the evaluation, we used as reference data five pairs of Landsat images, covering 165,000 km2. The Burned Area Product estimated a burned area of 7,576.43 km2, which is lower than the area of 12,100.16 km2 found with Landsat images, leading to an overall underestimation. The causes of error are associated to the spatial resolution of the map, and to some structures of the algorithm that generates the map
Composition and diversity of spring-active carabid beetle assemblages in relation to soil management in organic wheat fields in Denmark
Patterns in spring-active carabid assemblages were described in relation to four organic soil management regimes (no soil nutrient addition, undersowing, animal manure, undersowing + manure) in two areas of Denmark. On the island of Zealand, the Flakkebjerg study area had 22 species, 3-10 species/trap, and the species rank of these was the same for all treatments. The dominant species were Pterostichus melanarius, Agonum dorsale, Harpalus rufipes and Calathus fuscipes. At Foulum, Jutland, there were 46 species, 12-15 species/ trap, dominated by P. versicolor, P. melanarius, A. dorsale and Nebria brevicollis. Their rank, however, was not the same for all treatments. There were remarkable differences in the carabid assemblages of the two sites, and manure addition modified the assemblages, more pronouncedly so in the poorer-soil Flakkebjerg site. However, we did not detect clear effects of the studied treatments on carabid species richness, overall abundance or Pterostichus melanarius alone
Searching for invariants using genetic programming and mutation testing
Invariants are concise and useful descriptions of a program's behaviour. As most programs are not annotated with invariants, previous research has attempted to automatically generate them from source code. In this paper, we propose a new approach to invariant generation using search. We reuse the trace generation front-end of existing tool Daikon and integrate it with genetic programming and a mutation testing tool. We demonstrate that our system can find the same invariants through search that Daikon produces via template instantiation, and we also find useful invariants that Daikon does not. We then present a method of ranking invariants such that we can identify those that are most interesting, through a novel application of program mutation
Investigation of liquid-liquid demixing and aggregate formation in a membrane-forming system by means of pulse-induced critical scattering (PICS)
Phase separation phenomena in the quasi-ternary system cellulose acetate (CA)/dioxane/water, used as a typical system in the preparation of polymeric membranes for ultrafiltration and reverse osmosis applications, were investigated by means of pulse-induced critical scattering (PICS). Both the cloud point curve and spinodal curve were determined for CA concentrations up to 20% (w/w). The influence of maleic acid (used as an additive in order to improve the membrane performance) on the position of the binodal and spinodal curves and the demixing kinetics were investigated
Higher Spin BRS Cohomology of Supersymmetric Chiral Matter in D=4
We examine the BRS cohomology of chiral matter in , supersymmetry
to determine a general form of composite superfield operators which can suffer
from supersymmetry anomalies. Composite superfield operators \Y_{(a,b)} are
products of the elementary chiral superfields and \ov S and the
derivative operators D_\a, \ov D_{\dot \b} and \pa_{\a \dot \b}. Such
superfields \Y_{(a,b)} can be chosen to have `' symmetrized undotted
indices \a_i and `' symmetrized dotted indices \dot \b_j. The result
derived here is that each composite superfield \Y_{(a,b)} is subject to
potential supersymmetry anomalies if is an odd number, which means that
\Y_{(a,b)} is a fermionic superfield.Comment: 15 pages, CPT-TAMU-20/9
Production and FCNC decay of supersymmetric Higgs bosons into heavy quarks in the LHC
We analyze the production and subsequent decay of the neutral MSSM Higgs
bosons (h = h^0, H^0, A^0) mediated by flavor changing neutral currents (FCNC)
in the LHC collider. We have computed the h-production cross-section times the
FCNC branching ratio, \sigma(pp -> h -> qq') = \sigma(pp -> h) B(h -> qq'), in
the LHC focusing on the strongly-interacting FCNC sector. Here qq' is an
electrically neutral pair of quarks of different flavors, the dominant modes
being those containing a heavy quark: tc or bs. We determine the maximum
production rates for each of these modes and identify the relevant regions of
the MSSM parameter space, after taking into account the severe restrictions
imposed by low energy FCNC processes. The analysis of \sigma(pp -> h -> qq')
singles out regions of the MSSM parameter space different from those obtained
by maximizing only the branching ratio, due to non-trivial correlations between
the parameters that maximize/minimize each isolated factor. The production
rates for the bs channel can be huge for a FCNC process (0.1-1 pb), but its
detection can be problematic. The production rates for the tc channel are more
modest (10^{-3}-10^{-2} pb), but its detection should be easier due to the
clear-cut top quark signature. A few thousand tc events could be collected in
the highest luminosity phase of the LHC, with no counterpart in the SM.Comment: 25 pages, 9 figures, 2 tables, LaTeX 2e. Typos corrected. Version to
appear in JHE
Implementation of a novel online condition monitoring thermal prognostic indicator system
This research aims to develop a reliable and robust online condition monitoring thermal prognostic indicator system which will reduce the risk of failures in a Power System Network. Real-time measurements (weather conditions, temperature of the cable joints or terminations, loading demand) taken close to underground cable will update the prognostic simulation model. Anomalies of the measurements along the cable will be compared with the predicted ones hence indicating a possible degradation activity in the cable. The use of such systems within a power networks will provide a smarter way of prognostic condition monitoring in which you measure less and model more. The use of suggested thermal models will enable the power network operators to maximize asset utilization and minimize constraint costs in the system
Prognostic indication of power cable degradation
The reliability and the health performance of network assets are of a great interest due to power network operators. This project investigates methods of developing a prognostic capability for evaluating the health and long term performance of ageing distribution cable circuits. From the instant of installation and operation, the insulating materials of a cable will begin to age as a result of a combination of mechanical, thermal and electrical factors. Development of simulation models can significantly improve the accuracy of prognostics, allowing the targeting of maintenance and reduction of in service failures [1]. Real-time measurements taken close to underground cables can update the simulation models giving a more accurate prognostic model.Currently the project investigates a thermal prognostic simulation model which will predict the likely temperature impact on a cable at burial depth according to weather conditions and known loading. Anomalies of temperature measurements along the cable compared to predicted temperatures will indicate a possible degradation activity in a cable. An experimental surface trough has been set up where operation of power cables is simulated with a control system which is able to model any cable loading. The surface temperature of the cable is continuously monitored as well as the weather conditions such as solar radiation, soil moisture content, wind speed, humidity, rainfall and air-temperature<br/
- …