Atomic-scale visualization of initial growth of homoepitaxial SrTiO3 thin film on an atomically ordered substrate

The initial homoepitaxial growth of SrTiO3 on a (\surd13\times\surd13) - R33.7{\deg}SrTiO3(001) substrate surface, which can be prepared under oxide growth conditions, is atomically resolved by scanning tunneling microscopy. The identical (\surd13\times\surd13) atomic structure is clearly visualized on the deposited SrTiO3 film surface as well as on the substrate. This result indicates the transfer of the topmost Ti-rich (\surd13\times\surd13) structure to the film surface and atomic-scale coherent epitaxy at the film/substrate interface. Such atomically ordered SrTiO3 substrates can be applied to the fabrication of atom-by-atom controlled oxide epitaxial films and heterostructures

Fluorescence multispectral imaging-based diagnostic system for atherosclerosis

Background: Composition of atherosclerotic arterial walls is rich in lipids such as cholesterol, unlike normal arterial walls. In this study, we aimed to utilize this difference to diagnose atherosclerosis via multispectral fluorescence imaging, which allows for identification of fluorescence originating from the substance in the arterial wall. Methods: The inner surface of extracted arteries (rabbit abdominal aorta, human coronary artery) was illuminated by 405 nm excitation light and multispectral fluorescence images were obtained. Pathological examination of human coronary artery samples were carried out and thickness of arteries were calculated by measuring combined media and intima thickness. Results: The fluorescence spectra in atherosclerotic sites were different from those in normal sites. Multiple regions of interest (ROI) were selected within each sample and a ratio between two fluorescence intensity differences (where each intensity difference is calculated between an identifier wavelength and a base wavelength) from each ROI was determined, allowing for discrimination of atherosclerotic sites. Fluorescence intensity and thickness of artery were found to be significantly correlated. Conclusions: These results indicate that multispectral fluorescence imaging provides qualitative and quantitative evaluations of atherosclerosis and is therefore a viable method of diagnosing the disease

The electronic state of vortices in YBa2Cu3Oy investigated by complex surface impedance measurement

The electromagnetic response to microwaves in the mixed state of YBa2Cu3Oy(YBCO) was measured in order to investigate the electronic state inside and outside the vortex core. The magnetic-field dependence of the complex surface impedance at low temperatures was in good agreement with a general vortex dynamics description assuming that the field-independent viscous damping force and the linear restoring force were acting on the vortices. In other words, both real and imaginary parts of the complex resistivity, \rho_1, and \rho_2, were linear in B. This is explained by theories for d-wave superconductors. Using analysis based on the Coffey-Clem description of the complex penetration depth, we estimated that the vortex viscosity \eta at 10 K was (4 \sim 5) \times 10^{-7} Ns/m^2. This value corresponds to \omega_0 \tau \sim 0.3 - 0.5, where \omega_0 and \tau are the minimal gap frequency and the quasiparticle lifetime in the vortex core, respectively. These results suggest that the vortex core in YBCO is in the moderately clean regime. Investigation of the moderately clean vortex core in high-temperature superconductors is significant because physically new effects may be expected due to d-wave characteristics and to the quantum nature of cuprate superconductors. The behavior of Z_s as a function of B across the first order transition (FOT) of the vortex lattice was also investigated. Unlike Bi2Sr2CaCu2Oy (BSCCO), no distinct anomaly was observed around the FOT in YBCO. Our results suggest that the rapid increase of X_s due to the change of superfluid density at the FOT would be observed only in highly anisotropic two-dimensional vortex systems like BSCCO. We discuss these results in terms of the difference of the interlayer coupling and the energy scale between the two materials.Comment: 10 pages, 6 figures, to be published in Phys. Rev. B, one reference adde

Real space imaging of the metal - insulator phase separation in the band width controlled organic Mott system κ\kappa-(BEDT-TTF)2_{2}Cu[N(CN)2_{2}]Br

Systematic investigation of the electronic phase separation on macroscopic scale is reported in the organic Mott system $\kappa$-(BEDT-TTF)$_{2}$Cu[N(CN)$_{2}$]Br. Real space imaging of the phase separation is obtained by means of scanning micro-region infrared spectroscopy using the synchrotron radiation. The phase separation appears near the Mott boundary and changes its metal-insulator fraction with the substitution ratio $x$ in $\kappa$-[($h$-BEDT-TTF)$_{1-x}$($d$-BEDT-TTF)$_{x}$]$_{2}$Cu[N(CN)$_{2}$]Br, of which band width is controlled by the substitution ratio $x$ between the hydrogenated BEDT-TTF molecule ($h$-BEDT-TTF) and the deuterated one ($d$-BEDT-TTF). The phase separation phenomenon observed in this class of organics is considered on the basis of the strongly correlated electronic phase diagram with the first order Mott transition.Comment: 10 pages, 8 figure

Direct observation of the washboard noise of a driven vortex lattice in a high-temperature superconductor, Bi2Sr2CaCu2Oy

We studied the conduction noise spectrum in the vortex state of a high-temperature superconductor, Bi2Sr2CaCu2Oy, subject to a uniform driving force. Two characteristic features, a broadband noise (BBN) and a narrow-band noise (NBN), were observed in the vortex-solid phase. The origin of the large BBN was determined to be plastic motion of the vortices, whereas the NBN was found to originate from the washboard modulation of the translational velocity of the driven vortices. We believe this to be the first observation ofComment: 4 pages, 4 figures, to appear in Phys. Rev. Let