Structure of W3(OH) from Very High Spectral Resolution Observations of 5 Centimeter OH Masers

Recent studies of methanol and ground-state OH masers at very high spectral resolution have shed new light on small-scale maser processes. The nearby source W3(OH), which contains numerous bright masers in several different transitions, provides an excellent laboratory for high spectral resolution techniques. We present a model of W3(OH) based on EVN observations of the rotationally-excited 6030 and 6035 MHz OH masers taken at 0.024 km/s spectral resolution. The 6.0 GHz masers are becoming brighter with time and show evidence for tangential proper motions. We confirm the existence of a region of magnetic field oriented toward the observer to the southeast and find another such region to the northeast in W3(OH), near the champagne flow. The 6.0 GHz masers trace the inner edge of a counterclockwise rotating torus feature. Masers at 6030 MHz are usually a factor of a few weaker than at 6035 MHz but trace the same material. Velocity gradients of nearby Zeeman components are much more closely correlated than in the ground state, likely due to the smaller spatial separation between Zeeman components. Hydroxyl maser peaks at very long baseline interferometric resolution appear to have structure on scales both smaller than that resolvable as well as on larger scales.Comment: 21 pages using emulateapj.cls including 16 figures and 2 tables, accepted to Ap

Effelsberg Observations of Excited-State (6.0 GHz) OH in Supernova Remnants and W3(OH)

While masers in the 1720 MHz transition of OH are detected toward many supernova remnants (SNRs), no other OH transition is seen as a maser in SNRs. We present a search for masers at 6049 MHz, which has recently been predicted to produce masers by pure collisional excitation at conditions similar to that required for 1720 MHz masing. The Effelsberg 100 m telescope was used to observe the excited-state 6016, 6030, 6035, and 6049 MHz lines of OH toward selected SNRs, most of which have previously-detected bright 1720 MHz masers. No excited-state masers are found toward SNRs, consistent with previous observations of the 6049 MHz and other excited-state transitions. We do not see clear evidence of absorption toward SNR target positions, although we do see evidence of absorption in the molecular cloud at +50 km/s near Sgr A East. Weak absorption is detected at 6016 MHz toward W3(OH), while stronger, narrower emission is seen at 6049 MHz, suggesting that the 6049 MHz emission is a low-gain maser. We conclude that conditions in SNRs are not conducive to excited-state maser emission, especially in excited-state satellite lines.Comment: 4 pages using emulateapj.cls including 2 tables and 1 figure, accepted to ApJ

Nanorheology : an Investigation of the Boundary Condition at Hydrophobic and Hydrophilic Interfaces

t has been shown that the flow of a simple liquid over a solid surface can violate the so-called no-slip boundary condition. We investigate the flow of polar liquids, water and glycerol, on a hydrophilic Pyrex surface and a hydrophobic surface made of a Self-Assembled Monolayer of OTS (octadecyltrichlorosilane) on Pyrex. We use a Dynamic Surface Force Apparatus (DSFA) which allows one to study the flow of a liquid film confined between two surfaces with a nanometer resolution. No-slip boundary conditions are found for both fluids on hydrophilic surfaces only. Significant slip is found on the hydrophobic surfaces, with a typical length of one hundred nanometers.Comment: 8 pages, 7 figures, 2 tables. Accepted for European Physical Journal E - Sofr Mate

A search for 4750- and 4765-MHz OH masers in Southern Star Forming Regions

We have used the Australia Telescope Compact Array (ATCA) to make a sensitive (5-$\sigma$ $\simeq$ 100 mJy) search for maser emission from the 4765-MHz $^2\Pi_{1/2}$ F=1$\to$0 transition of OH. Fifty five star formation regions were searched and maser emission with a peak flux density in excess of 100 mJy was detected toward fourteen sites, with ten of these being new discoveries. In addition we observed the 4750-MHz $^2\Pi_{1/2}$ F=1$\to$1 transition towards a sample of star formation regions known to contain 1720-MHz OH masers, detecting marginal maser emission from G348.550-0.979. If confirmed this would be only the second maser discovered from this transition. The occurrence of 4765-MHz OH maser emission accompanying 1720-MHz OH masers in a small number of well studied star formation regions has lead to a general perception in the literature that the two transitions favour similar physical conditions. Our search has found that the presence of the excited-state 6035-MHz OH transition is a much better predictor of 4765-MHz OH maser emission from the same region than is 1720-MHz OH maser emission. Combining our results with those of previous high resolution observations of other OH transitions we have examined the published theoretical models of OH masers and find that none of them predict any conditions in which the 1665-, 6035- and 4765-MHz transitions are simultaneously inverted. Erratum abstract: Dodson & Ellingsen (2002) included several observations with significant pointing errors, invalidating the upper limits found in these directions. These have now been reobserved or recalculated. A new table of upper limits has been generated, and two more masers that would have been seen have been found.Comment: Included an Erratum with Max as another author. This erratum was rejected by MNRAS (Feb 04) as it contained too much data. Resubmitted as a paper (Jun 04). Rejected (Sep 04) it had too little data. Resubmitted as reduced erratum (Apr 05). Still waitin

EVLA Observations of OH Masers in ON 1

This Letter reports on initial Expanded Very Large Array (EVLA) observations of the 6035 MHz masers in ON 1. The EVLA data are of good quality, lending confidence in the new receiver system. Nineteen maser features, including six Zeeman pairs, are detected. The overall distribution of 6035 MHz OH masers is similar to that of the 1665 MHz OH masers. The spatial resolution is sufficient to unambiguously determine that the magnetic field is strong (~ -10 mG) at the location of the blueshifted masers in the north, consistent with Zeeman splitting detected in 13441 MHz OH masers in the same velocity range. Left and right circularly polarized ground-state features dominate in different regions in the north of the source, which may be due to a combination of magnetic field and velocity gradients. The combined distribution of all OH masers toward the south is suggestive of a shock structure of the sort previously seen in W3(OH).Comment: 4 pages using emulateapj.cls including 2 tables and 2 color figure

Energy versus information based estimations of dissipation using a pair of magnetic colloidal particles

Using the framework of stochastic thermodynamics, we present an experimental study of a doublet of magnetic colloidal particles which is manipulated by a time-dependent magnetic field. Due to hydrodynamic interactions, each bead experiences a state-dependent friction, which we characterize using a hydrodynamic model. In this work, we compare two estimates of the dissipation in this system: the first one is energy based since it relies on the measured interaction potential, while the second one is information based since it uses only the information content of the trajectories. While the latter only offers a lower bound of the former, we find it to be simple to implement and of general applicability to more complex systems.Comment: Main text: 5 pages, 4 figures. Supplementary material: 5 pages, 5 figure

Dynamics of cholesteric structures in an electric field

Motivated by Lehmann-like rotation phenomena in cholesteric drops we study the transverse drift of two types of cholesteric fingers, which form rotating spirals in thin layers of cholesteric liquid crystal in an ac or dc electric field. We show that electrohydrodynamic effects induced by Carr-Helfrich charge separation or flexoelectric charge generation can describe the drift of cholesteric fingers. We argue that the observed Lehmann-like phenomena can be understood on the same basis.Comment: 4 pages, 4 figures, submitted to PR

Crowdsourcing User-Contributed Solutions to Aerospace Product Development Issues through Micro-Blogging

Revenue and production output of the United Kingdom’s Aerospace Industry (AI) is growing year on year and the need to develop new products and innovative enhancements to existing ranges is creating a critical need for the increased utilisation and sharing of employee knowledge. The capture of employee knowledge within the UK’s AI is vital if it is to retain its pre-eminent position in the global marketplace. Crowdsourcing, as a collaborative problem solving activity, allows employees to capture explicit knowledge from colleagues and teams and also offers the potential to extract previously unknown tacit knowledge in a less formal virtual environment. By using micro-blogging as a mechanism, a conceptual framework is proposed to illustrate how companies operating in the AI may improve the capture of employee knowledge to address production-related problems through the use of crowdsourcing. Subsequently, the framework has been set against the background of the product development process proposed by Maylor in 1996 and illustrates how micro-blogging may be used to crowdsource ideas and solutions during product development. Initial validation of the proposed framework is reported, using a focus group of 10 key actors from the collaborating organisation, identifying the perceived advantages, disadvantages and concerns of the framework; results indicate that the activity of micro-blogging for crowdsourcing knowledge relating to product development issues would be most beneficial during product conceptualisation due to the requirement for successful innovation

A business process modelling approach to improve OEM and supplier collaboration

Nowadays, Small and Medium sized Enterprises (SMEs) are facing fast changes in technological advancement. These changes encourage them to be more innovative and to offer their Original Equipment Manufacturers (OEMs) quality products with ever shorter deadlines, which is not an easy task. This project (BENEFITS) aims to provide innovative solutions to keep the most exploitable SME’s skills within its local regions. This paper focuses on Business Process Modeling (BPM) and process interactions during the development phases of innovative products. Due to the specific needs and requirements in terms of Product Lifecycle Management (PLM)-based solutions for SMEs and OEMs, this work explores the relationship between them and their suppliers, based on ICT technologies and focuses on SMEs adoption of PLM. Such relationship needs the Business Process Modeling and Notation (BPMN) for representing all tasks that must be done for the collaborative process planning. Two existing information models (NIST and PPRO) serve as an information model to investigate the way of implementing design processes in the context of PLM