117 research outputs found

    Nitrogen/palladium-codoped TiO² for efficient visible light photocatalytic dye degradation

    Get PDF
    Please refer to full text to view abstrac

    Conjugation of isoniazid to a zinc phthalocyanine via hydrazone linkage for pH-dependent liposomal controlled release

    Get PDF
    Tuberculosis (TB) remains the leading cause of mortality from infectious diseases. Extended TB treatment and frequent adverse effects, due to poor bioavailability of anti-tubercular drugs (ATBDs), represent the main rationales behind liposomal encapsulation for controlled delivery. Liposomes have been reported as potential vehicles for targeted delivery of ATBDs due to their rapid uptake by macrophages, which are known as the main host cells for TB causative agent (Mycobacterium tuberculosis). Additionally, the need for controlled release of ATBDs arises because leakage is part of the key liposome challenges for hydrophilic compounds like isoniazid (INH). In this study, INH was conjugated to a highly hydrophobic photosensitizer, zinc (II) phthalocyanine (PC), through hydrazone bonding. The obtained conjugate (PC–INH) was encapsulated in liposomes by film hydration method. PC–INH loaded liposomes (PILs) were characterized using dynamic light scattering, transmission electron microscopy, energy-dispersive X-ray spectrometry and UV–Vis absorption spectrometry, which was used also for estimation of encapsulation efficiency (%EE). INH release was evaluated in different pH media using dialysis. Particle size, zeta potential and %EE of PILs were about 506 nm, − 55 mV and 72%, respectively. Over 12 h, PILs exhibited 22, 41, 97 and 100% of INH, respectively, released in pH 7.4, 6.4, 5.4 and 4.4 media. This pH-dependent behavior is attractive for site-specific delivery. These findings suggest the conjugation of chemotherapeutics to phthalocyanines using pH-labile linkages as a potential strategy for liposomal controlled release

    Encapsulation of isoniazid-conjugated phthalocyanine-In-cyclodextrin-in-liposomes using heating method

    Get PDF
    Liposomes are reputed colloidal vehicles that hold the promise for targeted delivery of anti-tubercular drugs (ATBDs) to alveolar macrophages that host Mycobacterium tuberculosis. However, the costly status of liposome technology, particularly due to the use of special manufacture equipment and expensive lipid materials, may preclude wider developments of therapeutic liposomes. In this study, we report efficient encapsulation of a complex system, consisting of isoniazid-hydrazone-phthalocyanine conjugate (Pc-INH) in gamma-cyclodextrin (γ-CD), in liposomes using crude soybean lecithin by means of a simple organic solvent-free method, heating method (HM). Inclusion complexation was performed in solution and solid-state, and evaluated using UV-Vis, magnetic circular dichroism, 1H NMR, diffusion ordered spectroscopy and FT-IR. The HM-liposomes afforded good encapsulation efficiency (71%) for such a large Pc-INH/γ-CD complex (PCD) system. The stability and properties of the PCD-HM-liposomes look encouraging; with particle size 240 nm and Zeta potential −57 mV that remained unchanged upon storage at 4 °C for 5 weeks. The release study performed in different pH media revealed controlled release profiles that went up to 100% at pH 4.4, from about 40% at pH 7.4. This makes PCD-liposomes a promising system for site-specific ATBD delivery, and a good example of simple liposomal encapsulation of large hydrophobic compounds

    Un-functionalized gold nanoparticles as a simple colorimetric probe for sensitive and selective detection of dopamine

    Get PDF
    A dopamine (DA) colorimetric probe based on the growth and aggregation of un-functionalized gold nanoparticles (AuNPs) is reported. Upon addition of AuNPs to dopamine at various concentrations, the shape, size and colour change of the nanoparticles results in spectral shifts to higher wavelengths and hence colour change is the mode of detection. The colour change can be easily observed by the naked eye from as low as 5.0 nM DA, even under sub-optimal conditions. Under optimal pH conditions the calculated limit of detection was 2.5 nM (3σ). The probe was successfully applied to whole blood sample and showed good selectivity and sensitivity towards DA. The simple, sensitive and selective probe could be an excellent alternative for on-site and immediate detection of DA without the use of instrumentation and would thus be useful for rapid diagnostic applications

    A colorimetric probe for dopamine based on gold nanoparticles-electrospun nanofibre composite

    Get PDF
    An easily prepared solid state colorimetric probe for detecting the neurotransmitter dopamine (DA) was developed. The probe, in the form of an electrospun Nylon−6 (N6) nanofibre with embedded un−functionalized gold nanoparticles (UF−AuNPs) produces a clear colour change in the presence of a DA that is detectable by the naked eye. Characterisation of the nanofibre using UV/vis spectroscopy and electron microscopy (TEM) confirmed the formation of the AuNPs in the polymer solution, and that the AuNPs were completely encapsulated within the composite nanofibres before exposure to the analytes. The probe exhibited very high sensitivity towards DA resulting in colour change of the composite fibres from purple to navy blue/black even under low concentrations of DA. The probe was also selective to DA since the colour remained unchanged in the presence of commonly encountered interfering species such as ascorbic acid, uric acid, catechol, epinephrine and norepinephrine. Moreover, the colour change was observed rapid, occurring either immediately on contact with higher concentrations (5 x10−4 M) or within about 3−5 min for the lower concentrations (e.g. 5 x10−7 M). Since this probe does not require the use of any instruments, and is both rapid and stable over time, it can be applied in the field by an inexperienced person

    Cytotoxicity, phytochemical analysis and antioxidant activity of crude extracts from Rhizomes of Elephantorrhiza Elephantina and Pentanisia Prunelloides

    Get PDF
    Background: Elephantorrhiza elephantina (Ee) and Pentanisia prunelloides (Pp) are two medicinal plants which are widely used to remedy various ailments including diarrhoea, dysentery, inflammation, fever, rheumatism, heartburn, tuberculosis, haemorrhoids, skin diseases, perforated peptic ulcers and sore joints in southern Africa (South Africa, Swaziland, Botswana and Zimbabwe). The following study was conducted to explore the in vitro cytotoxicity, antioxidant properties and phytochemical profile of the two medicinal plants. Materials and Methods: The cytotoxicity of the aqueous and methanol extracts and fractions of both species was studied using the brine shrimp lethality tests (BST) for the first time. Results: The results demonstrated that the lethality (LC50) for crude extracts for both plants ranged between 1.8 and 5.8 ppm and was relatively greater than that for the methanol, ethyl acetate and chloroform fractions of the extracts which ranged between 2.1 ppm and 27 ppm. This suggested that crude extracts were more potent than their respective fractions, further explaining that the different fractions of phytochemicals in these plant species work jointly (in synergy) to exert their therapeutic efficacy. Both aqueous and methanol extracts of the two medicinal plants demonstrated a high degree of antioxidant capacity against the DPPH radical with the Duh and Yen inhibition percentage ranging between 4.5% and 72%. Phytochemical studies of the rhizome extracts showed that the major compounds present include flavonoids, tannins, anthocyanidins, anthraquinones, triterpenoids (oleanolic acid), the steroidal saponin Diosgenin, the sugars, rhamnose, glucuronic acid, Arabinose and hexoses. Conclusion: This is the first report of the detection and isolation of diosgenin and oleanolic acid from the rhizome extracts of Ee and Pp. All structures were determined using spectroscopic/spectrometric techniques (1H NMR and 13C and LC-ESI-MS) and by comparison with literature data

    Beneficial effects of medicinal plants in fish diseases

    Get PDF
    Fish are constantly in contact with pathogens inhabiting water. High populationdensity as well as poor hydrodynamic conditions and feeding lead to an increased sensitivitytowards infections. In order to prevent major economic losses due to diseases, variousmedications are used for treatment and prevention of infections. The use of antimicrobialdrugs in aquacultures could lead to emergence of resistance in pathogenic microorganisms.Alternatives are being sought over the last few years to replace antibiotics, and medicinalplants are one of available options for this purpose. These plants are rich in secondarymetabolites and phytochemical compounds, which have an effect against viral, bacterial, andparasitic diseases in fish. Their main advantage is their natural origin and most of these plantsdo not represent threat for human health, the fish, and the environment. The goal of this reviewis to present information on the treatment of viral, bacterial, and parasitic diseases in fishthrough medicinal plants, with focus on the mechanisms of action of the identified secondarymetabolites, fractions, or plant extracts

    Mg/Triethylammonium Formate: A Useful System for Reductive Dimerization of Araldehydes into Pinacols;Nitroarenes into Azoarenes and Azoarenes into Hydrazoarenes

    Get PDF
    Studies are reported which describes the effectiveness of triethylammonium formate in the presence of magnesium for the efficient intermolecular pinacol coupling using MeOH as solvent. Various aromatic carbonyls underwent smooth reductive coupling to give the corresponding 1,2-diols. A series of azo compounds were obtained by the reductive coupling of nitroaromatics while azo compounds were reduced to the corresponding hydrazoarenes by this system. There was no adverse effect on the other reducible and hydrogenolysable groups such as ether linkage, hydroxy and halogens. The reactions are clean, high yielding and inexpensive. All the reactions proceeded smoothly at ambient temperature

    Blending problem-based learning and peer-led team learning, in an open ended ‘home-grown’pharmaceutical chemistry case study

    Get PDF
    Pharmaceutical chemistry, medicinal chemistry and the drug discovery process require experienced practitioners to employ reasoned speculation in generating creative ideas, which can be used to evolve promising molecules into drugs. The ever-evolving world of pharmaceutical chemistry requires university curricula that prepare graduates for their role as designers with the capability of applying complex concepts in pharmaceutical chemistry, thereby improving the decision-making process. Common methods of teaching drug discovery, including the linear nature of the traditional case study model, do not provide a realistic picture of the underlying complexity of the process, nor do they equip students with the appropriate tools for personal sense making and abstraction. In this work, we discuss the creation of an open-ended, nonlinear case study for 3rd year pharmaceutical chemistry students, developed from drug discovery research conducted at Rhodes University. Furthermore, we discuss blending problem based learning (PBL) with peer-led team learning (PLTL) in the context of curriculum transformation, underpinned by the theory of semantic waves, to assist students in the early attainment of abstract concepts and answer questions of contextualisation, personal sense making, relatability, relevance and ultimately the skills for lifelong learning

    Rapid Synthesis of Thiol-Co-Capped-CdTe/CdSe/ZnSe Core Shell-Shell Nanoparticles

    Get PDF
    CdTe QDs has been demonstrated in many studies to possess good outstanding optical and photo-physical properties. However, it has been established from literature that the toxic Cd2+ that tends to leak out into nearby solutions can be protected by less toxic ZnS or ZnSe shells leading to the synthesis of core-shells and multi-core-shells. Hence, this has allowed the synthesis of CdTe multi-core-shells to have gained much interest. The preparation of most CdTe multi-core-shells reported from various studies usually has a longer reaction time (6–24 h) in reaching their highest emission maxima. The synthesis of CdTe multi-core-shells in this study only took 35 min to obtain a highest emission maximum compared to what has been reported from the literature. CdTe multi-core-shells were synthesized by injecting 7, 14, and 21 mL each of Zn complex solution and Se ions into the reacting mixture containing CdTe core-shells (3 h) at 5 min intervals over a 35 min reaction time. The emission maxima of the MPA-TGA-CdTe multi-core-shells at 21 mL injection was recorded around 625 nm. Therefore, we are reporting the rapid synthesis of five different thiol co-capped CdTe/CdSe/ZnSe multi-core-shell QDs with the highest emission maxima obtained at 35 min reaction time
    • …
    corecore