657 research outputs found
Status Report on Sustainable Airports in the United States: Case Study of Chicago O\u27Hare International Airport
Sustainable policies affect the future of the environment. Airports across the country are focusing on sustainable airport planning to create a sustainable future for aviation by concentrating on the economic, social, and environmental impacts of aviation. Research is conducted through a literature review of sustainable airport planning and conducting a case study of Chicago O’Hare International Airport. Trends relating to sustainable airport planning are described, as well as current and future trends at Chicago O’Hare International Airport. Sources include the City of Chicago’s Department of Aviation and the Federal Aviation Administration, along with other books and scholarly articles. Chicago O’Hare International Airport is a leader in sustainable airport planning through the O’Hare Modernization Program and the Sustainable Airport Manual. Economics play a key role in sustainable airport planning
Alternative Rotational Grazing Systems at the Beef Teaching Farm
Fifty-six acres of central Iowa corn land were seeded to bromegrass and divided with high-tensile wire into eight seven-acre plots. This bromegrass was fertilized with 70 pounds of nitrogen each spring and fall, 1987-1990. In 1991 – 1995, the nitrogen was increased to 80 pounds both spring and fall. The plots were stocked with 1.3 cow/calf pairs per acre in 1987-1991 and 1993–1995, but in 1992 the plots were stocked with 1.55 cow/calf pairs per acre. The pairs were rotated using two distinct schemes among four cells for about 150 days. The plots averaged 607 pounds of net calf weight per acre per year over nine years. Rainfall was quite variable during the grazing seasons and was reflected in calf performance as well as summer feed costs. This intensive rotational grazing system has greatly reduced both weed population and the need for mechanical clipping
Evaluation of fixed sources of variation and estimation of genetic parameters for incidence of bovine respiratory disease in preweaned calves and feedlot cattle
The primary objective of this study was to estimate variance components and heritability of bovine respiratory disease (BRD) incidence in beef calves before weaning and during the finishing phase. The second objective was to investigate the impact of BRD incidence and treatment frequency on performance and carcass traits. Bovine respiratory disease is the biggest and most costly health challenge facing the cattle industry. The 2 populations used consisted of 1,519 preweaned calves and 3,277 head of feedlot cattle. The incidence rate of BRD in preweaned calves was 11.39%, and among treated cattle, 82.1% were treated once, 13.9% were treated twice, and 4.0% were treated 3 times or more. The incidence of BRD (P = 0.35) and the number of treatments (P = 0.77) had no significant effect on weaning BW. Heritability estimates of the entire preweaned population for BRD resistance and number of treatments were 0.11 ± 0.06 and 0.08 ± 0.05, respectively. The genetic correlation estimates for BRD incidence with weaning BW and birth BW were low (−0.02 ± 0.32 and 0.07 ± 0.27, respectively). The same estimate for the number of BRD treatments with weaning BW and birth BW was 0.25 ± 0.35 and 0.30 ± 0.27, respectively. The observed BRD incidence rate for feedlot cattle was observed at 9.43%. Incidence of BRD significantly (P \u3c 0.01) decreased overall and acclimation ADG by 0.06 ± 0.01 kg/d and 0.28 ± 0.03 kg/d, respectively. Carcass traits were also significantly (P \u3c 0.05) affected by BRD incidence; untreated cattle had a 9.1 ± 1.7-kg heavier HCW. Results were similar in the analysis of treatment frequency. The heritability estimate of BRD incidence and the number of treatments were 0.07 ± 0.04 and 0.02 ± 0.03, respectively. Estimates of genetic correlations of BRD incidence with production traits were −0.63 ± 0.22 for acclimation ADG, −0.04 ± 0.23 for on-test ADG, −0.31 ± 0.21 for overall ADG, −0.39 ± 0.21 for final BW, −0.22 ± 0.22 for HCW, −0.03 ± 0.22 for LM area, 0.24 ± 0.25 for fat, and −0.43 ± 0.20 for marbling score. Similar results for the number of treatments and production traits were −1.00 ± 0.68 for acclimation ADG, −0.04 ± 0.39 for on-test ADG, −0.47 ± 0.41 for overall ADG, −0.66 ± 0.40 for final BW, −0.58 ± 0.45 for HCW, −0.12 ± 0.38 for LM area, 0.42 ± 0.50 for fat, and −0.32 ± 0.37 for marbling score. Because of the high economic cost associated with BRD incidence, even these modest estimates for heritability of BRD resistance should be considered for incorporation into beef cattle breeding programs
syn-Dispiro[1,3-dioxolane-2,17′-pentacyclo[12.2.1.16,9.02,13.05,10]octadecane-18′,2′′-[1,3]dioxolane]-7′,15′-diene
The title compound, C22H28O4, is composed of a central octadecane ring and two spiro[bicyclo[2.2.1]hept[2]ene-7,2′-[1,3]dioxolane] units. This polycycle has pseudo twofold symmetry and the central cyclooctane ring has a distorted boat configuration
Additively Manufactured Carbon Fiber- Reinforced Thermoplastic Composite Mold Plates For Injection Molding Process
Polymer injection molding processes have been used to create high-volume parts quickly and efficiently. Injection molding uses mold plates that are traditionally made of very hard tool steels, such as P20 steel, which is extremely heavy and has very long lead times to build new molds. In this study, composite-based additive manufacturing (CBAM) was used to create mold plates using long-fiber carbon fiber and polyether ether ketone (PEEK). These mold plates were installed in an injection molding machine, and rectangular flat plates were produced using Lustran 348 acrylonitrile butadiene styrene (ABS). Tensile and flexural testing was performed on these parts as well as parts produced using traditional P20 steel mold plates with the same geometry to compare the performance of the different mold plates. The parts produced using the carbon fiber mold plates were within 5% of the tensile strength and 10% of the flexural strength of the traditionally manufactured parts. However, the parts produced using the carbon fiber mold plates required additional cooling time due to the lower conductivity of the carbon fiber composite compared to the P20 steel. This allows additively manufactured composite molds to be a good substitute for conventional molds in low-volume injection molding production
Pro-active Meeting Assistants: Attention Please!
This paper gives an overview of pro-active meeting assistants, what they are and when they can be useful. We explain how to develop such assistants with respect to requirement definitions and elaborate on a set of Wizard of Oz experiments, aiming to find out in which form a meeting assistant should operate to be accepted by participants and whether the meeting effectiveness and efficiency can be improved by an assistant at all. This paper gives an overview of pro-active meeting assistants, what they are and when they can be useful. We explain how to develop such assistants with respect to requirement definitions and elaborate on a set of Wizard of Oz experiments, aiming to find out in which form a meeting assistant should operate to be accepted by participants and whether the meeting effectiveness and efficiency can be improved by an assistant at all
Teacher Self-Efficacy for Teaching Students With Autism Spectrum Disorder: Associations with Stress, Teacher Engagement, and Student IEP Outcomes Following COMPASS Consultation
Although teachers reporting high teaching self-efficacy demonstrate positive teaching behaviors, minimal stress, and superior classroom management techniques, surprisingly few studies have demonstrated a relationship between teacher self-efficacy and student outcomes. This study explored self-efficacy specific to teaching students with autism spectrum disorder (ASD), and examined relationships with stress, teacher engagement, and student individualized education program (IEP) outcomes. Special education teachers (N = 44) were recruited as part of a larger study examining a consultation intervention. Results indicated that self-efficacy for teaching students with ASD was significantly and positively correlated with teacher engagement and student outcomes, and negatively correlated with teacher stress. Furthermore, teachers who received the consultation intervention reported higher levels of self-efficacy for teaching students with ASD. This is the first study to report a direct association between teacher self-efficacy and student IEP outcomes and the potential positive impact of a teacher consultation intervention on the teacher intrapersonal factor of self-efficacy
High-throughput screen using a single-cell tyrosine phosphatase assay reveals biologically active inhibitors of tyrosine phosphatase CD45
Many cellular signaling events are regulated by tyrosine phosphorylation and mediated by the opposing actions of protein tyrosine kinases and phosphatases. Protein tyrosine phosphatases are emerging as drug targets, but poor cell permeability of inhibitors has limited the development of drugs targeting these enzymes [Tautz L, et al. (2006) Expert Opin Ther Targets 10:157–177]. Here we developed a method to monitor tyrosine phosphatase activity at the single-cell level and applied it to the identification of cell-permeable inhibitors. The method takes advantage of the fluorogenic properties of phosphorylated coumaryl amino propionic acid (pCAP), an analog of phosphotyrosine, which can be incorporated into peptides. Once delivered into cells, pCAP peptides were dephosphorylated by protein tyrosine phosphatases, and the resulting cell fluorescence could be monitored by flow cytometry and high-content imaging. The robustness and sensitivity of the assay was validated using peptides preferentially dephosphorylated by CD45 and T-cell tyrosine phosphatase and available inhibitors of these two enzymes. The assay was applied to high-throughput screening for inhibitors of CD45, an important target for autoimmunity and infectious diseases [Hermiston ML, et al. (2003) Annu Rev Immunol 21:107–137]. We identified four CD45 inhibitors that showed activity in T cells and macrophages. These results indicate that our assay can be applied to primary screening for inhibitors of CD45 and of other protein tyrosine phosphatases to increase the yield of biologically active inhibitors
Blockade of adenosine A2B receptors ameliorates murine colitis
Background and purpose: The adenosine 2B (A2B) receptor is the predominant adenosine receptor expressed in the colon. Acting through the A2B receptor, adenosine mediates chloride secretion, as well as fibronectin and interleukin (IL)-6 synthesis and secretion in intestinal epithelial cells. A2B receptor mRNA and protein expression are increased during human and murine colitis. However, the effect of the A2B receptor in the activation of the intestinal inflammatory response is not known. In this study, we examined the effect of A2B receptor antagonism on murine colitis. Experimental approach: Dextran sodium sulphate (DSS)-treated mice and piroxicam-treated IL-10/ mice were used as animal models of colitis. The A2B receptor-selective antagonist, ATL-801, was given in the diet. Key results: Mice fed ATL-801 along with DSS showed a significantly lower extent and severity of colitis than mice treated with DSS alone, as shown by reduced clinical symptoms, histological scores, IL-6 levels and proliferation indices. The administration of ATL-801 prevented weight loss, suppressed the inflammatory infiltrate into colonic mucosa and decreased epithelial hyperplasia in piroxicam-treated IL-10/ mice. IL-6 and keratinocyte-derived chemokine (KC) concentrations in the supernatants of colonic organ cultures from colitic mice were significantly reduced by ATL-801 administration. Conclusions and implications: Taken together, these data demonstrate that the intestinal epithelial A2B receptor is an important mediator of pro-inflammatory responses in the intestine and that A2B receptor blockade may be an effectiv
- …