Research on CdZnTe and Other Novel Room Temperature Gamma Ray Spectrometer Materials

Room temperature gamma-ray spectrometers are being developed for a number of years for national security applications where high sensitivity, low operating power and compactness are indispensable. The technology has matured now to the point where large volume (several cubic centimeters) and high energy resolution (approximately 1% at 660 eV) of gamma photons, are becoming available for their incorporation into portable systems for remote sensing of signatures from nuclear materials

A CdZnTeSe Gamma Spectrometer Trained by Deep Convolutional Neural Network for Radioisotope Identification

We report the implementation of a deep convolutional neural network to train a high-resolution room-temperature CdZnTeSe based gamma ray spectrometer for accurate and precise determination of gamma ray energies for radioisotope identification. The prototype learned spectrometer consists of a NI PCI 5122 fast digitizer connected to a pre-amplifier to recognize spectral features in a sequence of data. We used simulated preamplifier pulses that resemble actual data for various gamma photon energies to train a CNN on the equivalent of 90 seconds worth of data and validated it on 10 seconds worth of simulated data

Coherent states of P{\"o}schl-Teller potential and their revival dynamics

A recently developed algebraic approach for constructing coherent states for solvable potentials is used to obtain the displacement operator coherent state of the P\"{o}schl-Teller potential. We establish the connection between this and the annihilation operator coherent state and compare their properties. We study the details of the revival structure arising from different time scales underlying the quadratic energy spectrum of this system.Comment: 13 pages, 6 figure

Strontium and barium iodide high light yield scintillators

Europium-doped strontium and barium iodide are found to be readily growable by the Bridgman method and to produce high scintillation light yields

Summary of the Activities of the Working Group I on High Energy and Collider Physics

This is a summary of the projects undertaken by the Working Group I on High Energy Collider Physics at the Eighth Workshop on High Energy Physics Phenomenology (WHEPP8) held at the Indian Institute of Technology, Mumbai, January 5-16, 2004. The topics covered are (i) Higgs searches (ii) supersymmetry searches (iii) extra dimensions and (iv) linear collider.Comment: summary of Working Group I at the Eighth Workshop on High Energy Physics Phenomenology (WHEPP8), I.I.T., Mumbai, January 5-16, 200

Evaluation of a general three-denominator Lewis integral

An integral of the type ∫dq(q2+μ20)1+1(|q—q1|2+μ21)m+1(|q—q2|2+μ22)n+1 is expressed by contour integration as a sum of two finite series for any finite values of 1, m, n, thus avoiding parametric differentiation of a complicated closed form expression with respect to μ0, μ1, μ2. This integral is frequently encountered in studies of atomic, molecular, nuclear and plasma physics

Performance Study of Virtual Frisch Grid CdZnTeSe Detectors

Nuclear detectors for x-ray and gamma-ray spectroscopy and imaging are a vital tool in many homeland security, medical imaging, astrophysics and other applications. Most of these applications require room-temperature operation due to the operational constraints imposed by a cryogenic cooling system. CdZnTe (CZT) has been the main material with the desired detection properties, and CZT crystals have been used commercially for three decades. However, CdZnTe still suffers from long-standing issues of high densities of performance-limiting intrinsic defects such as Te inclusions and networks of dislocation walls (sub-grain boundaries). A recently invented new quaternary material CdZnTeSe showed excellent material properties for radiation detection. The material was found to be free from dislocation networks, possess reduced Te inclusions, and have better compositional homogeneity. Virtual Frisch grid detectors were fabricated from crystals taken from a CdZnTeSe ingot that was grown by the traveling heater method. The detectors were fabricated from an as-grown ingot, bypassing the post-growth annealing process commonly practiced for industrial-grade CZT. The performances of the detectors were studied with different Frisch grid lengths using an amplifier shaping time ranging from 1–6 µs. The detectors showed high-quality spectroscopic performance with an as-measured energy resolution of ~1.1% at 662 keV for an optimum Frisch grid length of 3 mm. The charge collection was observed to enhance for longer Frisch grids

Modeling an Interwoven Collimator for A 3D Endocavity Gamma Camera

Positron emission tomography (PET) and single-photon emission-computed tomography (SPECT) are important nuclear-medical imaging tools in diagnosing cancers and creating effective treatment plans. Commercially imaging systems are operated externally and can create 3D images of the whole body or of specific organs by rotating the gamma-ray detectors, and then employing software to reconstruct the 3D images from the multiple 2D projections at different angles of view. However, their uses in intraoperative environments or for imaging specific small organs, e.g., the prostate, ovary, and cervix, are limited because of their bulky designs and the long working-distance, hence causing low efficiency and poor spatial-resolution. In such situations, compact imaging devices, e.g., the trans-rectal gamma camera developed at Brookhaven National Laboratory (BNL) and Hybridyne Imaging Technologies, are preferable for detecting intra-prostatic tumors. The camera uses pixilated cadmium zinc telluride (CdZnTe) detectors with a matched parallel-hole collimator. However, their lack of 3D imaging capability limits their use in clinics, because the acquired images cannot be interpreted easily due to missing depth information. Given the constraint on space in such operations, the traditional 3D-image acquisition methods are impractical. For this reason, we designed an interwoven collimator dedicated for 3D imaging using an endocavity probe. This novel collimator allows us to take two or multiple views of a specific organ or tissue without rotating the camera. At the first stage of design for the collimator, we carried out Monte-Carlo simulations to study the response of the collimator and the attached detectors to gamma rays, and then developed a maximum-likelihood-based algorithm for reconstructing 3D images. In this paper, we detail our modeling of the collimator on a cluster Linux computer, and discuss the imaging capability of this novel collimator