556 research outputs found
Investigation of the mechanism of impurity assisted nanoripple formation on Si induced by low energy ion beam erosion
A detailed mechanism of the nanoripple pattern formation on Si substrates generated by thesimultaneous incorporation of pure Fe impurities at low energy (1 keV) ion beam erosion has beenstudied. To understand and clarify the mechanism of the pattern formation, a comparative analysisof the samples prepared for various ion fluence values using two complimentary methods fornanostructure analysis, atomic force microscopy, and grazing incidence small angle x-ray scatteringhas been done. We observed that phase separation of the metal silicide formed during the erosiondoes not precede the ripple formation. It rather concurrently develops along with the ripplestructure. Our work is able to differentiate among various models existing in the literature and providesan insight into the mechanism of pattern formation under ion beam erosion with impurityincorporation
Dynamic characterization of cellulose nanofibrils in sheared and extended semi-dilute dispersions
New materials made through controlled assembly of dispersed cellulose
nanofibrils (CNF) has the potential to develop into biobased competitors to
some of the highest performing materials today. The performance of these new
cellulose materials depends on how easily CNF alignment can be controlled with
hydrodynamic forces, which are always in competition with a different process
driving the system towards isotropy, called rotary diffusion. In this work, we
present a flow-stop experiment using polarized optical microscopy (POM) to
study the rotary diffusion of CNF dispersions in process relevant flows and
concentrations. This is combined with small angle X-ray scattering (SAXS)
experiments to analyze the true orientation distribution function (ODF) of the
flowing fibrils. It is found that the rotary diffusion process of CNF occurs at
multiple time scales, where the fastest scale seems to be dependent on the
deformation history of the dispersion before the stop. At the same time, the
hypothesis that rotary diffusion is dependent on the initial ODF does not hold
as the same distribution can result in different diffusion time scales. The
rotary diffusion is found to be faster in flows dominated by shear compared to
pure extensional flows. Furthermore, the experimental setup can be used to
quickly characterize the dynamic properties of flowing CNF and thus aid in
determining the quality of the dispersion and its usability in material
processes.Comment: 45 pages, 13 figure
Effect of Molecular Organization on the Properties of Fractionated Lignin-Based Thiol–Ene Thermoset Materials
In this study, the combination of sequential solvent fractionation of technical Kraft lignin was followed by allylation of most OH functionalities to give highly functional thermoset resins. All lignin fractions were highly functionalized on the phenolic (≥95%) and carboxylic acid OH (≥85%) and to a significant extent on the aliphatic OH moieties (between 43 and 75%). The resins were subsequently cross-linked using thiol–ene chemistry. The high amount of allyl functionalities resulted in a high cross-link density. Dynamic mechanical analysis measurements showed that the thioether content, directly related to the allyl content, strongly affects the performance of these thermosets with a glass transition temperature () between 81 and 95 °C and with a storage modulus between 1.9 and 3.8 GPa for all thermosets. The lignin fractions and lignin-based thermosets’ morphology, at the nanoscale, was studied by wide-angle X-ray scattering measurements. Two π–π stacking interactions were observed: sandwich (≈4.1–4.7 Å) and T-shaped (≈5.5–7.2 Å). The introduction of allyl functionalities weakens the T-shaped π–π stacking interactions. A new signal corresponding to a distance of ≈3.5 Å was observed in lignin-based thermosets, which was attributed to a thioether organized structure. At the same time, a lignin superstructure was observed with a distance/size corresponding to 7.9–17.5 Å in all samples
Percolation of rigid fractal carbon black aggregates
We examine network formation and percolation of carbon black by means of Monte Carlo simulations and experiments. In the simulation, we model carbon black by rigid aggregates of impenetrable spheres, which we obtain by diffusion-limited aggregation. To determine the input parameters for the simulation, we experimentally characterize the micro-structure and size distribution of carbon black aggregates. We then simulate suspensions of aggregates and determine the percolation threshold as a function of the aggregate size distribution. We observe a quasi-universal relation between the percolation threshold and a weighted average radius of gyration of the aggregate ensemble. Higher order moments of the size distribution do not have an effect on the percolation threshold. We conclude further that the concentration of large carbon black aggregates has a stronger influence on the percolation threshold than the concentration of small aggregates. In the experiment, we disperse the carbon black in a polymer matrix and measure the conductivity of the composite. We successfully test the hypotheses drawn from simulation by comparing composites prepared with the same type of carbon black before and after ball milling, i.e., on changing only the distribution of aggregate sizes in the composites
Impact of lignin source on the performance of thermoset resins
A series of different technical hardwood lignin-based resins have been successfully synthesized, characterized, and utilised to produce thiol-ene thermoset polymers. Firstly, technical lignin was fractionated and allylated, whereafter it was crosslinked with a trifunctional thiol. Structural and morphological characteristics of the lignin fractions were studied by H NMR, P NMR, SEC, FTIR, DSC, TGA, and WAXS. The hardwood lignin fractions have a high content of C5-substituted OH groups. The WAXS studies on lignin fractions revealed the presence of two π-π stacking conformations, sandwiched (4.08–4.25 Å) and T-shaped (6.52–6.91 Å). The presence of lignin superstructures with distances/sizes between 10.5 and 12.8 Å was also identified. The curing reaction of the thermosets was investigated by RT-FTIR. Almost all thermosets (excepting one fraction) reached 95% of the thiol conversion in less than 17 h, revealing the enhanced reactivity of the allylated hardwood lignin samples.
The mechanical properties of the thermosets were investigated by DMA. The curing performance, as well as the final thermoset properties, have been correlated to variations in chemical composition and morphological differences of lignin fractions. The described results clearly demonstrate that technical hardwood lignins can be utilized for these applications, but also that significant differences compared to softwood lignins have to be considered for material design
Design of Hygroscopic Bioplastic Products Stable in Varying Humidities
Hygroscopic biopolymers like proteins and polysaccharides suffer from humidity-dependent mechanical properties. Because humidity can vary significantly over the year, or even within a day, these polymers will not generally have stable properties during their lifetimes. On wheat gluten, a model highly hygroscopic biopolymer material, it is observed that larger/thicker samples can be significantly more mechanically stable than thinner samples. It is shown here that this is due to slow water diffusion, which, in turn, is due to the rigid polymer structure caused by the double-bond character of the peptide bond, the many bulky peptide side groups, and the hydrogen bond network. More than a year is required to reach complete moisture saturation (approximate to 10 wt.%) in a 1 cm thick plate of glycerol-plasticized wheat gluten, whereas this process takes only one day for a 0.5 mm thick plate. The overall moisture uptake is also retarded by swelling-induced mechanical effects. Hence, hygroscopic biopolymers are better suited for larger/thicker products, where the moisture-induced changes in mechanical properties are smeared out over time, to the extent that the product remains sufficiently tough over climate changes, for example, throughout the course of a year
- …