10,197 research outputs found

    Non-Abelian Chern-Simons-Higgs vortices with a quartic potential

    Get PDF
    We have constructed numerically non-Abelian vortices in an SU(2) Chern-Simons-Higgs theory with a quartic Higgs potential. We have analyzed these solutions in detail by means of improved numerical codes and found some unexpected features we did not find when a sixth-order Higgs potential was used. The generic non-Abelian solutions have been generated by using their corresponding Abelian counterparts as initial guess. Typically, the energy of the non-Abelian solutions is lower than that of the corresponding Abelian one (except in certain regions of the parameter space). Regarding the angular momentum, the Abelian solutions possess the maximal value, although there exist non-Abelian solutions which reach that maximal value too. In order to classify the solutions it is useful to consider the non-Abelian solutions with asymptotically vanishing AtA_t component of the gauge potential, which may be labelled by an integer number mm. For vortex number n=3n=3 and above, we have found uniqueness violation: two different non-Abelian solutions with all the global charges equal. Finally, we have investigated the limit of infinity Higgs self-coupling parameter and found a piecewise Regge-like relation between the energy and the angular momentum.Comment: 9 pages, 13 figure

    Wear and friction of TiAlN/VN coatings against Al2O3 in air at room and elevated temperatures

    Get PDF
    TiAlN/VN multilayer coatings exhibit excellent dry sliding wear resistance and low friction coefficient, reported to be associated with the formation of self-lubricating V2O5. To investigate this hypothesis, dry sliding ball-on-disc wear tests of TiAlN/VN coatings on flat stainless steel substrates were undertaken against Al2O3 at 25 C, 300 C and 635 C in air. The coating exhibited increased wear rate with temperature. The friction coefficient was 0.53 at 25 C, which increased to 1.03 at 300 C and decreased to 0.46 at 635 C. Detailed investigation of the worn surfaces was undertaken using site-specific transmission electron microscopy (TEM) via focused ion beam (FIB) microscopy, along with Fourier transform infrared (FTIR) and Raman spectroscopy. Microstructure and tribo-induced chemical reactions at these temperatures were correlated with the coating’s wear and friction behaviour. The friction behaviour at room temperature is attributed to the presence of a thin hydrated tribofilm and the presence of V2O5 at high temperature

    What about the toxines analysis? new strategies for sensing applications using the chemistry of diazonium group

    Get PDF
    Objectives: Typically, the Mouse BioAssay (MBA) is a method widely used in many laboratories for analysis of marine biotoxins together with chromatographic (UPLC-MS) one [1]. The MBA will be banned from December 2014 by the amending Regulation (EC) Nº 2074/2005 of 10th January 2011. Based on this regulation, new alternative methods are required for fast detection of biotoxins in aquatic environment and in shellfish samples. The aim of this research work is to design and to characterize an electrochemical (bio)sensor for rapid and sensitive detection of biotoxins.Financial support from CRUP (E-136/12)-MICINN- International Projects - Mobility (PRI-AIBPT-2011-1096) and MEC (CTQ2011-28157

    A polymer based sensor for phosphate detection in water

    Get PDF
    This paper presents the detection of phosphate (PO4-3) concentration in water by using a commercial quartz crystal microbalance (QCM) sensor that was coated with a novel polymeric affinity layer for the first time. The QCM sensor was exposed to PO4-3 and chloride (Cl-) solutions in various concentrations to investigate the sensitivity of the affinity layer. Changes in the viscosity of a solution, and weak binding of ions onto the polymeric layer eliminated the effect of PO4-3 binding to the polymer and hardened the concentration detection. Therefore, we have proposed a new method in which an intermediate Cl- solution is applied before introducing the PO4-3 solution to detect the concentration level in a continuous flow
    corecore