2,911 research outputs found
Creep of Bulk C--S--H: Insights from Molecular Dynamics Simulations
Understanding the physical origin of creep in calcium--silicate--hydrate
(C--S--H) is of primary importance, both for fundamental and practical
interest. Here, we present a new method, based on molecular dynamics
simulation, allowing us to simulate the long-term visco-elastic deformations of
C--S--H. Under a given shear stress, C--S--H features a gradually increasing
shear strain, which follows a logarithmic law. The computed creep modulus is
found to be independent of the shear stress applied and is in excellent
agreement with nanoindentation measurements, as extrapolated to zero porosity
Decommissioning of the ASTRA research reactor: Dismantling the auxiliary systems and clearance and reuse of the buildings
The paper presents work performed in the last phase of the decommissioning of the ASTRA research reactor at the Austrian Research Centers Seibersdorf. Dismantling the pump room installations and the ventilation system, as well as the clearance of the buildings is described. Some conclusions and summary data regarding the timetable, material management, and the cost of the entire project are also presented
Multiscale Poromechanics of Wet Cement Paste
Capillary effects such as imbibition-drying cycles impact the mechanics of
granular systems over time. A multiscale poromechanics framework was applied to
cement paste, that is the most common building material, experiencing broad
humidity variations over the lifetime of infrastructure. First, the liquid
density distribution at intermediate to high relative humidities is obtained
using a lattice gas density functional method together with a realistic
nano-granular model of cement hydrates. The calculated adsorption/desorption
isotherms and pore size distributions are discussed and compare well to
nitrogen and water experiments. The standard method for pore size distribution
determination from desorption data is evaluated. Then, the integration of the
Korteweg liquid stress field around each cement hydrate particle provided the
capillary forces at the nanoscale. The cement mesoscale structure was relaxed
under the action of the capillary forces. Local irreversible deformations of
the cement nano-grains assembly were identified due to liquid-solid
interactions. The spatial correlations of the nonaffine displacements extend to
a few tens of nm. Finally, the Love-Weber method provided the homogenized
liquid stress at the micronscale. The homogenization length coincided with the
spatial correlation length nonaffine displacements. Our results on the solid
response to capillary stress field suggest that the micronscale texture is not
affected by mild drying, while local irreversible deformations still occur.
These results pave the way towards understanding capillary phenomena induced
stresses in heterogeneous porous media ranging from construction materials,
hydrogels to living systems.Comment: 6 figures in main text, 4 figures in the SI appendi
Dienstleistungsgewerkschaft ver.di: neue Wege - neue Aufgaben für Gewerkschaften?
In der dritten Märzwoche entscheidet sich das Schicksal von ver.di. Mit der Gründung der Dienstleistungsgewerkschaft wird, nach Meinung von Franz Bsirske, Vorsitzender der ÖTV und designierter Vorsitzender der neuen Gewerkschaft, und Roland Issen, Vorsitzender der DAG, eine Chance eröffnet, der gewerkschaftlichen Interessenvertretung im Dienstleistungssektor neue Impulse zu geben und auf den Strukturwandel der Arbeitswelt zu reagieren. Dr. Werner Sesselmeier, Universität Darmstadt, sieht die Zukunft der Gewerkschaft vor allem in der »Erschließung neuer Arbeitnehmergruppen«.Gewerkschaft, Dienstleistung, Gewerkschaftspolitik, Gewerkschaftsorganisation
Dialkylketones in paperboard food contact materials—method of analysis in fatty foods and comparative migration into liquid simulants versus foodstuffs
Dialkyl diketene dimers are used as sizing agents in the manufacture of paper and board for food contact applications to increase wetting stability. Unbound residues can hydrolyze and decarboxylate into dialkylketones. These non-intentionally added substances (NIAS) have potential to migrate to fatty foods in contact with those packaging materials. In Germany, the Federal Institute for Risk Assessment (BfR) established a specific migration limit (SML) of 5 mg/kg for the transfer of these dialkylketones into foodstuffs. In order to investigate the differences between simulants and real foods, an analytical method was optimized for extraction and quantification of dialkylketones in edible oils and fatty foods by gas chromatography coupled with flame ionization detection (GC-FID), and additionally by gas chromatography with mass spectrometry (GC-MS), to confirm their identification and to quantify them in case of interferences. Dialkylketones are separated from the extracted fat by alkaline saponification of the triglycerides. Dialkylketones migration from paper-based food contact articles into organic solvents isooctane and dichloromethane, in olive and sunflower oils, and in fatty foods (croissants, Gouda, cheddar cheese, and salami was studied). As a result, it was found that the simulating tests, including the edible oil extraction tests, gave migration values that exceeded the SML largely, while the migration with the food samples were largely below the SML.Antía Lestido Cardama is grateful for her predoctoral grant “Programa de axudas á etapa predoutoral” da Xunta de Galicia (Consellería de Cultura, Educación e Ordenación Universitaria)S
Unravelling CSH atomic structure via computational and experimental physical chemistry
Calcium Silicate Hydrate (CSH) is the main binding phase for the cement paste, which is responsible for its strength and creep behavior. This is a nonstoichiometric hydration phase with calcium to silicon ratio (C/S) ranging from 1 to 2.2. At low C/S ratios, the molecular structure of CSH resembles to that of Tobermorite minerals, whereas in high C/S ratios it mostly looks like disordered glasses. By taking advantage of tools of statistical physics, it is shown that CSH at a given C/S can be associated with degenerate molecular structures called CSH polymorphs. Polymorphs are energetically competitive, i.e., they have the same free energy content, which means they can coexist under equilibrium conditions. To start, SiO2 groups are randomly removed from the layered atomic structure Tobermorite 11A. One hundred and fifty structures are created. Grand Canonical Monte Carlo simulation of water adsorption is performed to adsorb water in the interlayer spacing and nanoscale porosities in defected CSH structures. The amount of adsorbed water scales linearly with the number of defects in the calcium–silicate layer. Samples are relaxed using a reactive potential in canonical and isothermal–isobaric ensembles. We observe that the confined water reacts with the free interlayer calcium atoms and nonbridging oxygen to form hydroxyl groups. The number of hydroxyl groups scales linearly with the amount of defects. The amount of water in CSH and Ca‑OH content match well with drying and Neutron Scattering experiment. Although the reactive modeling of CSH impacts the water molecules in CSH’s nanoconfinement environment, it does not significantly affect the silica chain length. This means that the reactive atomistic modeling does not affect the calico-silicate backbone of CSH structures. The silica mean chain length from atomistic simulation aligns perfectly with experimental NMR data. The elastic properties and hardness of all CSH polymorphs are measured at a given C/S and are directly compared with nano-chemo-mechanical testing via coupled nanoindentation and X-ray WDS. Atomistic simulation matches with the experimental data in both elastic and plastic regimes. The correlation of mechanical properties to structural observables of the molecular structures such as dimer content, mean silicate chain length, density, basal distance, water content, number of hydroxyl groups, and topological constraints parameter are calculated. No direct correlations were found at short ranges. The search was extended to the medium range order analysis and it is found that the polymorphism is closely related to the medium range order of Si‑O bonds
Physical Origins of Thermal Properties of Cement Paste
Despite the ever-increasing interest in multiscale porous materials, the chemophysical origin of their thermal properties at the nanoscale and its connection to the macroscale properties still remain rather obscure. In this paper, we link the atomic- and macroscopic-level thermal properties by combining tools of statistical physics and mean-field homogenization theory. We begin with analyzing the vibrational density of states of several calcium-silicate materials in the cement paste. Unlike crystalline phases, we indicate that calcium silicate hydrates (CSH) exhibit extra vibrational states at low frequencies (<2 THz) compared to the vibrational states predicted by the Debye model. This anomaly is commonly referred to as the boson peak in glass physics. In addition, the specific-heat capacity of CSH in both dry and saturated states scales linearly with the calcium-to-silicon ratio. We show that the nanoscale-confining environment of CSH decreases the apparent heat capacity of water by a factor of 4. Furthermore, full thermal conductivity tensors for all phases are calculated via the Green-Kubo formalism. We estimate the mean free path of phonons in calcium silicates to be on the order of interatomic bonds. This satisfies the scale separability condition and justifies the use of mean-field homogenization theories for upscaling purposes. Upscaling schemes yield a good estimate of the macroscopic specific-heat capacity and thermal conductivity of cement paste during the hydration process, independent of fitting parameters.Portland Cement AssociationNational Ready Mixed Concrete Association (Research and Education Foundation
Bottom-up model of adsorption and transport in multiscale porous media
We develop a model of transport in multiscale porous media which accounts for adsorption in the different porosity scales. This model employs statistical mechanics to upscale molecular simulation and describe adsorption and transport at larger time and length scales. Using atom-scale simulations, which capture the changes in adsorption and transport with temperature, pressure, pore size, etc., this approach does not assume any adsorption or flow type. Moreover, by relating the local chemical potential μ(r) and density ρ(r), the present model accounts for adsorption effects and possible changes in the confined fluid state upon transport. This model constitutes a bottom-up framework of adsorption and transport in multiscale materials as it (1) describes the adsorption-transport interplay, (2) accounts for the hydrodynamics breakdown at the nm scale, and (3) is multiscale.France. Investissements d'avenir (ICoME2/ANR-11-LABX-0053)France. Investissements d'avenir (A*NUDEX/ANR-11-IDEX-0001-02)Schlumberger FoundationShell Oil Compan
- …