Phenolic Compounds From Brewer's Spent Grains:Toward Green Recovery Methods and Applications in the Cosmetic Industry

Brewers' spent grain (BSG) is the main by-product derived from the brewing industry, where it accounts for 85% of the total waste generated. The total annual production worldwide of this waste is 39 million tons. This lignocellulosic material is traditionally used as cattle feed and sold at a low retail price (~USD 45.00 per ton). However, efforts for the revalorization of this by-product are emerging since research has established that it can be used as a low-cost source of bioactive molecules and commodity chemicals that can bring value to integral biorefinery ventures. Among commodities, phenolic compounds have attracted attention as added-value products due to their antioxidant properties with applications in the food, cosmetic, and pharmaceutical industries. These phytochemicals have been associated with antiaging and anticancer activities that have potential applications on cosmetic products. This mini-review summarizes the most relevant extraction techniques used for the recovery of phenolic compounds from BSG while discussing their advantages and shortcomings and the potential applications from BSG bioactive extracts in the cosmetic industry and their reported beneficial effects. This mini-review also makes a brief comment on the role of phenolic compounds extraction in the economic feasibility of an integral BSG biorefinery.</p

Multi-product biorefinery from Arthrospira platensis biomass as feedstock for bioethanol and lactic acid production

With the aim to reach the maximum recovery of bulk and specialty bioproducts while minimizing waste generation, a multi-product biorefinery for ethanol and lactic acid production from the biomass of cyanobacterium Arthrospira platensis was investigated. Therefore, the residual biomass resulting from different pretreatments consisting of supercritical fluid extraction (SF) and microwave assisted extraction with non-polar (MN) and polar solvents (MP), previously applied on A. platensis to extract bioactive metabolites, was further valorized. In particular, it was used as a substrate for fermentation with Saccharomyces cerevisiae LPB-287 and Lactobacillus acidophilus ATCC 43121 to produce bioethanol (BE) and lactic acid (LA), respectively. The maximum concentrations achieved were 3.02 ± 0.07&nbsp;g/L of BE by the MN process at 120&nbsp;rpm 30&nbsp;°C, and 9.67 ± 0.05&nbsp;g/L of LA by the SF process at 120&nbsp;rpm 37&nbsp;°C. An economic analysis of BE and LA production was carried out to elucidate the impact of fermentation scale, fermenter costs, production titer, fermentation time and cyanobacterial biomass production cost. The results indicated that the critical variables are fermenter scale, equipment cost, and product titer; time process was analyzed but was not critical. As scale increased, costs tended to stabilize, but also more product was generated, which causes production costs per unit of product to sharply decrease. The median value of production cost was US$1.27 and US$ 0.39, for BE and LA, respectively, supporting the concept of cyanobacterium biomass being used for fermentation and subsequent extraction to obtain ethanol and lactic acid as end products from A. platensis

Environmental impact of emerging contaminants from battery waste:A mini review

The widespread consumption of electronic devices has made spent batteries an ongoing economic and ecological concern with a compound annual growth rate of up to 8% during 2018, and expected to reach between 18% and 30% to 2030. There is a lack of regulations for the proper storage and management of waste streams that enables their accumulation in open settings and the leakage of hazardous substances into the environment on landfill settings. In addition, recent trends in battery manufacture dictate the use of emerging materials like ionic liquids for electrolytes and nanostructures for cathodes to enhance their energetic properties and lifespan. The full impact of novel battery compounds on the environment is still uncertain and could cause further hindrances in recycling and containment efforts. Currently, only a handful of countries are able to recycle mass-produced lithium batteries, accounting for only 5% of the total waste of the total more than 345,000 tons in 2018. This mini review aims to integrate currently reported and emerging contaminants present on batteries, their potential environmental impact, and current strategies for their detection as evidence for policy and regulation.</p

Modern World Applications for Nano-Bio Materials:Tissue Engineering and COVID-19

Over the past years, biomaterials-based nano cues with multi-functional characteristics have been engineered with high interest. The ease in fine tunability with maintained compliance makes an array of nano-bio materials supreme candidates for the biomedical sector of the modern world. Moreover, the multi-functional dimensions of nano-bio elements also help to maintain or even improve the patients’ life quality most securely by lowering or diminishing the adverse effects of in practice therapeutic modalities. Therefore, engineering highly efficient, reliable, compatible, and recyclable biomaterials-based novel corrective cues with multipurpose applications is essential and a core demand to tackle many human health-related challenges, e.g., the current COVID-19 pandemic. Moreover, robust engineering design and properly exploited nano-bio materials deliver wide-ranging openings for experimentation in the field of interdisciplinary and multidisciplinary scientific research. In this context, herein, it is reviewed the applications and potential on tissue engineering and therapeutics of COVID-19 of several biomaterials. Following a brief introduction is a discussion of the drug delivery routes and mechanisms of biomaterials-based nano cues with suitable examples. The second half of the review focuses on the mainstream applications changing the dynamics of 21st century materials. In the end, current challenges and recommendations are given for a healthy and foreseeable future.</p

Comparative study on the valorization of Sargassum from the Mexican Caribbean coast and Gulf of California as an ingredient on healthy diets for shrimp farming

Funding: This work received the financial support of the project GCRFNGR4/1388 "Algae bloom: waste resource for aquaculture and bioenergy industry in Mexico".Sargassum biomass is a potential ingredient for aquaculture formulations due to its high nutritional value and availability, as it contains a variety of essential nutrients including proteins, carbohydrates, lipids, vitamins, antioxidants, fiber, and minerals, which are essential for aquatic growing, development and health parameters including digestibility and immune response against diseases. Therefore, in this work, five experimental diets were formulated considering 2.5 % and 5 % levels of inclusion of Sargassum spp. from the Mexican Caribbean coasts (SC), and from the Gulf of California (SG), and one reference diet as a control. The characterization of the raw material and the proximal analysis of the five diets were evaluated according to standard reference methods. A 35-day feeding trial was conducted using juvenile Litopenaeus vannamei showed a shrimp survival rate of 97 ± 6 % (p > 0.05) on SC. Excellent weight gain (WG) performance of SC and SG diets at 2.5 % of inclusion resulted in >10 % WG compared to the control. The specific activity of amylase, lipase, trypsin, and chymotrypsin showed a significant increase by including Sargassum in diets, compared with the reference diet. Incorporating Sargassum at 2.5 % in feed formulations for shrimps showed a great opportunity to use it as an ingredient and improved production yields. The digestion and absorption parameters were represented by the enzymatic activity in which the diets based on Sargassum spp. from the Mexican Caribbean coast (SC) have resulted in the best performance.Publisher PDFPeer reviewe

Agricultural waste as a sustainable source for nanoparticle synthesis and their antimicrobial properties for food preservation

Traditional agriculture from cropping to harvesting is contributing to climate change by increasing global greenhouse emissions. Circular economy approaches and biorefinery technologies based on the reuse, recycling, and remanufacturing might result in the valorization of wastes that consequently would avoid environmental pollution. Nanoparticles synthesis using bio-waste such as stems, leaves, seeds, pulp, stubble, and bagasse is considered a green approach with low energy consumption, and low-cost production. Characteristics of raw materials influence the final application of nanoparticles in edible coatings, and films. Therefore, the preparation of nanoparticles based on cellulose, pectin, metal (titanium oxide, silver, zinc oxide), or silica are considered organic, inorganic, or hybrid nanocomposites, are resulted in several benefits including shelf-life extension and broad-spectrum antimicrobial properties by its capacity to encapsulate active compounds that greatly improve food preservation. For considering agro-waste-based nanoparticles in food, challenges in homogenization and synthesis, yield, and toxicity are mainly described. Therefore, this review examines the employment of agro-industrial waste for the development of sustainable nanoparticles and their synthesis methods (top-down and bottom-up). Moreover, it discusses their incorporation and role in active edible coatings and films by highlighting their bioactive properties, mechanisms of action, and applications in food group preservation

Urine biomarkers for Alzheimer's disease: A new opportunity for wastewater-based epidemiology?

While Alzheimer's disease (AD) diagnosis, management, and care have become priorities for healthcare providers and researcher's worldwide due to rapid population aging, epidemiologic surveillance efforts are currently limited by costly, invasive diagnostic procedures, particularly in low to middle income countries (LMIC). In recent years, wastewater-based epidemiology (WBE) has emerged as a promising tool for public health assessment through detection and quantification of specific biomarkers in wastewater, but applications for non-infectious diseases such as AD remain limited. This early review seeks to summarize AD-related biomarkers and urine and other peripheral biofluids and discuss their potential integration to WBE platforms to guide the first prospective efforts in the field. Promising results have been reported in clinical settings, indicating the potential of amyloid β, tau, neural thread protein, long non-coding RNAs, oxidative stress markers and other dysregulated metabolites for AD diagnosis, but questions regarding their concentration and stability in wastewater and the correlation between clinical levels and sewage circulation must be addressed in future studies before comprehensive WBE systems can be developed.The authors would like to thank the Bioproduction Systems and MARTEC lab from Tecnologico de Monterrey, Mexico. The authors appreciate the support of Tecnologico de Monterrey for granting access to literature services and the scholarship awarded to Mónica T. Núñez-Soto (Student ID A00827926). CONACYT is thankfully acknowledged for the scholarships awarded to the authors Arnoldo Armenta-Castro (CVU: 1275527) and partially supporting this work under Sistema Nacional de Investigadores program awarded to Alberto Aguayo-Acosta (CVU: 403948), Mariel A. Oyervides-Muñoz (CVU: 422778), Juan Eduardo Sosa-Hernández (CVU: 375202) and Roberto Parra-Saldívar (CVU: 35753). Figures Created with BioRender.com.Peer reviewe

Environmental persistence, detection, and mitigation of endocrine disrupting contaminants in wastewater treatment plants – a review with a focus on tertiary treatment technologies

Endocrine disrupting chemicals are a group of contaminants that have severe effects on humans and animals when exposed, like cancer and alterations to the nervous and reproductive systems. The increasing concentrations of several endocrine disrupting chemicals in the environment are strongly related to anthropogenic activities, and as the population grows this problem becomes more relevant. Thus, wastewater is one of the main sources of endocrine disrupting chemicals, and the technologies employed during primary and secondary treatment in wastewater treatment plants cannot remove these contaminants. Due to this, researchers have tried to develop more efficient technologies for tertiary treatment of wastewater and reduce the concentration of endocrine disrupting chemicals discharged into the environment. Some of the most promising technologies include adsorption, ultrafiltration, advanced oxidation processes and biodegradation. The use of nanomaterials as adsorbents, catalysts, membranes and supports has played a key role in enhancing the efficiency of these technologies. The results showed that these technologies have great potential on the lab-scale, and even some of them have already been employed at some wastewater treatment plants. However, there are still some challenges to achieving a global implementation of these technologies, related to reducing the costs of materials and enhancing their current performance. The use of biomass/waste derived carbon materials and implementing hybrid technologies are accessible approaches for their implementation in tertiary treatment.This work is part of the project entitled “Contaminantes emergentes y prioritarios en las aguas reutilizadas en agricultura: riesgos y efectos en suelos, producción agrícola y entorno ambiental” funded by CSIC-Tecnológico de Monterrey under the i-Link + program (LINKB20030). The author “Jesús Alfredo Rodríguez-Hernández” acknowledges Consejo Nacional de Ciencia y Tecnología (CONACyT) for awarding a scholarship for a PhD in nanotechnology (CVU: 924193). CONACyT is thankfully acknowledged for partially supporting this work under the Sistema Nacional de Investigadores (SNI) program awarded to Rafael G. Araújo (CVU: 714118), Juan Eduardo Sosa-Hernández (CVU: 375202), Elda M. Melchor-Martínez (CVU: 230784), Manuel Martinez-Ruiz (CVU: 418151), Hafiz M. N. Iqbal (CVU: 735340) and Roberto Parra-Saldívar (CVU: 35753). The authors are also thankful to “Programa Iberoamericano de Ciencia y Tecnología para el Desarrollo” in the Latin American development network “Lacasas Inmovilizadas para la Degradación de Compuestos Aromáticos en Aguas Residuales” (LIDA, project 318RT0552). All listed authors are also grateful to their representative universities/institutes for providing literature facilities and the Biorender online program for the elaboration of the graphical abstract and Fig. 1–5.Peer reviewe

Recent Advances in Prodigiosin as a Bioactive Compound in Nanocomposite Applications

Bionanocomposites based on natural bioactive entities have gained importance due to their abundance; renewable and environmentally benign nature; and outstanding properties with applied perspective. Additionally, their formulation with biological molecules with antimicrobial, antioxidant, and anticancer activities has been produced nowadays. The present review details the state of the art and the importance of this pyrrolic compound produced by microorganisms, with interest towards Serratia marcescens, including production strategies at a laboratory level and scale-up to bioreactors. Promising results of its biological activity have been reported to date, and the advances and applications in bionanocomposites are the most recent strategy to potentiate and to obtain new carriers for the transport and controlled release of prodigiosin. Prodigiosin, a bioactive secondary metabolite, produced by Serratia marcescens, is an effective proapoptotic agent against bacterial and fungal strains as well as cancer cell lines. Furthermore, this molecule presents antioxidant activity, which makes it ideal for treating wounds and promoting the general improvement of the immune system. Likewise, some of the characteristics of prodigiosin, such as hydrophobicity, limit its use for medical and biotechnological applications; however, this can be overcome by using it as a component of a bionanocomposite. This review focuses on the chemistry and the structure of the bionanocomposites currently developed using biorenewable resources. Moreover, the work illuminates recent developments in pyrrole-based bionanocomposites, with special insight to its application in the medical area.This work was funded by CSIC-Tecnológico de Monterrey under i-Link+program (LINKB20030) for a project entitled “Contaminantes emergentes y prioritarios en las aguas reutilizadas en agricultura: riesgos y efectos en suelos, producción agrícola y entorno ambiental”.Peer reviewe

Revalorization of Microalgae Biomass for Synergistic Interaction and Sustainable Applications: Bioplastic Generation

Microalgae and cyanobacteria are photosynthetic microorganisms' sources of renewable biomass that can be used for bioplastic production. These microorganisms have high growth rates, and contrary to other feedstocks, such as land crops, they do not require arable land. In addition, they can be used as feedstock for bioplastic production while not competing with food sources (e.g., corn, wheat, and soy protein). In this study, we review the macromolecules from microalgae and cyanobacteria that can serve for the production of bioplastics, including starch and glycogen, polyhydroxyalkanoates (PHAs), cellulose, polylactic acid (PLA), and triacylglycerols (TAGs). In addition, we focus on the cultivation of microalgae and cyanobacteria for wastewater treatment. This approach would allow reducing nutrient supply for biomass production while treating wastewater. Thus, the combination of wastewater treatment and the production of biomass that can serve as feedstock for bioplastic production is discussed. The comprehensive information provided in this communication would expand the scope of interdisciplinary and translational research.The authors would like to acknowledge the funding provided by Tecnologico de Monterrey through the Bioprocess Research Chair (0020209I13). This work was partially supported by Consejo Nacional de Ciencia y Tecnología (CONACyT), Mexico, under the Sistema Nacional de Investigadores (SNI) program awarded to Hafiz M. N. Iqbal (CVU: 735340) and Roberto Parra-Saldivar (CVU: 35753). The Technology Scholarship to Itzel Y. López-Pacheco (CVU: 859227), Laura Isabel Rodas-Zuluaga (CVU: 943350), and Enrique Hidalgo-Vázquez (CVU: 1095127) by CONACyT is also thankfully acknowledged. Additionally, the authors would like to acknowledge Juan Eduardo Sosa-Hernández for his support. The listed author(s) also want to thank and dedicate this work to “Abraham Molina-Vazquez” who was the great support from conceptualization to compilation of this work. However, much sadly, he is not among us anymore, may his soul rest in peace.Peer reviewe