High performance composites research at NASA-Langley

Barriers to the more extensive use of advanced composites in heavily loaded structures on commercial transports are discussed from a materials viewpoint. NASA-Langley matrix development activities designed to overcome these barriers are presented. These include the synthesis of processible, tough, durable matrices, the development of resin property/composite property relationships which help guide the synthesis program, and the exploitation of new processing technology to effectively combine reinforcement filament with polymer matrices. Examples of five classes of polymers being investigated as matrix resins at NASA Langley are presented, including amorphous and semicrystalline thermoplastics, lightly crosslinked thermoplastics, semi-interpenetrating networks and toughened thermosets. Relationships between neat resin modulus, resin fracture energy, interlaminar fracture energy, composite compression strength, and post-impact compression strength are shown. Powder and slurry processing techniques are discussed

Preparing composite materials from matrices of processable aromatic polyimide thermoplastic blends

Composite materials with matrices of tough, thermoplastic aromatic polyimides are obtained by blending semi-crystalline polyimide powders with polyamic acid solutions to form slurries, which are used in turn to prepare prepregs, the consolidation of which into finished composites is characterized by excellent melt flow during processing

Assessment of alternative strategies for sludge disposal into deep ocean basins off Southern California

The general framework of engineering alternatives for regional ocean sludge disposal is well described in a report by Raksit, and will not be repeated here. The various ocean disposal alternatives are less costly than all land-disposal and incineration/pyrolysis systems studied. Even though ocean sludge disposal is currently contrary to both state and federal regulations, it is hoped that this study will advance our scientific and engineering knowledge of the behavior and effects of sludge discharge in deep water, in case the regulatory policy is reexamined in the future. With this report we hope we have demonstrated the potential and difficulties of some new modeling techniques for predicting the effects of sludge discharge in the ocean. In the future. we believe it will be possible to formulate policy of ocean sludge discharges with much better case-by-case predictions of impacts for comparison with other alternatives (such as land disposal). not only for the Los Angeles/Orange County areas, but for all coastal urban areas

Aquaculture and marketing of the Florida Bay Scallop in Crystal River, Florida

The overall goal of this study was to develop a new fishery resource product through open-water aquaculture for the west coast of Florida that would compete as a non-traditional product through market development. Specific objectives were as follows: I. To grow a minimum of 50, 000 juvenile scallops to a minimum market size of40 mm in a cage and float system in the off-shore waters of Crystal River, Florida. 2. To determine the growth rate, survival, and time to market size for the individuals in this system and area to other similar projects like Virginia. 3. To introduce local fishermen and the aquaculture students at Crystal River High School to the hatchery, nursery, and grow-out techniques. 4. To determine the economic and financial characteristics of bay scallop culture in Florida and assess the sensitivity of projected costs and earnings to changes in key technical, managerial, and market related parameters. 5. To determine the market acceptability and necessary marketing strategy for whole bay scallop product in Florida. (PDF has 99 pages.

For cost-reducing technologies, knowing markets is to change them

Journal ArticleSponsored research from a NSF Foundation/Whitaker Foundation initiative on cost-reducing technologies brought together faculty from engineering, medicine, and social sciences to link economic and policy assessments to engineering design. The technology under development is to be an inexpensive, easy-to-use monitor for self-management of metabolic diseases by patients, with specific application to phenylketonuria (PKU). While the technology remains in development, the experience, including discussions with others in the Whitaker and National Science foundations' program, raised interesting issues about economics, policy, and cost-reducing technologies

Polyimide Matrix composites: Polyimidesulfone/LARC-TPI (1:1) blend

Polyimide matrix composites were fabricated from unidirectional unsized AS-4 carbon fiber and a doped 1:1 blend of two polyimides: benzophenone dianhydride-3,3'-diamino diphenylsulfone (PISO2) and benzophenone dianhydride-3,3'-diamino benzophenone (LARC-TPI). To enhance melt flow properties, the molecular weight of the PISO2 was controlled by end-capping with phthalic anhydride and addition of 5 percent by weight p-phenylene diamine-phthalic anhydride bisamic acid dopant. Prepreg was drum-wound using a diglyme slurry comprised of the soluble polyamideacid of PISO2, the soluble bisamideacid of the dopant, and the insoluble imidized LARC-TPI powder. Melt flow studies with a rotary rheometer and parallel plate plastometer on neat resin and prepreg helped develop an optimum cure cycle. Composite mechanical properties at room and elevated temperatures, dry and moisture-saturated, were evaluated, including short beam shear strength and flexure, tensile, shear, and compression properties. Two 18 in. x 24 in. skin-stringer panels were fabricated, one of which was tested in compression to failure

Inactivation of cloned Na channels expressed in Xenopus oocytes

This study investigates the inactivation properties of Na channels expressed in Xenopus oocytes from two rat IIA Na channel cDNA clones differing by a single amino acid residue. Although the two cDNAs encode Na channels with substantially different activation properties (Auld, V. J., A. L. Goldin, D. S. Krafte, J. Marshall, J. M. Dunn, W. A. Catterall, H. A. Lester, N. Davidson, and R. J. Dunn. 1988. Neuron. 1:449-461), their inactivation properties resemble each other strongly but differ markedly from channels induced by poly(A+) rat brain RNA. Rat IIA currents inactivate more slowly, recover from inactivation more slowly, and display a steady-state voltage dependence that is shifted to more positive potentials. The macroscopic inactivation process for poly(A+) Na channels is defined by a single exponential time course; that for rat IIA channels displays two exponential components. At the single-channel level these differences in inactivation occur because rat IIA channels reopen several times during a depolarizing pulse; poly(A+) channels do not. Repetitive stimulation (greater than 1 Hz) produces a marked decrement in the rat IIA peak current and changes the waveform of the currents. When low molecular weight RNA is coinjected with rat IIA RNA, these inactivation properties are restored to those that characterize poly(A+) channels. Slow inactivation is similar for rat IIA and poly(A+) channels, however. The data suggest that activation and inactivation involve at least partially distinct regions of the channel protein

The Value of Terroir: Hedonic Estimation of Vineyard Sales Prices

We examine the value of terroir, which refers to the special characteristics of a place that impart unique qualities to the wine produced. We do this by conducting a hedonic analysis of vineyard sales in the Willamette Valley of Oregon to ascertain whether site attributes, such as slope, aspect, elevation, and soil types, or designated appellations are more important determinants of price. We find that prices are strongly determined by sub-AVA appellation designations, but not by specific site attributes. These results indicate that the concept of terroir matters economically, although the reality of terroir – as proxied for by locational attributes – is not significant