2,208 research outputs found
Market Sampling of Landings of Commercial Fish Species in the Netherlands in 2002
This report contains information on the biological sampling for the market sampling program: which species are sampled, how they were caught, when and where the samples are taken (date and position), how many fish have been measured, how many fish have been aged, etc. The report gives an overview of all the biological sampling activities in 2002 by RIVO on the landings of the commercial important species of herring, mackerel, horse mackerel, blue whiting, greater argentine, sole, plaice, turbot, brill, dab, lemon sole, cod, whiting, Norway lobster and four different species of rays from all ICES areas. This biological sampling took place on landings by both the Dutch fleet as well as foreign fleets landing in the Netherlands. In addition this report contains information on the biological samples collected during research vessel surveys and discard trips both on commercial and non-commercial species
Polar type density of states in non-unitary odd-parity superconducting states of gap with point nodes
It is shown that the density of states (DOS) proportional to the excitation
energy, the so-called polar like DOS, can arise in the odd-parity states with
the superconducting gap vanishing at points even if the spin-orbit interaction
for Cooper pairing is strong enough. Such gap stuructures are realized in the
non-unitary states, F_{1u}(1,i,0), F_{1u}(1,varepsilon,varepsilon^{2}), and
F_{2u}(1,i,0), classified by Volovik and Gorkov, Sov. Phys.-JETP Vol.61 (1985)
843. This is due to the fact that the gap vanishes in quadratic manner around
the point on the Fermi surface. It is also shown that the region of quadratic
energy dependence of DOS, in the state F_{2u}(1,varepsilon,varepsilon^{2}), is
restricted in very small energy region making it difficult to distinguish from
the polar-like DOS.Comment: 5 pages, 3 figures, submitted to J. Phys.: Condens. Matter Lette
Density of States and NMR Relaxation Rate in Anisotropic Superconductivity with Intersecting Line Nodes
We show that the density of states in an anisotropic superconductor with
intersecting line nodes in the gap function is proportional to for , where is the maximum value of
the gap function and is constant, while it is proportional to if
the line nodes do not intersect. As a result, a logarithmic correction appears
in the temperature dependence of the NMR relaxation rate and the specific heat,
which can be observed experimentally. By comparing with those for the heavy
fermion superconductors, we can obtain information about the symmetry of the
gap function.Comment: 7 pages, 4 PostScript Figures, LaTeX, to appear in J. Phys. Soc. Jp
P-055. Hardness of the zona pellucida at different stages of mouse embryonic development in vitro and in vivo as measured indirectly by a 1.48 μm diode laser
Corrosion performance of advanced structural materials in sodium.
This report gives a description of the activities in design, fabrication, construction, and assembling of a pumped sodium loop for the sodium compatibility studies on advanced structural materials. The work is the Argonne National Laboratory (ANL) portion of the effort on the work project entitled, 'Sodium Compatibility of Advanced Fast Reactor Materials,' and is a part of Advanced Materials Development within the Reactor Campaign. The objective of this project is to develop information on sodium corrosion compatibility of advanced materials being considered for sodium reactor applications. This report gives the status of the sodium pumped loop at Argonne National Laboratory, the specimen details, and the technical approach to evaluate the sodium compatibility of advanced structural alloys. This report is a deliverable from ANL in FY2010 (M2GAN10SF050302) under the work package G-AN10SF0503 'Sodium Compatibility of Advanced Fast Reactor Materials.' Two reports were issued in 2009 (Natesan and Meimei Li 2009, Natesan et al. 2009) which examined the thermodynamic and kinetic factors involved in the purity of liquid sodium coolant for sodium reactor applications as well as the design specifications for the ANL pumped loop for testing advanced structural materials. Available information was presented on solubility of several metallic and nonmetallic elements along with a discussion of the possible mechanisms for the accumulation of impurities in sodium. That report concluded that the solubility of many metals in sodium is low (<1 part per million) in the temperature range of interest in sodium reactors and such trace amounts would not impact the mechanical integrity of structural materials and components. The earlier report also analyzed the solubility and transport mechanisms of nonmetallic elements such as oxygen, nitrogen, carbon, and hydrogen in laboratory sodium loops and in reactor systems such as Experimental Breeder Reactor-II, Fast Flux Test Facility, and Clinch River Breeder Reactor. Among the nonmetallic elements discussed, oxygen is deemed controllable and its concentration in sodium can be maintained in sodium for long reactor life by using cold-trap method. It was concluded that among the cold-trap and getter-trap methods, the use of cold trap is sufficient to achieve oxygen concentration of the order of 1 part per million. Under these oxygen conditions in sodium, the corrosion performance of structural materials such as austenitic stainless steels and ferritic steels will be acceptable at a maximum core outlet sodium temperature of {approx}550 C. In the current sodium compatibility studies, the oxygen concentration in sodium will be controlled and maintained at {approx}1 ppm by controlling the cold trap temperature. The oxygen concentration in sodium in the forced convection sodium loop will be controlled and monitored by maintaining the cold trap temperature in the range of 120-150 C, which would result in oxygen concentration in the range of 1-2 ppm. Uniaxial tensile specimens are being exposed to flowing sodium and will be retrieved and analyzed for corrosion and post-exposure tensile properties. Advanced materials for sodium exposure include austenitic alloy HT-UPS and ferritic-martensitic steels modified 9Cr-1Mo and NF616. Among the nonmetallic elements in sodium, carbon was assessed to have the most influence on structural materials since carbon, as an impurity, is not amenable to control and maintenance by any of the simple purification methods. The dynamic equilibrium value for carbon in sodium systems is dependent on several factors, details of which were discussed in the earlier report. The current sodium compatibility studies will examine the role of carbon concentration in sodium on the carburization-decarburization of advanced structural materials at temperatures up to 650 C. Carbon will be added to the sodium by exposure of carbon-filled iron tubes, which over time will enable carbon to diffuse through iron and dissolve into sodium. The method enables addition of dissolved carbon (without carbon particulates) in sodium that is of interest for materials compatibility evaluation. The removal of carbon from the sodium will be accomplished by exposing carbon-gettering alloys such as refractory metals that have a high partitioning coefficient for carbon and also precipitate carbides, thereby decreasing the carbon concentration in sodium
- …