Removal of Particles from a Powdery Fouled Surface due to Impaction

Particulate fouling is defined as the unwanted deposition of particles on heat exchange surfaces. The fouling layer reduces the heat transfer rate and leads to inefficient operation. The net fouling rate is the result of the difference between the deposition rate and the removal rate of particles. One of the mechanisms that contribute to the removal of particles from powdery fouled surfaces is the collision of an incident particle with the fouled surface. In the present study, removal of particles from powdery fouled surfaces due to an incident particle impact is studied numerically and experimentally. A numerical model is developed to study the interaction of an incident particle with a bed of particles. The numerical model is based on the molecular dynamic theory of granular matter. The numerical model is tested for an incident copper particle hitting a bed of particles at different impact speeds. The numerical results are verified experimentally. An experimental setup has been built to study the removal of particles from powdery fouling layers due to an incident particle impact. It is shown that depending on the impact speed, zero, one, two or three particles are ejected from the powdery layer. By comparing the numerical results with the experimental measurements it is shown that the numerical results fit in the measured range of impact mentioned above. The numerical model will be used further to characterize the removal of particles from powdery fouling layers as function of particle size, material, incident particle impact speed and the bed of particles porosity

PARTICULATE FOULING GROWTH RATE AS INFLUENCED BY THE CHANGE IN THE FOULING LAYER STRUCTURE

Particulate fouling in biomass gasifiers is a majorproblem, which may lead to inefficient operation. As the fouling layer grows, its thermal resistance increases resulting in an increase in the surface temperature of the fouling layer. The increase in the fouling layer surface temperature can lead to sintering of the layer, which changes the layer structure from a fragile powder to a robust coherent structure. The influence of the change in the fouling layer structure on the growth rate of particulate fouling is studied experimentally. Impaction experiments were carried out to determine the velocities at which an incident particle sticks, bounces off or removes particles outof the fouling layer as a function of fouling layer structure. The sticking velocity of a particle hitting a clean tube is determined theoretically. The sticking velocity of a bronze particle hitting a bronze plate is 0.006 m/s, for a powdery layer is 0.3 m/s and for a sintered layer is 0.04 m/s. The change in the heat exchanger surface from solid to powdery increases the sticking velocity, which consequently speeds up the fouling process. The further change in the heat exchanger surface from powdery to sintered decreases the sticking velocity, which reduces back the fouling process. The change in the fouling layer structures affects the sticking velocity as well as the removal velocity of incident particles, which consequently affect the fouling process

Parameterization of a reactive force field using a Monte Carlo algorithm

Abstract Parameterization of a Molecular Dynamics force field is essential in realistically modelling the physico-chemical processes involved in a molecular system. This step is often challenging when the equations involved in describing the force field are complicated as well as when the parameters are mostly empirical. ReaxFF is one such reactive force field which uses hundreds of parameters to describe the interactions between atoms. The optimization of the parameters in ReaxFF is done such that the the properties predicted by ReaxFF matches with a set of quantum chemical or experimental data. Usually, the optimization of the parameters is done by an inefficient single parameter parabolic-search algorithm. In this study, we use a robust Metropolis Monte-Carlo algorithm with Simulated Annealing (MMC-SA) to search for the optimum parameters for the ReaxFF force field in a high-dimensional parameter space. The optimization is done against a set of quantum chemical data for M gSO 4 hydrates. The optimized force field reproduced the chemical structures, the Equations of State and the water binding curves of M gSO 4 hydrates. The transferability test of the ReaxFF force field shows the extend of transferability for a particular molecular system. This study points out that the ReaxFF force field is not indefinitely transferable

Liquid metals as a divertor plasma facing material explored using the Pilot-PSI and Magnum-PSI linear devices

Abstract For DEMO and beyond liquid metal plasma facing components are considered due to their resilience to erosion through flowed replacement, potential for cooling beyond conduction and inherent immunity to many of the issues of neutron loading compared to solid materials. The development curve of liquid metals is behind that of e.g. tungsten however and tokamak-based research is currently somewhat limited in scope. Therefore investigation in linear plasma devices can provide faster progress under controlled and well-diagnosed conditions in assessing many of the issues surrounding the use of liquid metals. The linear plasma devices Magnum-PSI and Pilot-PSI are capable of producing DEMO relevant plasma fluxes which well replicate expected divertor conditions, and the exploration of physics issues for tin (Sn) and lithium (Li) such as vapour-shielding, erosion under high particle flux loading and overall power handing are reviewed here. A deeper understanding of erosion and deposition through this work indicates that stannane formation may play an important role in enhancing Sn erosion, while on the other hand the strong hydrogen isotope affinity reduces the evaporation rate and sputtering yields for Li. In combination with the strong re-deposition rates which have been observed under this type of high density plasma this implies an increase in the operational temperature range, implying a power handling range of 20-25 MW m -2 for Sn and up to 12.5 MW m -2 for Li could be achieved. Vapour shielding may be expected to act as a self-protection mechanism in reducing the heat load to the substrate for off-normal events in the case of Sn, but may potentially be a continual mode of operation for Li.</p

A One Health overview, facilitating advances in comparative medicine and translational research.

Table of contentsA1 One health advances and successes in comparative medicine and translational researchCheryl StroudA2 Dendritic cell-targeted gorilla adenoviral vector for cancer vaccination for canine melanomaIgor Dmitriev, Elena Kashentseva, Jeffrey N. Bryan, David T. CurielA3 Viroimmunotherapy for malignant melanoma in the companion dog modelJeffrey N. Bryan, David Curiel, Igor Dmitriev, Elena Kashentseva, Hans Rindt, Carol Reinero, Carolyn J. HenryA4 Of mice and men (and dogs!): development of a commercially licensed xenogeneic DNA vaccine for companion animals with malignant melanomaPhilip J. BergmanA5 Successful immunotherapy with a recombinant HER2-expressing Listeria monocytogenes in dogs with spontaneous osteosarcoma paves the way for advances in pediatric osteosarcomaNicola J. Mason, Josephine S. Gnanandarajah, Julie B. Engiles, Falon Gray, Danielle Laughlin, Anita Gaurnier-Hausser, Anu Wallecha, Margie Huebner, Yvonne PatersonA6 Human clinical development of ADXS-HER2Daniel O'ConnorA7 Leveraging use of data for both human and veterinary benefitLaura S. TremlA8 Biologic replacement of the knee: innovations and early clinical resultsJames P. StannardA9 Mizzou BioJoint Center: a translational success storyJames L. CookA10 University and industry translational partnership: from the lab to commercializationMarc JacobsA11 Beyond docking: an evolutionarily guided OneHealth approach to drug discoveryGerald J. Wyckoff, Lee Likins, Ubadah Sabbagh, Andrew SkaffA12 Challenges and opportunities for data applications in animal health: from precision medicine to precision husbandryAmado S. GuloyA13 A cloud-based programmable platform for healthHarlen D. HaysA14 Comparative oncology: One Health in actionAmy K. LeBlancA15 Companion animal diseases bridge the translational gap for human neurodegenerative diseaseJoan R. Coates, Martin L. Katz, Leslie A. Lyons, Gayle C. Johnson, Gary S. Johnson, Dennis P. O'BrienA16 Duchenne muscular dystrophy gene therapyDongsheng DuanA17 Polycystic kidney disease: cellular mechanisms to emerging therapiesJames P. CalvetA18 The domestic cat as a large animal model for polycystic kidney diseaseLeslie A. Lyons, Barbara GandolfiA19 The support of basic and clinical research by the Polycystic Kidney Disease FoundationDavid A. BaronA20 Using naturally occurring large animal models of human disease to enable clinical translation: treatment of arthritis using autologous stromal vascular fraction in dogsMark L. WeissA21 Regulatory requirements regarding clinical use of human cells, tissues, and tissue-based productsDebra A. WebsterA22 Regenerative medicine approaches to Type 1 diabetes treatmentFrancis N. KaranuA23 The zoobiquity of canine diabetes mellitus, man's best friend is a friend indeed-islet transplantationEdward J. RobbA24 One Medicine: a development model for cellular therapy of diabetesRobert J. Harman

LiMeS-Lab:An Integrated Laboratory for the Development of Liquid–Metal Shield Technologies for Fusion Reactors

The liquid metal shield laboratory (LiMeS-Lab) will provide the infrastructure to develop, test, and compare liquid metal divertor designs for future fusion reactors. The main research topics of LiMeS-lab will be liquid metal interactions with the substrate material of the divertor, the continuous circulation and capillary refilling of the liquid metal during intense plasma heat loading and the retention of plasma particles in the liquid metal. To facilitate the research, four new devices are in development at the Dutch Institute for Fundamental Energy Research and the Eindhoven University of Technology: LiMeS-AM: a custom metal 3D printer based on powder bed fusion; LiMeS-Wetting, a plasma device to study the wetting of liquid metals on various substrates with different surface treatments; LiMeS-PSI, a linear plasma generator specifically adapted to operate continuous liquid metal loops. Special diagnostic protection will also be implemented to perform measurements in long duration shots without being affected by the liquid metal vapor; LiMeS-TDS, a thermal desorption spectroscopy system to characterize deuterium retention in a metal vapor environment. Each of these devices has specific challenges due to the presence and deposition of metal vapors that need to be addressed in order to function. In this paper, an overview of LiMeS-Lab will be given and the conceptual designs of the last three devices will be presented.</p

Depiction of pneumothoraces in a large animal model using x-ray dark-field radiography

The aim of this study was to assess the diagnostic value of x-ray dark-field radiography to detect pneumothoraces in a pig model. Eight pigs were imaged with an experimental grating-based large-animal dark-field scanner before and after induction of a unilateral pneumothorax. Image contrast-to-noise ratios between lung tissue and the air-filled pleural cavity were quantified for transmission and dark-field radiograms. The projected area in the object plane of the inflated lung was measured in dark-field images to quantify the collapse of lung parenchyma due to a pneumothorax. Means and standard deviations for lung sizes and signal intensities from dark-field and transmission images were tested for statistical significance using Student’s two-tailed t-test for paired samples. The contrast-to-noise ratio between the air-filled pleural space of lateral pneumothoraces and lung tissue was significantly higher in the dark-field (3.65 ± 0.9) than in the transmission images (1.13 ± 1.1; p = 0.002). In case of dorsally located pneumothoraces, a significant decrease (−20.5%; p > 0.0001) in the projected area of inflated lung parenchyma was found after a pneumothorax was induced. Therefore, the detection of pneumothoraces in x-ray dark-field radiography was facilitated compared to transmission imaging in a large animal model