13,145 research outputs found
A rubidium clock for GPS
The design objectives and approach; the more important design features; the signal parameters and error budget; and early test results in the development of a second-source rubidium frequency standard for use in the GPS navigation satellites are discussed. Tests of a breadboard version of the RFS show that the measured time-domain stability is within the goal specification. The results are uncorrected for the conribution of the reference and are probably limited by the reference stability in the medium term region. The Rb reference is bbetter in the medium term region, but the Cs reference is etter at 10,000 seconds and longer, probably because of the barometric sensitivity of the rubidium reference unit
The direct numerical simulations of the turbulent wakes of axisymmetric bodies
Results of direct numerical simulations of turbulence are compared with both laboratory data and self-similarity theory for the case of the turbulent wakes of towed, axisymmetric bodies. In general, the agreement of the simulation results with both the laboratory data and the self-similarity theory is good, although the comparisons are hampered by inadequate procedures for initializing the numerical simulations
A study of early stopping, ensembling, and patchworking for cascade correlation neural networks
The constructive topology of the cascade correlation algorithm makes it a popular choice for many researchers wishing to utilize neural networks. However, for multimodal problems, the mean squared error of the approximation increases significantly as the number of modes increases. The components of this error will comprise both bias and variance and we provide formulae for estimating these values from mean squared errors alone. We achieve a near threefold reduction in the overall error by using early stopping and ensembling. Also described is a new subdivision technique that we call patchworking. Patchworking, when used in combination with early stopping and ensembling, can achieve an order of magnitude improvement in the error. Also presented is an approach for validating the quality of a neural network’s training, without the explicit use of a testing dataset
Power law burst and inter-burst interval distributions in the solar wind: turbulence or dissipative SOC ?
We calculate for the first time the probability density functions (PDFs) P of
burst energy e, duration T and inter-burst interval tau for a known turbulent
system in nature. Bursts in the earth-sun component of the Poynting flux at 1
AU in the solar wind were measured using the MFI and SWE experiments on the
NASA WIND spacecraft. We find P(e) and P(T) to be power laws, consistent with
self-organised criticality (SOC). We find also a power law form for P(tau) that
distinguishes this turbulent cascade from the exponential P(tau) of ideal SOC,
but not from some other SOC-like sandpile models. We discuss the implications
for the relation between SOC and turbulence.Comment: 3 pages, 1 figure. Submitted to PRL on 25th February 2000. Revised
version re-submitted on 9th May 2000. Second revised version submitted Phys.
Rev. E on 26th June, 200
High voltage solid-state relay
Hybrid microelectronics relay has characteristics significantly superior to conventional solid state relays. Relay provides 2500 Vdc input to output isolation and operates from high threshold logic signal to switch load of 400 Vdc at 2 mA. Technology should be of interest to manufacturers of discrete components
A simplex-like search method for bi-objective optimization
We describe a new algorithm for bi-objective optimization, similar to the Nelder Mead simplex
algorithm, widely used for single objective optimization. For diferentiable bi-objective functions on
a continuous search space, internal Pareto optima occur where the two gradient vectors point in
opposite directions. So such optima may be located by minimizing the cosine of the angle between
these vectors. This requires a complex rather than a simplex, so we term the technique the \cosine
seeking complex". An extra beneft of this approach is that a successful search identifes the direction
of the effcient curve of Pareto points, expediting further searches. Results are presented for some
standard test functions. The method presented is quite complicated and space considerations here
preclude complete details. We hope to publish a fuller description in another place
Recommended from our members
The Influence of Heat Input Ratio on Electrical Power Output of a Dual-Core Travelling-Wave Thermoacoustic Engine
This paper presents an analytical and experimental investigation of an electricity generator that employs a two-stage looped tube travellin -wave thermoacoustic prime-mover to deliver acoustic power from heat energy, a loudspeaker to extract electricity from sound energy and a tuning stub to compensate the changes in the acoustic field within the engine to enable close to travelling wave operation at the loudspeaker. Furthermore, the paper explains how to enhance the output power utilizing different heat input ratios through the engine cores. A well-known thermoacoustic design tool called Delta EC is used to simulate the wave propagation through the different parts of the system. The electrical power predicted from the low-cost prototype was 24.4 W acoustic power which confirms the potential for developing low-cost thermoacoustic electricity generator for heat recov ery from low-grade heat sources. The electrical power can be increased to 31.3 W using different heating power percentages through the two units. The verified experimental data shows good agreement with DeltaEC results
A rubidium clock for SEEK-TALK
The development of a tactical rubidium frequency standard (TRFS) for the SEEK-TALK program is discussed. This effort, which is entering the prototype stage, is directed toward the establishment of a production capability for miniature rubidium clocks of medium stability capable of fast warmup and extreme ruggedness for military avionics applications. The overall unit consists of an ultraminiature physics package and four plug-in circuit boards inside a 2 1/2-inch square by 4-inch box. This size is achieved without the extensive use of hybrid microcircuitry, yet is believed to be the smallest atomic frequency standard yet developed
Alaskan soil carbon stocks: spatial variability and dependence on environmental factors
The direction and magnitude of soil organic carbon (SOC) changes in response to climate change depend on the spatial and vertical distributions of SOC. We estimated spatially resolved SOC stocks from surface to C horizon, distinguishing active-layer and permafrost-layer stocks, based on geospatial analysis of 472 soil profiles and spatially referenced environmental variables for Alaska. Total Alaska state-wide SOC stock was estimated to be 77 Pg, with 61% in the active-layer, 27% in permafrost, and 12% in non-permafrost soils. Prediction accuracy was highest for the active-layer as demonstrated by highest ratio of performance to deviation (1.5). Large spatial variability was predicted, with whole-profile, active-layer, and permafrost-layer stocks ranging from 1–296 kg C m<sup>−2</sup>, 2–166 kg m<sup>−2</sup>, and 0–232 kg m<sup>−2</sup>, respectively. Temperature and soil wetness were found to be primary controllers of whole-profile, active-layer, and permafrost-layer SOC stocks. Secondary controllers, in order of importance, were found to be land cover type, topographic attributes, and bedrock geology. The observed importance of soil wetness rather than precipitation on SOC stocks implies that the poor representation of high-latitude soil wetness in Earth system models may lead to large uncertainty in predicted SOC stocks under future climate change scenarios. Under strict caveats described in the text and assuming temperature changes from the A1B Intergovernmental Panel on Climate Change emissions scenario, our geospatial model indicates that the equilibrium average 2100 Alaska active-layer depth could deepen by 11 cm, resulting in a thawing of 13 Pg C currently in permafrost. The equilibrium SOC loss associated with this warming would be highest under continuous permafrost (31%), followed by discontinuous (28%), isolated (24.3%), and sporadic (23.6%) permafrost areas. Our high-resolution mapping of soil carbon stock reveals the potential vulnerability of high-latitude soil carbon and can be used as a basis for future studies of anthropogenic and climatic perturbations
Direct numerical simulation of reacting flows
The objectives of this work are: (1) to extend the technique of direct numerical simulations to turbulent, chemically reacting flows, (2) to test the validity of the method by comparing computational results with laboratory data, and (3) to use the simulations to gain a better understanding of the effects of turbulence on chemical reactions. The effects of both the large scale structure and the smaller scale turbulence on the overall reaction rates are addressed. The relationship between infinite reaction rate and finite reaction rate chemistry is compared with some of the results of calculations with existing theories and laboratory data. The direct numerical simulation method involves the numerical solution of the detailed evolution of the complex turbulent velocity and concentration fields. Using very efficient numerical methods (e.g., pseudospectral methods), the fully nonlinear (possibly low pass filtered) equations of motion are solved and no closure assumptions or turbulence models are used. Statistical data are obtained by performing spatial, temporal, and/or ensemble averages over the computed flow fields
- …