Mass Transfer of Anthocyanins during Extraction from Pre-Fermentative Grape Solids under Simulated Fermentation Conditions: Effect of Convective Conditions

The colour of red wine is largely determined by the concentration of anthocyanins that are extracted from grape skins during fermentation. Because colour is a key parameter in determining the overall quality of the finished product, understanding the effect of processing variables on anthocyanin extraction is critical for producing a red wine with the desired sensorial characteristics. In this study, the effect of convective conditions (natural and forced) on the mass transfer properties of malvidin-3-glucoside (M3G) from pre-fermentative grape solids was explored at various liquid phase conditions representing stages of fermentation. A mathematical model that separates solid and liquid phase mass transfer parameters was applied to experimental extraction curves, and in all cases, provided a coefficient of determination exceeding 0.97. Calculated mass transfer coefficients indicated that under forced convective conditions, the extraction process was controlled by internal diffusion whereas under natural convection, both internal diffusion and liquid-phase mass transfer were relevant in determining the overall extraction rate. Predictive simulations of M3G extraction during active fermentation were accomplished by incorporating the current results with a previously developed fermentation model, providing insight into the effect of a dynamic liquid phase on anthocyanin extraction

Modelling of Catechin Extraction from Red Grape Solids under Conditions That Simulate Red Wine Fermentation

Digital control systems are well established in many industries and could find application in the wine sector. Of critical importance to red wine quality, the efficient and targeted extraction of polyphenols from red grape solids during alcoholic fermentation could be a focus for automation. Smart technologies such as model predictive control (MPC) or fuzzy logic appear ideal for application in a complex process such as wine polyphenol extraction, but require mathematical models that accurately describe the system. The aim of this study was to derive and validate a model describing the extraction of catechin (a representative polyphenol) from red grape solids under simulated fermentation conditions. The impact of ethanol, fermentable sugar, and temperature on extraction rate was determined, with factor conditions chosen to emulate those present in industry practice. A first-order approach was used to generate an extraction model based on mass conservation that incorporated temperature and sugar dependency. Coefficients of determination (R2) for all test scenarios exceeded 0.94, indicating a good fit to the experimental data. Sensitivity analysis for the extraction rate and internal cross-validation showed the model to be robust, with a small standard error in cross-validation (SECV) of 0.11 and a high residual predictive deviation (RPD) of 17.68. The model that was developed is well suited to digital technologies where low computational overheads are desirable, and industrial application scenarios are presented for future implementation of the work

Modelling the Mass Transfer Process of Malvidin-3-Glucoside during Simulated Extraction from Fresh Grape Solids under Wine-Like Conditions

Extraction of grape components is a key consideration for red winemaking. The impact of changing process variables on mass transfer properties of anthocyanins from fresh pre-fermentative red grape solids under forced convective conditions was explored using the dominant red grape anthocyanin, malvidin-3-glucoside (M3G) as a model solute. A two level full factorial design was implemented to investigate effects of temperature, sugar and ethanol on mass transfer properties. Factor levels were chosen to simulate conditions found at various points during the maceration and fermentation steps of the red winemaking process. A rigorous mathematical model was developed and applied to experimental extraction curves, allowing the separation of mass transport properties in liquid and solid phases in a wine-like system, for the first time. In all cases, the coefficient of determination exceeded 0.92, indicating good agreement between experimental and mathematically-solved M3G concentrations. For the conditions studied, internal mass transfer was found to limit M3G extraction and changes to the liquid phase composition and temperature influence the distribution constant. Surface response models of mass transfer parameters were developed to allow future simulations of fermentation scenarios aimed at maximising the extraction potential of M3G

Potato Protein Fining of Phenolic Compounds in Red Wine: A Study of the Kinetics and the Impact of Wine Matrix Components and Physical Factors

Producing wines within an acceptable range of astringency is important for quality and consumer acceptance. Astringency can be modified by fining during the winemaking process and the use of vegetable proteins (especially potato proteins) as fining agents has gained increasing interest due to consumers’ requirements. The research presented was the first to investigate the effect of a potato protein dose on the kinetics of tannin and phenolic removal compared to gelatin for two unfined Cabernet Sauvignon wines. To further understand the results, the influence of the wine matrix and fining parameters (including pH, ethanol concentration, sugar concentration, temperature, and agitation) were tested according to a fractional 25-1 factorial design on one of the Cabernet Sauvignon wines using potato proteins. The results from the factorial design indicate that potato protein fining was significantly influenced by wine pH, ethanol concentration, fining temperature as well as an interaction (pH × ethanol) but not by sugar content or agitation. Insights into the steps required for the optimisation of fining were gained from the study, revealing that potato protein fining efficiency could be increased by treating wines at higher temperatures (20 °C, rather than the conventional 10–15 °C), and at both a lower pH and/or alcohol concentration

Chemical and Sensory Impacts of Accentuated Cut Edges (ACE) Grape Must Polyphenol Extraction Technique on Shiraz Wines

Accentuated Cut Edges (ACE) is a recently developed grape must extraction technique, which mechanically breaks grape skins into small fragments but maintains seed integrity. This study was the first to elucidate the effect of ACE on Shiraz wine’s basic chemical composition, colour, phenolic compounds, polysaccharides and sensory profiles. A further aim was to investigate any potential influence provided by ACE on the pre-fermentation water addition to must. ACE did not visually affect Shiraz wine colour, but significantly enhanced the concentration of tannin and total phenolics. Wine polysaccharide concentration was mainly increased in response to the maceration time rather than the ACE technique. ACE appeared to increase the earthy/dusty flavour, possibly due to the different precursors released by the greater skin breakage. The pre-fermentation addition of the water diluted the wine aromas, flavours and astringency profiles. However, combining the ACE technique with water addition enhanced the wine textural quality by increasing the intensities of the crucial astringent wine quality sub-qualities, adhesive and graininess. Furthermore, insights into the chemical factors influencing the astringency sensations were provided in this study. This research indicates that wine producers may use ACE with pre-fermentation water dilution to reduce the wine alcohol level but maintain important textural components

Degradation of white wine haze proteins by Aspergillopepsin I and II during juice flash pasteurization

Bentonite is commonly used to remove grape proteins responsible for haze formation in white wines. Proteases potentially represent an alternative to bentonite, but so far none has shown satisfactory activity under winemaking conditions. A promising candidate is AGP, a mixture of Aspergillopepsins I and II.; a food grade, well characterized and inexpensive protease, active at wine pH and at high temperatures (60-80 °C). AGP was added to two clarified grape juices with and without heat treatments (75 °C, 1 min) prior to fermentation. AGP showed some activity at fermentation temperatures (≈20% total protein reduction compared to control wine) and excellent activity when combined with juice heating (≈90% total protein reduction). The more heat stable grape proteins, i.e. those not contributing to wine hazing, were not affected by the treatments and therefore accounted for the remaining 10% of protein still in solution after the treatments. The main physicochemical parameters and sensorial characteristics of wines produced with AGP were not different from controls.9 page(s