Field-free molecular orientation by THz laser pulses at high temperature

We investigate to which extend a THz laser pulse can be used to produce field-free molecular orientation at high temperature. We consider laser pulses that can be implemented with the state of the art technology and we show that the efficiency of the control scheme crucially depends on the parameters of the molecule. We analyze the temperature effects on molecular dynamics and we demonstrate that, for some molecules, a noticeable orientation can be achieved at high temperature.Comment: 13 pages, 7 figure

Fresnel concentrating collector

An advanced point focusing solar technology demonstrated potential for near term commercialization as a renewable energy technology. The design features combine to produce a highly efficient, low cost, safe, adaptable, durable system which is simple to manufacture, install and maintain

Measured acoustic properties of variable and low density bulk absorbers

Experimental data were taken to determine the acoustic absorbing properties of uniform low density and layered variable density samples using a bulk absober with a perforated plate facing to hold the material in place. In the layered variable density case, the bulk absorber was packed such that the lowest density layer began at the surface of the sample and progressed to higher density layers deeper inside. The samples were placed in a rectangular duct and measurements were taken using the two microphone method. The data were used to calculate specific acoustic impedances and normal incidence absorption coefficients. Results showed that for uniform density samples the absorption coefficient at low frequencies decreased with increasing density and resonances occurred in the absorption coefficient curve at lower densities. These results were confirmed by a model for uniform density bulk absorbers. Results from layered variable density samples showed that low frequency absorption was the highest when the lowest density possible was packed in the first layer near the exposed surface. The layers of increasing density within the sample had the effect of damping the resonances

Strong Coupling Expansions for Antiferromagnetic Heisenberg S=1/2 Ladders

The properties of antiferromagnetic Heisenberg $S=\frac{1}{2}$ ladders with 2, 3, and 4 chains are expanded in the ratio of the intra- and interchain coupling constants. A simple mapping procedure is introduced to relate the 4 and 2-chain ladders which holds down to moderate values of the expansion parameters. A second order calculation of the spin gap to the lowest triplet excitation in the 2- and 4-chain ladders is found to be quite accurate even at the isotropic point where the couplings are equal. Similar expansions and mapping procedures are presented for the 3-chain ladders which are in the same universality class as single chains.Comment: 10 physical pages, uuencoded compressed PostScript file including 12 figures, ETH-TH/942

Spin Gaps in Coupled t-J Ladders

Spin gaps in coupled $t$-$J$ ladders are investigated by exact diagonalization of small clusters up to 4$\times$8 sites. At half-filling, the numerical results for the triplet excitation spectrum are in very good agreement with a second order perturbation expansion in term of small inter-ladder and intra-ladder exchange couplings between rungs ($J/J^\prime$$<$$0.25$). The band of local triplet excitations moving coherently along the ladder (with momenta close to $\pi$) is split by the inter-ladder coupling. For intermediate couplings finite size scaling is used to estimate the spin gap. In the isotropic infinite 4-chain system (two coupled ladders) we find a spin gap of $0.245 J$, roughly half of the single ladder spin gap. When the system is hole doped, bonding and anti-bonding bound pairs of holes can propagate coherently along the chains and the spin gap remains finite.Comment: 11 pages, 5 figures, uuencoded form of postscript files of figures and text, LPQTH-94/

Handbook for Learning-centred evaluation of Computer-facilitated learning projects in higher education

This handbook supports a project funded by the Australian Government Committee for University Teaching and Staff Development (CUTSD). The amended project title is “Staff Development in Evaluation of Technology-based Teaching Development Projects: An Action Inquiry Approach”. The project is hosted by Murdoch University on behalf of the Australasian Society for Computers in Learning in Tertiary Education (ASCILITE), as a consortium of 11 universities. The rationale of the project is to guide a group of university staff through the evaluation of a Computer-facilitated Learning (CFL1) project by a process of action inquiry and mentoring, supported by the practical and theoretical material contained in this handbook

Modem design for a MOBILESAT terminal

The implementation is described of a programmable digital signal processor based system, designed for use as a test bed in the development of a digital modem, codec, and channel simulator. Code was written to configure the system as a 5600 bps or 6600 bps QPSK modem. The test bed is currently being used in an experiment to evaluate the performance of digital speech over shadowed channels in the Australian mobile satellite (MOBILESAT) project

WHAT IS THE VALUE OF BT CORN?

A common perception is that the value of Bt corn arises from two components-Bt corn increases expected profit and reduces profit variability. This perception encourages farmers and the policy makers to add a risk benefit to estimates of the value of Bt corn to account for the variability reduction. However, a conceptual model generates a useful decomposition of the value of Bt corn and a condition determining the impact of Bt corn on profit variability. An empirical model finds that Bt corn increases profit variability and thus decreases the value of Bt corn by 10-25% depending on risk preferences.Crop Production/Industries,

On numerically accurate finite element

A general criterion for testing a mesh with topologically similar repeat units is given, and the analysis shows that only a few conventional element types and arrangements are, or can be made suitable for computations in the fully plastic range. Further, a new variational principle, which can easily and simply be incorporated into an existing finite element program, is presented. This allows accurate computations to be made even for element designs that would not normally be suitable. Numerical results are given for three plane strain problems, namely pure bending of a beam, a thick-walled tube under pressure, and a deep double edge cracked tensile specimen. The effects of various element designs and of the new variational procedure are illustrated. Elastic-plastic computation at finite strain are discussed