3,827 research outputs found
Economic–financial evaluation and multicriteria analysis of innovative public transport guided systems: an application to “Linea della Musica” in Rome
Trams and innovative public transport systems in historical city centres, are often not considered by public authorities, due to their strong visual impact, (e.g. in proximity of artistic-cultural places), and high project costs. The decision-makers guess that the high initial investment could not be compensated for in subsequent years. For this reason, it is very important to evaluate all the innovative solutions, not only economically, but considering all externalities, positive and negative, in a multi-criteria analysis taking into account public opinions and passengers’ behaviours essential for assessing revenues, and also return of image. On this basis, the results may be impressive: the positive economic impact may be highlighted, and they can have a result better than traditional systems. The subject of the analysis is the innovative system “Tramwave” of Ansaldo STS that combines an investment cost imperceptibly higher than the traditional tram, and a zero visual impact due to the absence of the overhead line due to the uptake of electrical energy from the ground. This system, applied to “Linea della Musica”, a planned tramway line in Rome, through a detailed financial balance of costs and revenues, shows a positive Net Present Value 30–40 years after the initial investment. The current crisis, both culturally and economically, can cause two types of reactions: an indiscriminate cutting of essential public services, or a positive crackdown, that puts ideas in motion, awakens the pride of the common good, and realizes innovations for saving money. The proposed analysis will try to encourage the second reaction
Probing the presence of planets in transition discs' cavities via warps: the case of TW Hya
We are entering the era in which observations of protoplanetary discs
properties can indirectly probe the presence of massive planets or low mass
stellar companions interacting with the disc. In particular, the detection of
warped discs can provide important clues to the properties of the star-disc
system. In this paper we show how observations of warped discs can be used to
infer the dynamical properties of the systems. We concentrate on circumbinary
discs, where the mass of the secondary can be planetary. First, we provide some
simple relations that link the amplitude of the warp in the linear regime to
the parameters of the system. Secondly, we apply our method to the case of TW
Hya, a transition disc for which a warp has been proposed based on
spectroscopic observations. Assuming values for the disc and stellar parameters
from observations, we conclude that, in order for a warp induced by a planetary
companion to be detectable, the planet mass should be large () and the disc should be viscous (). We also apply our model to LkCa 15 and T Cha, where a substellar
companion has been detected within the central cavity of the transition discs.Comment: 12 pages, 4 figures, 2 tables. Accepted for publication in MNRA
Assessment of energy and emissions saving solutions in urban rail-based transport systems
Global warming and climate change are indisputable theories. Since the Industrial
Revolution, the mean temperature of the planet has increased by 1°C. Now, temperatures
are approaching a higher stage of +1.5°C and the attention is on both CO2 emissions and
energy consumption. Transportation is a major component of the environmental impact,
accounting for approximately 30% of air pollution and energy consumption. Due to the
rapid urbanization in the EU, with an estimated 74.3% of the population living in cities,
forecasted to rise to 80% by 2050, urban mobility is dramatically increasing its relevance.
Therefore, a reduction in energy consumption and pollutant emissions is a crucial factor to
consider in developing urban transportation and particularly rail-based systems, able to
provide energy saving transport services by improving urban environment. Several methods
and techniques are under development to improve the energy performance of Light Rail
Transport (LRT), which spread from different typologies of power supply to improving
energy efficiency. The purpose of this paper is to start from the last developments and
innovative energy sources for LRT systems. The focus is on two parts: a) trams running on
Hydrogen in parallel with on board batteries with energy saving control techniques, b)
potential renewable energy sources to meet power demand. The comparison is with
traditional power sources and equipment (e.g. Catenary-based). The methods, based on
selected indicators, are under development and test by calculations and simulations with
reference to the case study of the new tramlines in the city of Brescia (Italy)
Complex railway systems: capacity and utilisation of interconnected networks
Introduction Worldwide the transport sector faces several issues related to the rising of traffic demand such as congestion, energy consumption, noise, pollution, safety, etc. Trying to stem the problem, the European Commission is encouraging a modal shift towards railway, considered as one of the key factors for the development of a more sustainable European transport system. The coveted increase in railway share of transport demand for the next decades and the attempt to open up the rail market (for freight, international and recently also local services) strengthen the attention to capacity usage of the system. This contribution proposes a synthetic methodology for the capacity and utilisation analysis of complex interconnected rail networks; the procedure has a dual scope since it allows both a theoretically robust examination of suburban rail systems and a solid approach to be applied, with few additional and consistent assumptions, for feasibility or strategic analysis of wide networks (by efficiently exploiting the use of Big Data and/or available Open Databases). Method In particular the approach proposes a schematization of typical elements of a rail network (stations and line segments) to be applied in case of lack of more detailed data; in the authors’ opinion the strength points of the presented procedure stem from the flexibility of the applied synthetic methods and from the joint analysis of nodes and lines. The article, after building a quasiautomatic model to carry out several analyses by changing the border conditions or assumptions, even presents some general abacuses showing the variability of capacity/utilization of the network’s elements in function of basic parameters. Results This has helped in both the presented case studies: one focuses on a detailed analysis of the Naples’ suburban node, while the other tries to broaden the horizon by examining the whole European rail network with a more specific zoom on the Belgium area. The first application shows how the procedure can be applied in case of availability of fine-grained data and for metropolitan/regional analysis, allowing a precise detection of possible bottlenecks in the system and the individuation of possible interventions to relieve the high usage rate of these elements. The second application represents an on-going attempt to provide a broad analysis of capacity and related parameters for the entire European railway system. It explores the potentiality of the approach and the possible exploitation of different ‘Open and Big Data’ sources, but the outcomes underline the necessity to rely on proper and adequate information; the accuracy of the results significantly depend on the design and precision of the input database. Conclusion In conclusion, the proposed methodology aims to evaluate capacity and utilisation rates of rail systems at different geographical scales and according to data availability; the outcomes might provide valuable information to allow efficient exploitation and deployment of railway infrastructure, better supporting policy (e.g. investment prioritization, rail infrastructure access charges) and helping to minimize costs for users.The presented case studies show that the method allows indicative evaluations on the use of the system and comparative analysis between different elementary components, providing a first identification of ‘weak’ links or nodes for which,
then, specific and detailed analyses should be carried out, taking into account more in depth their actual configuration, the technical characteristics and the real composition of the traffic (i.e. other elements influencing the rail capacity, such as: the adopted operating systems, the station traffic/route control & safety system, the elastic release of routes, the overlap of block sections, etc.)
The sapheno femoral junction involvement in the treatment of varicose veins disease
Sapheno femoral junction (SFJ) incompetence has been considered the most important cause of chronic venous insufficiency in a high percent of cases since the beginning of history varicose veins treatment. As a consequence SFJ dissection, ligation and section has been practiced all along the last century, generally associated to great saphenous vein stripping, with the porpoise of stopping the effect of hydrostatic pressure considered the origin of varicose veins. Recurrence prevalence at the site of SFJ, even in correctly performed dissection suggests that this attitude may not be the ideal one. Moreover, with the introduction of catheter-based systems of endovenous heating of the great saphenous vein with radiofrequency or endovenous laser ablation, it was shown that venous ablation could be achieved without high ligation of the SFJ. Also foam sclerotherapy demonstrated good results, even if less effective, always leaving the SFJ untouched. Following this trend several methods have been suggested that spare the SFJ, so that this site have lost its strategical importance. In this review history of the SFJ involvement in the varicose vein strategy is analyzed with particular attention to the new generation methods, technology assisted, launched on the market
What Does 'Non-Inferior to' Really Mean?
As clinicians, we are frequently faced with papers stating that something is 'non-inferior' to something else. By definition, a non-inferiority trial aims to demonstrate that the test product is not worse than the comparator by more than a small pre-specified amount. This amount is known as the non-inferiority margin, or delta. Clinicians must know who has chosen the margin, and why. Only when the advantages of the trial treatment clearly overcome the amount of 'worsening' which is implicit in the concept of non-inferiority and delta can we recommend this new 'non-inferior' (or, rather, 'just a little bit worse') treatment to our patients
Varicose veins in women with Pelvic Congestion Syndrome: the hypothesis of the hormonal pathogenesis
Pelvic veins incompetence may cause varicose veins formation in the lower extremity due to leak points of the pelvic circulation. This observation is particularly frequent in recurrence cases especially in multi parity. The cause of pelvic vein dilatation is still not clear. Traditional mechanism for varicose veins formation referred to leg varices cannot be transferred to pelvic circulation where a strong efficient pumping mechanism and a high hydrostatic column is missing. An alternative explanation is possible if hormonal factors are considered to contribute to vasodilatation (estrogen is a potent vasodilator), and pelvic veins are naturally exposed to high doses of ovarian hormones. Pelvic veins dilatation/hypertension , rich in estrogens, may be directed through leak points to leg veins where estrogens effect of vasodilation is maintained. Then, at every Valsalva like action, some blood rich in estrogens passes in the leg network giving rise, among others, to perineal veins dilatation, recurrence after groin dissection for SFJ high ligation, intermittent leg pain/discomfort. Estrogens sampling studies could confirm this hypothesis and guide alternative treatments
Modeling an offshore container terminal: the Venice case study
In order to reduce marine transportation times and related costs, as well as the environmental impacts, an alternative multimodal route to the current Suez-Gibraltar-North Sea corridor for the containers shipped from Far and Middle East was identified as potentially very effective. A key operational problem to achieve this result is the capacity and the effectiveness of the terminals within the concerned new logistic chain. In this framework, the Venice Port Authority is developing a project aimed to improve relevantly the potential of its container terminals to al-low loading/unloading of containers to and from the Central Europe. The project includes a new offshore terminal for mooring huge ships (up to 18.000 TEU) in the Adriatic Sea and a link operated by barges with an onshore terminal in Venice to overcome the constraints for the navigation of the containers ships in the Venetian lagoon. This innovative operational scheme requires a deep functional analysis to ensure the full capacity
operation, assess the reachable performances and correspondingly dimensioning the required equipment (cranes, barges, quays, etc.). For this purpose, the authors developed a specific discrete-events simulation model. The paper includes the presentation of the model and the results of its application to Venice case study, by identifying the benefits achievable with this approach and the potential wider application fields
How to make modal shift from road to rail possible in the European transport market, as aspired to in the EU Transport White Paper 2011
The total demand for freight transport in Europe has increased significantly in recent decades, but most of it has been handled by road transport. To fulfil the modal shift targets set in the EU White Paper 2011, it will be necessary to double rail’s market share from today’s 18 %, by 2050.
Translating this into reality means rail will have to handle 3 to 4 times the cargo volume it does today. With this in mind, the paper develops a vision of an efficient rail freight system in 2050.
Methodology To achieve the above objective, the research applies literature survey and group discussion methodology and applying a system approach. Keeping on board the EU Transport White Paper 2011 modal shift targets, as well as future freight demand and customer requirements, the current research attempts to answer the following three critical questions:
-How can rail offer the quality of service that will attract
customers and fulfil the targets?
- How can rail offer its customers a price that is competitive
with road?
- How can rail offer the capacity to meet the increased demand
from modal shift
Intermodal terminals simulation for operation management
A freight terminal is a key node in a transportation network and the transit time of containers through
this terminal represents one of the most relevant bottleneck in logistic chains.
The system performance reduction and the corresponding increase of transit time is often due to the
increase of the freight flow without a corresponding increase of stacking and handling capacity.
For this purpose it was decided to approach the problem by a discrete event simulation model, in order
to reproduce the activities carried out inside an intermodal terminal, to calculate the total transit time and
to identify the bottlenecks.
The transit time of a cargo unit in a terminal is the summation of times required for the development of
each phase of the process (waiting time + operational time).
Therefore, the first step was the identification of the main activities and the analysis of waiting and
operational phases, in order to quantify the times of each phase.
For modelling the software Planimate® was used. Planimate® allows the simulation of a process as a
set of discrete events, in series or in parallel, through the use of hierarchical networks.
In order to optimise handling operations on containers, different scenarios were simulated with various
fleets of trailers and front cranes to investigate the corresponding variations of performance indicators.
For the application of the model an Italian case study was chosen: the container terminal inside the
harbour of Livorno (Darsena Toscana Terminal)
- …