9,629 research outputs found

    Predictions and measurements of isothermal flowfields in axisymmetric combustor geometries

    Get PDF
    Numerical predictions, flow visualization experiments and time-mean velocity measurements were obtained for six basic nonreacting flowfields (with inlet swirl vane angles of 0 (swirler removed), 45 and 70 degrees and sidewall expansion angles of 90 and 45 degrees) in an idealized axisymmetric combustor geometry. A flowfield prediction computer program was developed which solves appropriate finite difference equations including a conventional two equation k-epsilon eddy viscosity turbulence model. The wall functions employed were derived from previous swirling flow measurements, and the stairstep approximation was employed to represent the sloping wall at the inlet to the test chamber. Recirculation region boundaries have been sketched from the entire flow visualization photograph collection. Tufts, smoke, and neutrally buoyant helium filled soap bubbles were employed as flow tracers. A five hole pitot probe was utilized to measure the axial, radial, and swirl time mean velocity components

    A Scanning laser-velocimeter technique for measuring two-dimensional wake-vortex velocity distributions

    Get PDF
    A rapid scanning two dimensional laser velocimeter (LV) has been used to measure simultaneously the vortex vertical and axial velocity distributions in the Langley Vortex Research Facility. This system utilized a two dimensional Bragg cell for removing flow direction ambiguity by translating the optical frequency for each velocity component, which was separated by band-pass filters. A rotational scan mechanism provided an incremental rapid scan to compensate for the large displacement of the vortex with time. The data were processed with a digital counter and an on-line minicomputer. Vaporized kerosene (0.5 micron to 5 micron particle sizes) was used for flow visualization and LV scattering centers. The overall measured mean-velocity uncertainity is less than 2 percent. These measurements were obtained from ensemble averaging of individual realizations

    Pyrotechnic shock at the orbiter/external tank forward attachment

    Get PDF
    During the initial certification test of the forward structural attachment of the space shuttle orbiter to the external tank, pyrotechnic shock from actuation of the separation device resulted in structural failure of the thermal protection tiles surrounding the attachment. Because of the high shock associated with the separation bolt, the development of alternative low shock separation designs was initiated. Two concepts that incorporate a 5.08 centimeter frangible nut as the release device were developed and tested

    Regional differences in store-operated Ca2+ entry in the epithelium of the intact human lens

    Get PDF
    An elevated level of Ca2+ is an important factor in cataract, yet precisely how Ca2+ enters the lens is unknown. Lens epithelial cells contain a range of G-protein–coupled receptors and receptor tyrosine kinases that induce increases in intracellular Ca2+. Receptor-associated Ca2+ influx is, therefore, likely to be an important route for Ca2+ influx to the lens. The authors investigated stimulated and passive Ca2+ influx in in situ human lens epithelium. Ca2+ changes in equatorial (E) and central anterior (CA) epithelial cells were monitored with the use of a Ca2+ indicator (Fluo4) and confocal microscopy. Gene expression was monitored by RT-PCR and immunoblotting. Adenosine triphosphate (ATP) induced Ca2+ responses that were smaller in CA than E. Ca2+ store depletion, using ATP (100 µM) or thapsigargin (1 µM), revealed greater relative store capacity and Ca2+ influx in E. Ca2+ influx was blocked by La3+ (0.5 µM) in both regions. Unstimulated Ca2+ influx was greater in E than CA. Greater expression of Orai1 and STIM1 was detected in E than in CA. Greater Ca2+ store capacity and Ca2+ influx in E compared with CA reflects underlying differences in proliferation and differentiation between the regions. The relatively small resting Ca2+ influx in CA epithelium suggests that store-operated Ca2+ entry (SOCE) is the main route of Ca2+ influx in these cells. Greater resting influx and SOCE in E cells suggests that these are a major route for Ca2+ influx into the lens. Increased expression of Orai1 and STIM1 in E could account for the differences in Ca2+ entry. Receptor activation will modulate Ca2+ influx, and inappropriate activity may contribute to cortical cataract

    The use of actuated flexible plates for adaptive shock control bumps

    Get PDF
    corecore