On the concentration and size distribution of sub-micron aerosol in the Galápagos Islands

During the CHARLEX campaign in the Galápagos Islands, a Scanning Particle Mobility Sizer was deployed on San Cristobal Island in July-August 2011 to carry out size-resolved measurements of the concentration of submicron aerosols. To our knowledge these are the first measurements of aerosol concentrations in this unique environment. The particles with marine origin displayed a tri-modal number size distribution with peak diameters of 0.016 μm, 0.050 μm and 0.174 μm and a cloud-processed intermodal minimum at 0.093 μm. The mean total aerosol number concentration for the marine contribution was 470 ± 160 cm. A low particle concentration of 70 ± 50 cm for the nucleation size range was measured, but no evidence of new particle production in the atmospheric marine boundary layer (MBL) was observed. The concentration of the Aitken size mode was found to be related to aerosol entrainment from the free troposphere off the coast of Chile followed by transport within the MBL to the Galápagos Islands. Cloud processing may activate the particles in the Aitken size range, growing through 'in-cloud' sulphate production and increasing the particle concentration in the accumulation size range. The 0.093 μm cloud processed minima suggests that the critical supersaturation at which the particle is activated to a cloud droplet is in the 0.14-0.21% range. The daytime marine particle background concentration was influenced by human activity around the sampling site, as well as by new particle formation triggered by biogenic emissions from the vegetation cover of the island's semiarid lowlands. Effective CCN formation may play a role in the formation and properties of the stratus clouds, which permanently cover the top of the windward side of the islands and establish one of their characteristic climatic bands.Peer Reviewe

Spectroscopic Observations of Convective Patterns in the Atmospheres of Metal-Poor Stars

Convective line asymmetries in the optical spectrum of two metal-poor stars, Gmb1830 and HD140283, are compared to those observed for solar metallicity stars. The line bisectors of the most metal-poor star, the subgiant HD140283, show a significantly larger velocity span that the expectations for a solar-metallicity star of the same spectral type and luminosity class. The enhanced line asymmetries are interpreted as the signature of the lower metal content, and therefore opacity, in the convective photospheric patterns. These findings point out the importance of three-dimensional convective velocity fields in the interpretation of the observed line asymmetries in metal-poor stars, and in particular, urge for caution when deriving isotopic ratios from observed line shapes and shifts using one-dimensional model atmospheres. The mean line bisector of the photospheric atomic lines is compared with those measured for the strong Mg I b1 and b2 features. The upper part of the bisectors are similar, and assuming they overlap, the bottom end of the stronger lines, which are formed higher in the atmosphere, goes much further to the red. This is in agreement with the expected decreasing of the convective blue-shifts in upper atmospheric layers, and compatible with the high velocity redshifts observed in the chromosphere, transition region, and corona of late-type stars.Comment: 27 pages, LaTeX; 10 Figures (14 PostScript files); to be published in The Astrophysical Journa

Benchmarking techno-economic performance of greenhouses with different technology levels in a hot humid climate

Greenhouse agriculture is expected to play a critical role in sustainable crop production in the coming decades, opening new markets in climate zones that have been traditionally unproductive for agriculture. Extreme hot and humid conditions, prevalent in rapidly growing economies including the Arabian Peninsula, present unique design and operational challenges to effective greenhouse climate control. These challenges are often poorly understood by local operators and inadequately researched in the literature. This study addresses this knowledge gap by presenting, for the first time, a comprehensive set of benchmarks for water and energy usage, CO2 emissions (CO2e) contribution, and economic performance for low-, mid-, and high-tech greenhouse designs in such climates. Utilising a practical and adaptable model-based framework, the analysis reveals the high-tech design generated the best results for economic return, achieving a 4.9-year payback period with superior water efficiency compared to 5.8 years for low-tech and 7.0 years for mid-tech; however, the high-tech design used significantly more energy to operate its mechanical cooling system, corresponding with higher CO2e per unit area (8.3 and 4.0 times higher than the low- and mid-tech, respectively). These benchmarks provide new insights for greenhouse operators, researchers, and other stakeholders, facilitating the development of effective greenhouse design and operational strategies tailored to meet the challenges of hot and humid climates

Benchmarking techno-economic performance of greenhouses with different technology levels in a hot humid climate

Greenhouse agriculture is expected to play a critical role in sustainable crop production in the coming decades, opening new markets in climate zones that have been traditionally unproductive for agriculture. Extreme hot and humid conditions, prevalent in rapidly growing economies including the Arabian Peninsula, present unique design and operational challenges to effective greenhouse climate control. These challenges are often poorly understood by local operators and inadequately researched in the literature. This study addresses this knowledge gap by presenting, for the first time, a comprehensive set of benchmarks for water and energy usage, CO2 emissions (CO2e) contribution, and economic performance for low-, mid-, and high-tech greenhouse designs in such climates. Utilising a practical and adaptable model-based framework, the analysis reveals the high-tech design generated the best results for economic return, achieving a 4.9-year payback period with superior water efficiency compared to 5.8 years for low-tech and 7.0 years for mid-tech; however, the high-tech design used significantly more energy to operate its mechanical cooling system, corresponding with higher CO2e per unit area (8.3 and 4.0 times higher than the low- and mid-tech, respectively). These benchmarks provide new insights for greenhouse operators, researchers, and other stakeholders, facilitating the development of effective greenhouse design and operational strategies tailored to meet the challenges of hot and humid climates

A lean six sigma framework for continuous and incremental improvement in the oil and gas sector

This article aims to explore synergies between Lean Production (LP) and Six Sigma principles in order to propose a Lean Six Sigma (LSS) framework for continuous and incremental improvement in the oil and gas sector. The Three-Dimensional LSS Framework seeks to provide various combinations about the integration between LP principles, DMAIC cycle and PDCA cycle to support operations management needs. Design/methodology/approach - The research method is composed of two main steps: (i) diagnostic of current problems and proposition of a conceptual framework that qualitatively integrates synergistic aspects of LP and Six Sigma; and (ii) analysis of the application of the construct through semi-structured interviews with leaders from oil and gas companies to assess and validate the proposed framework. Findings - As a result, a conceptual framework of LSS is developed contemplating the integration of LP and Six Sigma and providing a systemic and holistic approach to problemsolving through continuous and incremental improvement in the oil and gas sector. Originality/value - This research is different from previous studies because it integrates LP principles, DMAIC and PDCA cycles into a unique framework that fulfils a specific need of oil and gas sector. It presents a customized LSS framework that guides wastes and costs reduction, while enhances quality and reduces process variability to elevate efficiency in operations management of this sector. The paper type is an original research that present new and original scientific findings.N/

Sneddon syndrome a case report and literature review

Sneddon’s syndrome (SS) is characterized by livedo racemosa (LR) or reticularis and recurrent ischemic strokes. At the skin and brain level a non-inflammatory thrombotic vasculopathy is observed. Almost 80% of cases are women around 40 years old. The most accepted etiological proposal is an autoimmune and inflammatory mechanism versus the presence of thrombophilia. Neurological manifestations occur in 3 phases: prodromal symptoms (headache, dizziness, and vertigo), recurrent strokes, and early-onset dementia. Livedo racemosa has been reported to precede strokes by more than 10 years. Treatment is mainly based on secondary prophylaxis preventing a stroke with antiplatelet and antithrombotic agents. The neuropsychiatric prognosis is relatively poor with deficits in concentration, attention, visual perception, and visuospatial skills

Taxonomic variations in the gut microbiome of gout patients with and without tophi might have a functional impact on urate metabolism

Objective: To evaluate the taxonomic composition of the gut microbiome in gout patients with and without tophi formation, and predict bacterial functions that might have an impact on urate metabolism. Methods: Hypervariable V3–V4 regions of the bacterial 16S rRNA gene from fecal samples of gout patients with and without tophi (n=33 and n=25, respectively) were sequenced and compared to fecal samples from 53 healthy controls. We explored predictive functional profles using bioinformatics in order to identify diferences in taxonomy and metabolic pathways. Results: We identifed a microbiome characterized by the lowest richness and a higher abundance of Phascolarctobacterium, Bacteroides, Akkermansia, and Ruminococcus_gnavus_group genera in patients with gout without tophi when compared to controls. The Proteobacteria phylum and the Escherichia-Shigella genus were more abundant in patients with tophaceous gout than in controls. Fold change analysis detected nine genera enriched in healthy controls compared to gout groups (Bifdobacterium, Butyricicoccus, Oscillobacter, Ruminococcaceae_UCG_010, Lachnospiraceae_ND2007_group, Haemophilus, Ruminococcus_1, Clostridium_sensu_stricto_1, and Ruminococcaceae_ UGC_013). We found that the core microbiota of both gout groups shared Bacteroides caccae, Bacteroides stercoris ATCC 43183, and Bacteroides coprocola DSM 17136. These bacteria might perform functions linked to one-carbon metabo‑ lism, nucleotide binding, amino acid biosynthesis, and purine biosynthesis. Finally, we observed diferences in key bacterial enzymes involved in urate synthesis, degradation, and elimination. Conclusion: Our fndings revealed that taxonomic variations in the gut microbiome of gout patients with and with‑ out tophi might have a functional impact on urate metabolism. Keywords: Gout, Gut microbiota, Uric acid metabolis

A universal vaccine candidate against Plasmodium vivax malaria confers protective immunity against the three PvCSP alleles

Malaria is a highly prevalent parasitic disease in regions with tropical and subtropical climates worldwide. Among the species of Plasmodium causing human malaria, P. vivax is the second most prevalent and the most geographically widespread species. A major target of a pre-erythrocytic vaccine is the P. vivax circumsporozoite protein (PvCSP). In previous studies, we fused two recombinant proteins representing three allelic variants of PvCSP (VK210, VK247 and P. vivax-like) to the mumps virus nucleocapsid protein to enhance immune responses against PvCSP. The objective of the present study was to evaluate the protective efficacy of these recombinants in mice challenged with transgenic P. berghei parasites expressing PvCSP allelic variants. Formulations containing Poly (I:C) or Montanide ISA720 as adjuvants elicited high and long-lasting IgG antibody titers specific to each PvCSP allelic variant. Immunized mice were challenged with two existing chimeric P. berghei parasite lines expressing PvCSP-VK210 and PvCSP-VK247. We also developed a novel chimeric line expressing the third allelic variant, PvCSP-P. vivax-like, as a new murine immunization-challenge model. Our formulations conferred partial protection (significant delay in the time to reach 1% parasitemia) against challenge with the three chimeric parasites. Our results provide insights into the development of a vaccine targeting multiple strains of P. vivax.Host-parasite interactio