25 research outputs found
Recommended from our members
Instrumentation for a radon research house
A highly automated monitoring and control system for studying radon and radon-daughter behavior in residences has been designed and built. The system has been installed in a research house, a test space contained in a two-story wood-framed building, which allows us to conduct controlled studies of (1) pollutant transport within and between rooms, (2) the dynamics of radon daughter behavior, and (3) techniques for controlling radon and radon daughters. The system's instrumentation is capable of measuring air-exchange rate, four-point radon concentration, individual radon daughter concentrations, indoor temerature and humidity, and outdoor weather parameters (temperature, humidity, modules, wind speed, and wind direction). It is also equipped with modules that control the injection of radon and tracer gas into the test space, the operation of the forced-air furnace, the mechanical ventilation system, and the mixing fans located in each room. A microcomputer controls the experiments and records the data on magnetic tape and on a printing terminal. The data on tape is transferred to a larger computer system for reduction and analysis. In this paper we describe the essential design and function of the instrumentation system, as a whole, singling out those components that measure ventilation rate, radon concentration, and radon daughter concentrations
Recommended from our members
Indoor Radon and Its Decay Products: Concentrations, Causes, and Control Strategies
This report is an introduction to the behavior of radon 222 and its decay products in indoor air. This includes review of basic characteristics of radon and its decay products and of features of the indoor environment itself, all of which factors affect behavior in indoor air. The experimental and theoretical evidence on behavior of radon and its decay products is examined, providing a basis for understanding the influence of geological, structural, and meteorological factors on indoor concentrations, as well as the effectiveness of control techniques. We go on to examine three important issues concerning indoor radon. We thus include (1) an appraisal of the concentration distribution in homes, (2) an examination of the utility and limitations of popular monitoring techniques and protocols, and (3) an assessment of the key elements of strategies for controlling radon levels in homes
Recommended from our members
Indoor radon and decay products: Concentrations, causes, and control strategies
This report is another in the on going technical report series that addresses various aspects of the DOE Radon Research Program. It provides an overview of what is known about the behavior of radon and its decay products in the indoor environment and examines the manner in which several important classes of factors -- structural, geological, and meteorological -- affect indoor radon concentrations. Information on US indoor radon concentrations, currently available monitoring methods and novel radon control strategies are also explored. 238 refs., 22 figs., 9 tabs
Recommended from our members
Sorption of organic gases in a furnished room
We present experimental data and semi-empirical models describing the sorption of organic gases in a simulated indoor residential environment. Two replicate experiments were conducted with 20 volatile organic compounds (VOCs) in a 50-m{sup 3} room finished with painted wallboard, carpet and cushion, draperies and furnishings. The VOCs span a wide volatility range and include ten Hazardous Air Pollutants. VOCs were introduced to the static chamber as a pulse and their gas-phase concentrations were measured during a net adsorption period and a subsequent net desorption period. Three sorption models were fit to the measured concentrations for each compound to determine the simplest formulation needed to adequately describe the observed behavior. Sorption parameter values were determined by fitting the models to adsorption period data then checked by comparing measured and predicted behavior during desorption. The adequacy of each model was evaluated using a goodness of fit parameter calculated for each period. Results indicate that sorption usually does not greatly affect indoor concentrations of methyl-tert-butyl ether, 2-butanone, isoprene and benzene. In contrast, sorption appears to be a relevant indoor process for many of the VOCs studied, including C{sub 8}-C{sub 10} aromatic hydrocarbons (HC), terpenes, and pyridine. These compounds sorbed at rates close to typical residential air change rates and exhibited substantial sorptive partitioning at equilibrium. Polycyclic aromatic HCs, aromatic alcohols, ethenylpyridine and nicotine initially adsorbed to surfaces at rates of 1.5 to >6 h{sup -1} and partitioned 95 to >99% in the sorbed phase at equilibrium
Recommended from our members
Impacts of a Sub-Slab Aggregate Layer and a Sub-Aggregate Membrane on Radon Entry Rate: A Numerical Study
A subslab aggregate layer can increase the radon entry rate into a building by up to a factor of 5. We use a previously tested numerical technique to investigate and confirm this phenomenon. Then we demonstrate that a sub-aggregate membrane has the potential to significantly reduce the increase in radon entry rate due to the aggregate layer, even when a gap exists between the perimeter of the membrane and the footer. Such membranes greatly reduce diffusion of radon from the soil into the aggregate and are impermeable to flow. Radon entry through the basement floor slab is limited to radon entry through the holes in the membrane. In addition, a sub-aggregate membrane is predicted to improve the performance of active sub-slab ventilation systems and makes passive systems more promising
Recommended from our members
The transformation of outdoor ammonium nitrate aerosols in the indoor environment
Recommended from our members
Indoor, outdoor and regional profiles of PM2.5 sulfate, nitrateand carbon
Fine particle concentrations were measured simultaneously at three locations: a regional monitoring site in Fresno, California, a backyard of an unoccupied residence in Clovis, California located 6 km northeast of the regional site; and indoors at the same residence. Measurements included 10-min determination of PM{sub 2.5} nitrate, sulfate and carbon using an automated collection and vaporization system, and black carbon measured by light attenuation through a filter deposit. Specific outdoor PM{sub 2.5} constituents were compared to assess the appropriateness of using regional data to model indoor concentrations from outdoor sources. The outdoor data show that, in general, the regional results provide a good representation of the concentrations seen at the building exterior. The indoor concentrations showed considerable attenuation as well as a broadening and time-lag for the concentration peaks. The concentration reduction was the largest for PM{sub 2.5} nitrate, which appears to undergo phase changes in addition to indoor deposition and penetration losses
Recommended from our members
Modeling radon entry into houses with basements: Model description and verification
We model radon entry into basements using a previously developed three-dimensional steady-state finite difference model that has been modified in the following ways: first, cylindrical coordinates are used to take advantage of the symmetry of the problem in the horizontal plant; second, the configuration of the basement has been made more realistic by incorporating the concrete footer; third, a quadratic relationship between the pressure and flow in the L-shaped gap between slab, footer, and wall has been employed; fourth, the natural convection of the soil gas which follows from the heating of the basement in winter has been taken into account. The temperature field in the soil is determined from the equation of energy conservation, using the basement, surface, and deep-soil temperatures as boundary conditions. The pressure field is determined from Darcy's law and the equation of mass conservation (continuity), assuming that there is no flow across any boundary except the soil surface (atmospheric pressure) and the opening in the basement shell (fixed pressure). After the pressure and temperatures field have been obtained the velocity field is found from Darcy's law. Finally, the radon concentration field is found from the equation of mass-transport. The convective radon entry rate through the opening or openings is then calculated. In this paper we describe the modified model, compare the predicted radon entry rates with and without the consideration of thermal convection, and compare the predicted rates with determined from data from 7 houses in the Spokane River valley of Washington and Idaho. Although the predicted rate is much lower than the mean of the rates determined from measurements, errors in the measurement of soil permeability and variations in the permeability of the area immediately under the basement slab, which has a significant influence on the pressure field, can account for the range of entry rates inferred from the data. 25 refs., 8 figs
Recommended from our members
Modeling Radon Entry into House with Basements: Model Description and Verification
Recommended from our members