457 research outputs found
Experimental temperature profiles in timber elements subjected to fire conditions
Safe use of wood for modern structural applications requires a precise definition of the in-depth evolution of temperatures and degradation rates (mass loss rates). A series of experiments have been carried out with the main aim of developing a dependable procedure to obtain well characterized temperature distributions and mass loss rates in wood specimens subjected to radiant energy within magnitudes typical of fires. The measurements have been then compared against the results of a simplified numerical model of the pyrolysis process. The results show a good agreement between the model and the experiments for the initial heating stages. However, the agreement becomes poorer at longer exposure times and increased depths from the exposed surface
A simplified analytical model for radiation dominated ignition of solid fuels exposed to multiple non-steady heat fluxes
Heat fluxes from fires are strongly time-dependent. Historically, the thermal ignition theory in its classical form has neglected this time dependency until recent years, where theories have been developed to include time-varying incident heat fluxes. This article proposes a simplified general model formulation for the heating of solid fuels exposed to four different heat flux behaviors, considering the penetration of radiation into the medium. The incident heat flux cases developed where: Constant, Linear, Exponential and Polynomial, which represent different situations related to structural and wildland fires. The analytical models consider a spatially averaged medium temperature and exact and approximate solutions are presented, based on the critical ignition temperature criterion, which are valid for solids of any optical thickness. The results were validated by comparison with various models presented in the literature, where the model granted in this work was capable to adjust to all of them, especially when high heat fluxes are involved. Therefore, the proposed model acquires a significant engineering utility since it provides a single model to be used as a general and versatile tool to predict the ignition delay time in a manageable way for solid fuels exposed to different fire conditions
MBE grown preferentially oriented CdMgO alloy on m- and c-plane sapphire substrates
Unlike other II-VI semiconductors, CdO-based transparent oxide has great
potential application for the fabrication of many optoelectronic devices. In
this work, we study the growth of CdxMg1-xO alloys on m- and on c-plane
sapphire substrates in Cd-rich to Mg-rich conditions using the plasma-assisted
molecular beam epitaxy method. A structural and morphological study of CdMgO
random alloys was carried out using X-ray diffraction and Atomic Force
Microscope (AFM) techniques whereas composition analysis was done by
Energy-dispersive X-ray (EDX) spectroscopy method. The optical properties of
thin films were investigated by UV-Vis spectroscopy at room temperature. X-ray
analysis confirmed the presence of cubic rock salt structure with CdMgO
crystallographic orientation on c-plane sapphire and CdMgO preferential
orientation on m-plane sapphire. The surface roughness was measured by the AFM.
From the absorption curve, the optical bandgaps were determined using Tauc
relation and it was found that the bandgap of films is influenced by the
incorporation of Mg2+ ions into the CdO lattice. Bowing parameter was
calculated both for samples on m- and c- sapphires.Comment: 19 pages, 11 figure
Fermi level dependence of magnetism and magnetotransport in the magnetic topological insulators BiTe and BiSbTe containing self-organized MnBiTe septuple layers
The magnetic coupling mechanisms underlying ferromagnetism and
magnetotransport phenomena in magnetically doped topological insulators have
been a central issue to gain controlled access to the magneto-topological
phenomena such as quantum anomalous Hall effect and topological axion
insulating state. Here, we focus on the role of bulk carriers in magnetism of
the family of magnetic topological insulators, in which the host material is
either BiTe or BiSbTe, containing Mn self-organized in
MnBiTe septuple layers. We tune the Fermi level using the electron
irradiation technique and study how magnetic properties vary only through the
change in carrier density. Ferromagnetic resonance spectroscopy excludes bulk
magnetism based on a carrier-mediated process. Furthermore, the
magnetotransport measurements show that the anomalous Hall effect is dominated
by the intrinsic and dissipationless Berry-phase driven mechanism, with the
Hall resistivity enhanced near the bottom/top of the conduction/valence band,
due to the Berry curvature which is concentrated near the avoided band
crossings. These results demonstrate that the anomalous Hall effect can be
effectively managed, maximized, or turned off, by adjusting the Fermi level.Comment: 11 pages, 7 figure
Effect of rapid thermal annealing on short period {CdO/ZnO}m SLs grown on m-Al2O3
Here, we report on the characterization of {CdO/ZnO}m superlattice structures
(SLs) grown by plasma assisted molecular beam epitaxy. The properties of
as-grown and annealed SLs deposited on m-oriented sapphire were investigated by
secondary ion mass spectrometry (SIMS) and scanning electron microscopy (SEM)
in cathodoluminescence (CL) and energy dispersive X-ray modes. The deformation
of the crystallographic structure of SLs was observed after rapid thermal
annealing at 900{\deg}C in oxygen flow due to migration and segregation of Cd
atoms. SIMS measurements revealed that the distributions of cadmium in the
annealed samples depend on the thicknesses of the CdO and ZnO sublayers in the
as grown superlattice structures. Depth-resolved CL measurements showed that
shifting of the near band edge emission peaks is closely related to the Cd
profiles measured with SIMS.Comment: 14 pages, 6 figure
A human MAP kinase interactome.
Mitogen-activated protein kinase (MAPK) pathways form the backbone of signal transduction in the mammalian cell. Here we applied a systematic experimental and computational approach to map 2,269 interactions between human MAPK-related proteins and other cellular machinery and to assemble these data into functional modules. Multiple lines of evidence including conservation with yeast supported a core network of 641 interactions. Using small interfering RNA knockdowns, we observed that approximately one-third of MAPK-interacting proteins modulated MAPK-mediated signaling. We uncovered the Na-H exchanger NHE1 as a potential MAPK scaffold, found links between HSP90 chaperones and MAPK pathways and identified MUC12 as the human analog to the yeast signaling mucin Msb2. This study makes available a large resource of MAPK interactions and clone libraries, and it illustrates a methodology for probing signaling networks based on functional refinement of experimentally derived protein-interaction maps
- …