Water-soluble polyphosphonate-based bottlebrush copolymers via aqueous ring-opening metathesis polymerization

Ring-opening metathesis polymerization (ROMP) is a versatile method for synthesizing complex macromolecules from various functional monomers. In this work, we report the synthesis of water-soluble and degradable bottlebrush polymers, based on polyphosphoesters (PPEs) via ROMP. First, PPE-macromonomers were synthesized via organocatalytic anionic ring-opening polymerization of 2-ethyl-2-oxo-1,3,2-dioxaphospholane using N-(hydroxyethyl)-cis-5-norbornene-exo-2,3-dicarboximide as the initiator and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as the catalyst. The resulting norbornene-based macromonomers had degrees of polymerization (DPn) ranging from 25 to 243 and narrow molar mass dispersity (Đ ≤ 1.10). Subsequently, these macromonomers were used in ROMP with the Grubbs 3rd-generation bispyridyl complex (Ru-G3) to produce a library of well-defined bottlebrush polymers. The ROMP was carried out either in dioxane or in aqueous conditions, resulting in well-defined and water-soluble bottlebrush PPEs. Furthermore, a two-step protocol was employed to synthesize double hydrophilic diblock bottlebrush copolymers via ROMP in water at neutral pH-values. This general protocol enabled the direct combination of PPEs with ROMP to synthesize well-defined bottlebrush polymers and block copolymers in water. Degradation of the PPE side chains was proven resulting in low molar mass degradation products only. The biocompatible and biodegradable nature of PPEs makes this pathway promising for designing novel biomedical drug carriers or viscosity modifiers, as well as many other potential applications.</p

Step-growth titanium-catalysed dehydropolymerisation of amine-boranes

Titanium-catalysed dehydropolymerisation of primary amine–boranes was found to proceed via a step-growth rather than a chain-growth mechanism.</p

Boron–nitrogen main chain analogues of polystyrene:poly(<i>B</i>-aryl)aminoboranes via catalytic dehydrocoupling

High molecular weight B-arylated polyaminoboranes are obtained via catalytic dehydropolymerisation of B-aryl amine–boranes and represent the first inorganic polystyrene analogues with a B–N main chain.</p

Polyphosphonate-Based Macromolecular RAFT-CTA Enables the Synthesis of Well-Defined Block Copolymers Using Vinyl Monomers

Reversible addition–fragmentation chain transfer (RAFT) polymerization has become a straightforward approach to block copolymers using a wide variety of functional vinyl monomers. Polyphosphoester (PPE) macroinitiators from ring-opening polymerization (ROP) of their corresponding cyclic phosphoesters have been previously prepared for atom transfer radical polymerization; however, to date, these biodegradable macroinitiators for RAFT polymerization have not been reported. Herein, a macromolecular RAFT-chain transfer agent (CTA) based on poly(ethyl ethylene phosphonate) was prepared by the organocatalytic ROP of 2-ethyl-2-oxo-1,3,2-dioxaphospholane using 2-cyano-5-hydroxypentan-2-yl dodecyl trithiocarbonate as the initiator and 1,8-diazabycyclo[5.4.0]undec-7-ene as the catalyst. Precise macro-CTAs of degrees of polymerization (DPn) from 34 to 70 with Đ ≤ 1.10 were prepared and used in the dioxane solution RAFT polymerization of acrylamide, acrylates, methacrylates, and 2-vinylpyridine to yield a library of well-defined block copolymers. Additionally, the PPE-based macro RAFT-CTA was used as a nonionic surfactant in a typical aqueous emulsion polymerization of styrene to produce well-defined nanoparticles with the hydrophilic PPEs on their surface as the stabilizing agent. This general protocol allowed the combination of polyphosphoesters with RAFT polymerization

Al(III)/K(I) Heterodinuclear Polymerization Catalysts Showing Fast Rates and High Selectivity for Polyester Polyols

Low molar mass, hydroxyl end-capped polymers, often termed “polyols,” are widely used to make polyurethanes, resins, and coatings and as surfactants in liquid formulations. Epoxide/anhydride ring-opening copolymerization (ROCOP) is a controlled polymerization route to make them, and its viability depends upon catalyst selection. In the catalysis, the polyester polyol molar masses and end-groups are controlled by adding specific but excess quantities of diols (vs catalyst), known as the chain transfer agent (CTA), to the polymerizations, but many of the best current catalysts are inhibited or even deactivated by alcohols. Herein, a series of air-stable Al(III)/K(I) heterodinuclear polymerization catalysts show rates and selectivity at the upper end of the field. They also show remarkable increases in activity, with good selectivity and control, as quantities of diol are increased from 10–400 equiv. The reactions are accelerated by alcohols, and simultaneously, their use allows for the production of hydroxy telechelic poly/oligoesters (400 Mn (g mol–1) Đ < 1.19). For example, cyclohexene oxide (CHO)/phthalic anhydride (PA) ROCOP, using the best Al(III)/K(I) catalyst with 200 equiv of diol, shows a turnover frequency (TOF) of 1890 h–1, which is 4.4× higher than equivalent reactions without any diol (Catalyst/Diol/PA/CHO = 1:10–400:400:2000, 100 °C). In all cases, the catalysis is well controlled and highly ester linkage selective (ester linkages >99%) and operates effectively using bicyclic and/or biobased anhydrides with bicyclic or flexible alkylene epoxides. These catalysts are recommended for future production and application development using polyester polyols

Al(III)/K(I) Heterodinuclear Polymerization Catalysts Showing Fast Rates and High Selectivity for Polyester Polyols

Low molar mass, hydroxyl end-capped polymers, often termed “polyols,” are widely used to make polyurethanes, resins, and coatings and as surfactants in liquid formulations. Epoxide/anhydride ring-opening copolymerization (ROCOP) is a controlled polymerization route to make them, and its viability depends upon catalyst selection. In the catalysis, the polyester polyol molar masses and end-groups are controlled by adding specific but excess quantities of diols (vs catalyst), known as the chain transfer agent (CTA), to the polymerizations, but many of the best current catalysts are inhibited or even deactivated by alcohols. Herein, a series of air-stable Al(III)/K(I) heterodinuclear polymerization catalysts show rates and selectivity at the upper end of the field. They also show remarkable increases in activity, with good selectivity and control, as quantities of diol are increased from 10–400 equiv. The reactions are accelerated by alcohols, and simultaneously, their use allows for the production of hydroxy telechelic poly/oligoesters (400 Mn (g mol–1) Đ < 1.19). For example, cyclohexene oxide (CHO)/phthalic anhydride (PA) ROCOP, using the best Al(III)/K(I) catalyst with 200 equiv of diol, shows a turnover frequency (TOF) of 1890 h–1, which is 4.4× higher than equivalent reactions without any diol (Catalyst/Diol/PA/CHO = 1:10–400:400:2000, 100 °C). In all cases, the catalysis is well controlled and highly ester linkage selective (ester linkages >99%) and operates effectively using bicyclic and/or biobased anhydrides with bicyclic or flexible alkylene epoxides. These catalysts are recommended for future production and application development using polyester polyols

Thermoregulatory strategies of three reclusive lizards (genus Xantusia) from the Baja California peninsula, Mexico, under current and future microenvironmental temperatures

The thermal quality of the habitat is key for the regulation of body temperature in terrestrial ectotherms and, therefore, permits them to carry out their fundamental biological activities. In thermally heterogeneous environments, ectotherms might follow different behavioral or physiological strategies to maintain their body temperature within biologically adequate boundaries, for which they depend on microhabitat selection. These aspects are, thus, relevant in the context of habitat degradation and land-use change. In this study, we characterized the thermal ecology of three lizard species (genus Xantusia) that differ in microhabitat use along the Baja California peninsula, Mexico. We made three predictions: (1) the three species will follow different thermoregulatory strategies according to habitat thermal quality; (2) the thermal requirements and tolerances of these species will match the environmental or microenvironmental thermal conditions; and (3) due to their habitat and range restriction, the species studied will be highly vulnerable to climate change. Our results indicate the existence of thermoregulatory mechanisms in Xantusia to face thermal heterogeneity, including behavioral thermoregulation by choosing different microhabitats, shifts in activity periods, and adaptation to particular high thermal quality microhabitats. Furthermore, despite their association to specific microhabitats and specialized physiology, the studied species will not be adversely affected by climate change, as the increased microenvironmental temperatures will lead to a higher habitat thermal quality and lower costs of thermoregulation. However, we do not discard other indirect adverse effects of climate change not considered in this study.Fil: Arenas Moreno, Diego M.. Universidad Nacional Autónoma de México; MéxicoFil: Lara Resendiz, Rafael Alejandro. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Diversidad y Ecología Animal. Universidad Nacional de Córdoba. Facultad de Ciencias Exactas Físicas y Naturales. Instituto de Diversidad y Ecología Animal; ArgentinaFil: Domínguez Guerrero, Saúl F.. Universidad Nacional Autónoma de México; MéxicoFil: Pérez Delgadillo, Ana G.. Universidad Nacional Autónoma de México; MéxicoFil: Muñoz Nolasco, Francisco J.. Universidad Nacional Autónoma de México; MéxicoFil: Galina Tessaro, Patricia. Centro de Investigaciones Biologicas del Noroeste; MéxicoFil: Méndez de la Cruz, Fausto R.. Universidad Nacional Autónoma de México; Méxic