Использование двигателя-маховика для создания управляющих моментов космического аппарата

In this article we present a comprehensive study of microcrystalline silicon (PC-Si:H) p-i-n solar cells prepared by using plasma-enhanced chemical vapor deposition (PECVD) at 13.56 MHz excitation frequency. In the first step the cell development was performed in a small area PECVD reactor showing the relationship between the deposition process parameters and the resulting solar cell performance. Subsequent up-scaling to a substrate area of 30 X 30 cm confirmed the scalability of optimized deposition parameters to large area reactors. We investigated the deposition regime of high rf power P (rf) (0.25-0.7 W/cm(2)) and high deposition pressure P (dep) (1 - 11 Torr) for the muc-Si:H i layer. Furthermore, the influence of silane concentration and deposition temperature was studied. A transition between amorphous and microcrystalline growth could be achieved by a variation of either deposition pressure, plasma power, or silane concentration. The best microcrystalline silicon solar cells were prepared close to the transition to amorphous growth. A high deposition pressure was a prerequisite for obtaining, high quality material at a high growth rate. The best solar cell efficiencies achieved so far are 8.1% and 6.6% at i-layer growth rates of 5 and 10 Angstrom/s, respectively, for muc-Si:H single junction cells. Applied in a-Si:H/muc-Si:H tandem cells a stabilized efficiency of 10.0% was achieved. (C) 2002 American Vacuum Society

hMYH and hMTH1 cooperate for survival in mismatch repair defective T-cell acute lymphoblastic leukemia

hMTH1 is an 8-oxodGTPase that prevents mis-incorporation of free oxidized nucleotides into genomic DNA. Base excision and mismatch repair pathways also restrict the accumulation of oxidized lesions in DNA by removing the mis-inserted 8-oxo-7,8-dihydro-2'-deoxyguanosines (8-oxodGs). In this study, we aimed to investigate the interplay between hMYH DNA glycosylase and hMTH1 for cancer cell survival by using mismatch repair defective T-cell acute lymphoblastic leukemia (T-ALL) cells. To this end, MYH and MTH1 were silenced individually or simultaneously using small hairpin RNAs. Increased sub-G1 population and apoptotic cells were observed upon concurrent depletion of both enzymes. Elevated cell death was consistent with cleaved caspase 3 accumulation in double knockdown cells. Importantly, overexpression of the nuclear isoform of hMYH could remove the G1 arrest and partially rescue the toxicity observed in hMTH1-depleted cells. In addition, expression profiles of human DNA glycosylases were generated using quantitative reverse transcriptase–PCR in MTH1 and/or MYH knockdown cells. NEIL1 DNA glycosylase, involved in repair of oxidized nucleosides, was found to be significantly downregulated as a cellular response to MTH1–MYH co-suppression. Overall, the results suggest that hMYH and hMTH1 functionally cooperate for effective repair and survival in mismatch repair defective T-ALL Jurkat A3 cells

Microcrystalline silicon films and solar cells deposited by PECVD and HWCVD

The application of microcrystalline silicon (muc-Si:H) in thin-film solar cells is addressed in the present paper. Results of different technologies for the preparation of pc-Si:H are presented, including plasma enhanced chemical vapour deposition (PECVD) using 13.56MHz (radio frequency, rf) and 94.7MHz (very high frequency, vhf) and hot-wire chemical vapour deposition (HWCVD). The influence of the silane concentration (SC) on the material and solar cell parameters is studied for the different techniques as the variation of SC allows to optimise the solar cell performance in each deposition regime. The best performance of pc-Si:H solar cells is always observed near the transition to amorphous growth. The highest efficiency obtained so far at a deposition rate of 5 Angstrom/s is 9.4%, achieved with rf-PECVD in a deposition regime of using high pressure and high discharge power. High deposition rates and solar cell efficiencies could be also achieved by vhf-PECVD. An alternative approach represents the HWCVD which also demonstrated high deposition rates for muc-Si:H. However, good material quality and solar cell performance could only be achieved at low substrate temperatures and, consequently, low deposition rates. The pc-Si:H solar cells prepared by HWCVD exhibit comparably high efficiencies up to 9.4% and exceptionally high open circuit voltages up to 600mV but at lower deposition rates (approximate to1 Angstrom/s). The properties of PECVD and HWCVD solar cells are carefully compared. (C) 2004 Elsevier Ltd. All rights reserved