Coherence of a room-temperature CW GaAs/GaAlAs injection laser

The temporal coherence of a stripe-geometry double-heterojunction GaAs/GaAlAs laser operating CW at room temperature was determined. A heterodyne detection scheme was used involving the mixing of the laser field with a frequency-shifted and time-delayed image of itself in an interferometer. Because the laser device oscillated in several longitudinal modes, the autocorrelation function of its output exhibited resonances for specific time delays. The rate at which the amplitude of these resonances decreased with increasing time delays provided a measure of an apparent coherence length associated with individual longitudinal modes. The coherence length, so defined, was found to increase linearly with drive current in excess of threshold. This observation is interpreted as evidence that the intrinsic linewidth of a longitudinal mode is inversely proportional to the coherent optical power in that mode. Apparent coherence lengths were a few centimeters for a few milliwatts of total optical power emitted per facet. For a perfectly balanced interferometer, a sharp heterodyne beat signal was also observed when the laser device was operated considerably below threshold, i.e., in the LED mode

Zero-order filter for diffractive focusing of de Broglie matter waves

The manipulation of neutral atoms and molecules via their de Broglie wave properties, also referred to as de Broglie matter wave optics, is relevant for several fields ranging from fundamental quantum mechanics tests and quantum metrology to measurements of interaction potentials and new imaging techniques. However, there are several challenges. For example, for diffractive focusing elements, the zero-order beam provides a challenge because it decreases the signal contrast. Here we present the experimental realization of a zero-order filter, also referred to as an order-sorting aperture for de Broglie matter wave diffractive focusing elements. The zero-order filter makes it possible to measure even at low beam intensities. We present measurements of zero-order filtered, focused, neutral helium beams generated at source stagnation pressures between 11 and 81 bars. We show that for certain conditions the atom focusing at lower source stagnation pressures (broader velocity distributions) is better than what has previously been predicted. We present simulations with the software ray-tracing simulation package mcstas using a realistic helium source configuration, which gives very good agreement with our measurements

An ellipsoidal mirror for focusing neutral atomic and molecular beams

Manipulation of atomic and molecular beams is essential to atom optics applications including atom lasers, atom lithography, atom interferometry and neutral atom microscopy. The manipulation of charge-neutral beams of limited polarizability, spin or excitation states remains problematic, but may be overcome by the development of novel diffractive or reflective optical elements. In this paper, we present the first experimental demonstration of atom focusing using an ellipsoidal mirror. The ellipsoidal mirror enables stigmatic off-axis focusing for the first time and we demonstrate focusing of a beam of neutral, ground-state helium atoms down to an approximately circular spot, (26.8±0.5) μm×(31.4±0.8) μm in size. The spot area is two orders of magnitude smaller than previous reflective focusing of atomic beams and is a critical milestone towards the construction of a high-intensity scanning helium microscope

An ellipsoidal mirror for focusing neutral atomic and molecular beams

Manipulation of atomic and molecular beams is essential to atom optics applications including atom lasers, atom lithography, atom interferometry and neutral atom microscopy. The manipulation of charge-neutral beams of limited polarizability, spin or excitation states remains problematic, but may be overcome by the development of novel diffractive or reflective optical elements. In this paper, we present the first experimental demonstration of atom focusing using an ellipsoidal mirror. The ellipsoidal mirror enables stigmatic off-axis focusing for the first time and we demonstrate focusing of a beam of neutral, ground-state helium atoms down to an approximately circular spot, (26.8±0.5) μm×(31.4±0.8) μm in size. The spot area is two orders of magnitude smaller than previous reflective focusing of atomic beams and is a critical milestone towards the construction of a high-intensity scanning helium microscope

Epitaxy and magnetotransport of Sr_2FeMoO_6 thin films

By pulsed-laser deposition epitaxial thin films of Sr_2FeMoO_6 have been pre- pared on (100) SrTiO_3 substrates. Already for a deposition temperature of 320 C epitaxial growth is achieved. Depending on deposition parameters the films show metallic or semiconducting behavior. At high (low) deposition temperature the Fe,Mo sublattice has a rock-salt (random) structure. The metallic samples have a large negative magnetoresistance which peaks at the Curie temperature. The magnetic moment was determined to 4 mu_B per formula unit (f.u.), in agreement with the expected value for an ideal ferrimagnetic arrangement. We found an ordinary Hall coefficient of -6.01x10^{-10} m^3/As at 300 K, corresponding to an electronlike charge-carrier density of 1.3 per Fe,Mo-pair. In the semiconducting films the magnetic moment is reduced to 1 mu_B/f.u. due to disorder in the Fe,Mo sublattice. In low fields an anomalous holelike contribution dominates the Hall voltage, which vanishes at low temperatures for the metallic films only.Comment: Institute of Physics, University of Mainz, Germany, 4 pages, including 5 pictures and 1 Table, submitted to Phys. Rev.

A Model of Vertical Oligopolistic Competition

This paper develops a model of successive oligopolies with endogenous market entry, allowing for varying degrees of product differentiation and entry costs in both markets. Our analysis shows that the downstream conditions dominate the overall profitability of the two-tier structure while the upstream conditions mainly affect the distribution of profits. We compare the welfare effects of upstream versus downstream deregulation policies and show that the impact of deregulation may be overvalued when ignoring feedback effects from the other market. Furthermore, we analyze how different forms of vertical restraints influence the endogenous market structure and show when they are welfare enhancing

A solution to the misrepresentations of CO2-equivalent emissions of short-lived climate pollutants under ambitious mitigation

While cumulative carbon dioxide (CO2) emissions dominate anthropogenic warming over centuries, temperatures over the coming decades are also strongly affected by short-lived climate pollutants (SLCPs), complicating the estimation of cumulative emission budgets for ambitious mitigation goals. Using conventional Global Warming Potentials (GWPs) to convert SLCPs to “CO2-equivalent” emissions misrepresents their impact on global temperature. Here we show that peak warming under a range of mitigation scenarios is determined by a linear combination of cumulative CO2 emissions to the time of peak warming and non-CO2 radiative forcing immediately prior to that time. This may be understood by expressing aggregate non-CO2 forcing as cumulative CO2 forcing-equivalent (CO2-fe) emissions. We show further that contributions to CO2-fe emissions are well approximated by a new usage of GWP, denoted GWP*, which relates cumulative CO2 emissions to date with the current rate of emission of SLCPs. GWP* accurately indicates the impact of emissions of both long-lived and short-lived pollutants on radiative forcing and temperatures over a wide range of timescales, including under ambitious mitigation when conventional GWPs fail. Measured by GWP*,implementing the Paris Agreement would reduce the expected rate of warming in 2030 by 28% relative to a No Policy scenario. Expressing mitigation efforts in terms of their impact on future cumulative emissions aggregated using GWP* would relate them directly to contributions to future warming, better informing both burden-sharing discussions and long-term policies and measures in pursuit of ambitious global temperature goals

Perfect weddings abroad

Approximately 16% of UK couples are currently married abroad. However, academic or practitioner focused research that explores the complex nature of a couple’s buying preferences or the development of innovative marketing strategies by businesses operating within the weddings abroad niche sector, is almost non-existent. This exploratory paper examines the role and relevance of marketing within the weddings abroad sector. The complex nature of customer needs in this high emotional and involvement experience, are identified and explored. A case study of Perfect Weddings Abroad Ltd highlights distinctive features and characteristics. Social networking and the use of home-workers, with a focus on reassurance and handholding are important tools used to develop relationships with customers. These tools and techniques help increase the tangibility of a weddings abroad package. Clusters of complementary services that are synergistic and provide sources of competitive advantage are identified and an agenda for future research is developed

Perspectives on weak interactions in complex materials at different length scales

Nanocomposite materials consist of nanometer-sized quantum objects such as atoms, molecules, voids or nanoparticles embedded in a host material. These quantum objects can be exploited as a super-structure, which can be designed to create material properties targeted for specific applications. For electromagnetism, such targeted properties include field enhancements around the bandgap of a semiconductor used for solar cells, directional decay in topological insulators, high kinetic inductance in superconducting circuits, and many more. Despite very different application areas, all of these properties are united by the common aim of exploiting collective interaction effects between quantum objects. The literature on the topic spreads over very many different disciplines and scientific communities. In this review, we present a cross-disciplinary overview of different approaches for the creation, analysis and theoretical description of nanocomposites with applications related to electromagnetic properties