Observation of electron spin resonance of negative ions in liquid helium

Electron spin resonance signals of negative ions in liquid helium were observed. The line width and g-value were measured. Electrons injected into helium by field emission from ferromagnetic tips are shown to be polarized. A new technique for the measurement of electron spin polarization is presented

Data-driven Design of Engineering Processes with COREPROModeler

Enterprises increasingly demand IT support for the coordination of their engineering processes, which often consist of hundreds up to thousands of sub-processes. From a technical viewpoint, these sub-processes have to be concurrently executed and synchronized considering numerous interdependencies. So far, this coordination has mainly been accomplished manually, which has resulted in errors and inconsistencies. In order to deal with this problem, we have to better understand the interdependencies between the subprocesses to be coordinated. In particular, we can benefit from the fact that sub-processes are often correlated to the assembly of a product (represented by a product data structure). This information can be utilized for the modeling and execution of so-called data-driven process structures. In this paper, we present the COREPRO demonstrator that supports the data-driven modeling of these process structures. The approach explicitly establishes a close linkage between product data structures and engineering processes

Reflector antennas with low sidelobes, low cross polarization, and high aperture efficiency

Techniques are presented for computing the horn near field patterns on the subreflectors and for correcting the phase center errors of the horn pattern by shaping the subreflector surface. The diffraction pattern computations for scanned beams are described. The effects of dish aperture diffraction on pattern bandwidth are investigated. A model antenna consisting of a reflector, shaped subreflector, and corrugated feed horn is described

Modelling and Simulation of SF6 High-Voltage Circuit-Breakers - an Overview on Basics and Application of CFD Arc Simulation Tools

The paper gives an overview on the basics of CFD arc simulation tools with respect to the simulation of the fluid mechanical processes in the interrupter unit of SF6 high-voltage circuit-breakers at no-load and short-circuit switching-off processes. On the example of SF6 self-blast circuit-breakers the complete process from the analysis of the switching-off process to the creation of a modular simulation model consisting of several sub models is illustrated. Details to the modelling in the particular sub modules and to the implementation are given. The capability of a CFD arc simulation tool based on the program package ANSYS/FLUENT is demonstrated on the basis of selected simulation results. Furthermore case examples for the application of the presented CFD arc simulation tool in the development process of high-voltage circuit-breakers are given

A search for X-ray emission from rich clusters, extended halos around clusters, and superclusters

The all-sky data base acquired with the HEAO A-2 experiment was searched for X-ray emission on a variety of metagalactic size scales which were either predicted or previously detected. Results in the 0.2-60 keV energy range are presented. The optically richest clusters, including those from which a microwave decrement were observed, appear to be relatively underluminous in X-rays. Observations of Abell 576 show its luminosity to be less than earlier estimates, and moreover less than the luminosity predicted from its microwave decrement, unless the intracluster gas is a factor of approximately 10 hotter than in typical clusters. Near SC0627 there are two X-ray sources, and the identification of the dominant source with SCO627 is probably incorrect. New spectral observations of Abell 401 and 2147, possible superclusters, reveal that they have typical cluster spectra with iron line emission

Influence of Copper Vapors in SF6 Plasma

In this study a theoretical approach allows estimating the ablation mass flux of copper from a corrected Hertz-Knudsen flux. The influence of the copper vapours coming from the anode electrode to an SF6 plasma is studied in a simplified 2D configuration. Depending on the plasma pressure an ablation or a diffusion state is considered. The amount of copper versus time is presented. An RMS current I=10 kA is applied leading at t=10 ms to an amount of copper equal to 0.55 mg. The vapours change the plasma properties mainly the electrical conductivity and radiation and so the plasma behaviour. At time t=5 ms the electrode erosion leads to a copper plasma. This simple case shows the necessity to well consider the copper erosion in plasma modelling as in High Voltage Circuit Breaker (HVCB) where higher current are considered

X-Ray Scattering at FeCo(001) Surfaces and the Crossover between Ordinary and Normal Transitions

In a recent experiment by Krimmel et al. [PRL 78, 3880 (1997)], the critical behavior of FeCo near a (001) surface was studied by x-ray scattering. Here the experimental data are reanalyzed, taking into account recent theoretical results on order-parameter profiles in the crossover regime between ordinary and normal transitions. Excellent agreement between theoretical expectations and the experimental results is found.Comment: 9 pages, Latex, 1 PostScript figure, to be published in Phys.Rev.