99 research outputs found
Effect of chemicals treatment and fiber loading on mechanical properties of borassus (Toddy palm) fiber/epoxy composites
Abstract: The aim of the present study was to investigate and compare the mechanical properties of untreated and chemically modified Borassus fiber reinforced epoxy composites. Composites were prepared by hand lay-up process by reinforcing Borassus fibers with epoxy matrix. To improve the fiber-matrix adhesion properties, alkali (NaOH), and alkali combined with silane (3- aminopropyltriethoxysilane) treatments on the fibers surface were carried out. Examinations through Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) were conducted to investigate the structural and physical properties of the Borassus fibers. Tensile properties such as modulus and strength of the composites made by chemically modified and untreated Borassus fibers were studied using a Universal Testing Machine (UTM). Based on the experimental results, it was found that the tensile properties of the Borassus reinforced epoxy composites were significantly improved, as compared with the neat epoxy. It was also found that the fiber treated with combination of alkali and silane exhibited superior mechanical properties as compared with alkali and untreated fiber composites. The nature of fiber/matrix interface was examined through SEM of cryo-fractured samples. Chemical resistance of composites was also found to be improved with chemically modified fiber composites
Properties of cellulose/Thespesia Lampas short fibers bio-composite films
Abstract: Cellulose was dissolved in pre cooled environment friendly solvent (aq.7% sodium hydroxide+12% urea) and regenerated with 5%H2SO4 as coagulation bath. Using cellulose as matrix and alkali treated short natural fibers extracted from the newly identified Thespesia Lampas plant as reinforcement, the green composite films were prepared. The effect of fiber loading on the tensile properties and thermal stability was studied. The fractographs indicated better interfacial bonding between the fibers and cellulose. The crystallinity of the composite films was found to be lower than the matrix and decreased with increasing fiber content. In spite of better interfacial bonding, the tensile properties of the composites were found to be lower than those of the matrix and decreased with increasing fiber content and this behavior was attributed to the random orientation of the fibers in the composites. The thermal stability of the composite films was higher than the matrix and increased with fiber content
Extraction and characterization of novel lignocellulosic fibers from Thespesia lampas plant
In this work, the lignocellulosic fibers from the plant Thespesia lampas were extracted and investigated in detail. The prime objective of this work was to study the effect of alkali treatment on the chemical composition, tensile properties, morphological and structural changes, and thermal degradation of Thespesia lampas fibers. Chemical analysis, FT-IR, and 13C CP-MAS NMR spectroscopic studies indicated lowering of amorphous hemicellulose content on alkali treatment. Wide-angle X-ray diffraction studies indicated increase in crystallinity of the fibers on alkali treatment. The tensile strength and modulus of the fibers and thermal stability increased on alkali treatment. Scanning electron micrographs revealed roughening of the surface of the fibers due to the removal of the hemicellulose layer on alkali treatment. Tensile properties of Thespesia fibers were compared to those of other important natural fibers, and it was indicated as an alternative suitable source for composite construction
Tensile and thermal properties of poly(lactic acid)/eggshell powder composite films
Biodegradable composite films of poly(lactic acid) (PLA)=eggshell powder (ESP) were prepared by the composite film casting method using chloroform as the solvent. ESP was loaded in PLA in 1 to 5 wt.%. The films were subjected to tensile, FT-IR spectral, thermogravimetric, X-ray, and microscopic analyses. The tensile strength and modulus of the composite films were found to be higher than those of PLA and increased with ESP content up to 4 wt.% and then decreased. A reverse trend was observed in the case of percentage elongation at break. The X-ray diffractograms of the composite films indicated an increase in crystallinity with ESP content. The optical micrographs indicated uniform distribution of ESP particles in the composite films. However, the fractographs indicated agglomeration of ESP particles at 5 wt.% loading. The FT-IR spectra revealed no specific interactions between PLA and ESP. The thermal stability of the composite films increased with ESP content
Preparation and properties of biodegradable spent tea leaf powder/poly(propylene carbonate) composite films
Abstract: The aim of the present work is to develop novel biobased lightweight material with improved tensile and thermal properties. Spent tea leaf powder (STLP) is used as a filler to improve the tensile and thermal properties of polypropylene carbonate (PPC). Tea is an important material of hotels and household and spent tea leaf forms a conjugal solid waste. Composite films are obtained by solution casting method. These films are characterized by Optical microscopy, scanning electron microscopy, Fourier transforms infrared spectroscopy, thermogravimetric analysis and tensile testing to examine the effect of filler content on the properties of the composites. The results have shown that composite films are having increased tensile strength due to enhanced interfacial adhesion between the filler and the matrix. In addition, the composite films have also exhibited higher thermal degradation temperatures compared to pure polypropylene carbonate. The morphology results indicate that there is a good interface interaction between STLP and PPC. Results of the study reveal STLP to be a promising green filler for polymer plastics
Not Available
Not AvailableArunachal Pradesh, the largest mountainous state of India, is situated in the northeastern part of the Himalayan region and characterized by high annual rainfall, forest vegetation and diversity in soils. Information on the soils of the state is essential for scientific land use planning and sustainable production. A soil resource inventory and subsequent database creation for thematic mapping using a Geographical Information System (GIS) is presented in this paper. Physiographically, Arunachal Pradesh can be divided into four distinct zones: snow-capped mountains (5500 m amsl); lower Himalayan ranges (3500 m amsl); the sub-Himalayan Siwalik hills (700 m amsl); and the eastern Assam plains. Soils occurring in these physiographic zones are lnceptisols (37 percent), Entisols (35 per- cent), Ultisols (14 percent) and Alfisols (0.5 percent). The remaining soils can be classed as miscellaneous. Soil resource inventory studies show that the soils of the warm perhumid eastern Himalayan ecosystem, with a ‘thermic’ temperature regime, are lnceptisols and Entisols; and that they are highly acidic in nature. Soils of the warm perhumid Siwalik hill ecosystem, with a ‘hyperthermic’ temperature regime, are also Entisols and lnceptisols with a high to moderate acidic condition. The dominant soils of the northeastern Purvachal hill ecosystem, with ‘hyperthermic’ and ‘thermic’ temperature regimes, are Ultisols and Inceptisols. lnceptisols and Entisols are the dominant soils in the hot and humid plain ecosystem. Steeply sloping landform and high rainfall are mainly responsible for a high erosion hazard in the state. The soil erosion map indicates that very severe (20 percent of TGA) to severe (25 percent of TGA) soil erosion takes place in the warm per-humid zone, whereas, moderate erosion takes place in the Siwalik hills and hot, humid plain areas. This is evident from the soil depth class distribution of Arunachal Pradesh, which shows that shallow soils cover 20 percent of the TGA of the state. Most of the the state is covered by hills and agri- cultural practices are limited to valley regions, However, the soils of other physiographic zones (lower altitudinal, moderately hilly terrain) provide scope for plantations, such as orange, banana and tea plantations.Not Availabl
Galaxy Evolution in the Radio Band: The Role of Starforming Galaxies and Active Galactic Nuclei
We investigate the astrophysics of radio-emitting star-forming galaxies and active galactic nuclei (AGNs), and elucidate their statistical properties in the radio band including luminosity functions, redshift distributions, and
number counts at sub-mJy flux levels, that will be crucially probed by next-generation radio continuum surveys. Specifically, we exploit the model-independent approach by Mancuso et al. (2016a,b) to compute the star formation rate functions, the AGN duty cycles and the conditional probability of a star-forming galaxy to host an AGN with given bolometric luminosity. Coupling these ingredients with the radio emission properties associated to star formation and nuclear activity, we compute relevant statistics at different radio frequencies, and disentangle the relative con- tribution of star-forming galaxies and AGNs in different radio luminosity, radio flux, and redshift ranges. Finally, we highlight that radio-emitting star-forming galaxies and AGNs are expected to host supermassive black holes accreting with different Eddington ratio distributions, and to occupy different loci in the galaxy main sequence diagrams. These specific predictions are consistent with current datasets, but need to be tested with larger statistics via future radio data with multi-band coverage on wide areas, as it will become routinely achievable with the advent of the SKA and its precursors
A systematic review of non-hormonal treatments of vasomotor symptoms in climacteric and cancer patients
Extraction and Characterization of Calotropis gigantea Bast Fibers as Novel Reinforcement for Composites Materials
The aim of this study is to scrutinize the use of Calotropis gigantea bast fibers as potential reinforcement in polymer composites. The bast fibers were extracted from the Calotropis gigantea plant bark and some of them were treated with alkali (5Â wt.%) solution. The chemical composition, physico-chemical structural properties of the untreated and the alkali treated Calotropis bast fibers were studied. The results of chemical composition analysis indicated that alkali treatment removed most of the non-cellulose materials as confirmed by the FTIR analysis. The X-ray diffraction results exhibited that the crystallinity index of the alkali treated fibers increased in comparison with the untreated fibers, which agrees with the results obtained in the mechanical tests. The tensile strength and modulus of the alkali treated fibers were found to be higher whereas the elongation at break was lower than the untreated fibers. Thermal stability of alkali treated fibers was lower than that of the untreated fiber. Scanning electron micrographs showed roughening of the surface of the fiber due to the removal of the surface impurities and non-cellulosic components on alkali treatment.It can be concluded that alkali treatment is an effective method to improve the surface and mechanical properties of Calotropis bast fibers to be used in composite materials
Extraction, chemical composition, morphology and characterization of cellulose microfibrils from ficus leaves
In this work, we successfully extracted cellulose microfibrils from ficus leaves adopting the acidchlorite, alkaline and acid hydrolysis process. Chemical analysis, scanning electron microscopy (SEM), Fourier transform infrared (FTIR), nuclear magnetic resonance (NMR) spectroscopic studies, wide angle X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were used to characterize the extracted fibers and cellulose microfibrils from ficus leaves. The chemical analysis results revealed an increase in -cellulose content and decrease in lignin and hemicelluloses for the cellulose microfibrils over raw fibers. The FTIR and NMR spectroscopic studies indicated that the extractives, lignin and hemicellulose were removed extensively from the raw fibers during extraction of cellulose microfibrils. Crystallinity determined by Wide angle X-ray diffraction method and the studies reveal that extracted cellulose microfibrils were more crystalline than the raw fibers. The extracted cellulose microfibrils obtained from raw fibers had good thermal stability. Structural and surface analysis of the microfibrils showed a reduction in diameter and changes in surface morphology from that of the raw fibers. The extracted cellulose microfibrils appeared to be suitable for industrial applications such as reinforcing filler for biocomposites, raw material for paper pulp and bio fuel
- …