Dislocation nucleation in shocked fcc solids: effects of temperature and preexisting voids

Quantitative behaviors of shock-induced dislocation nucleation are investigated by means of molecular dynamics simulations on fcc Lennard-Jones solids: a model Argon. In perfect crystals, it is found that Hugoniot elastic limit (HEL) is a linearly decreasing function of temperature: from near-zero to melting temperatures. In a defective crystal with a void, dislocations are found to nucleate on the void surface. Also HEL drastically decreases to 15 percent of the perfect crystal when a void radius is 3.4 nanometer. The decrease of HEL becomes larger as the void radius increases, but HEL becomes insensitive to temperature.Comment: 4 pages. (ver.2) All figures have been revised. Two citations are newly added. Numerical unit is unified in the context of solid argon. (ver. 3) A minor revision including new reference

New data on the kinetics and governing factors of the spall fracture of metals

This paper presents two examples of significant departures from usual trends of varying the resistance to spall fracture (spall strength) with changing loading history, load duration and peak shock stress. In experiments with vanadium single crystals we observed an important decrease of spall strength when increasing the shock stress. This was interpreted in terms of disruption of the matter homogeneity as a result of its twinning at shock compression. In experiments with 12Kh18N10T austenitic stainless steel we observed a sharp increase of recorded spall strength value when short load pulses of a triangular profile were replaced by shock pulses of long duration having a trapezoidal shape. This anomaly is associated with formation of the deformation-induced martensitic phase

Spall fracture and twinning in laser shock-loaded single-crystal magnesium

As a major failure process in materials subjected to dynamic loading, spall fracture is one of the most widely studied issues in shock physics. To investigate its dependence on the microstructure, including both initial and shock-induced features, laser shock experiments were performed on single crystal magnesium. Shock loading was applied in directions parallel and perpendicular to the c-axis of the crystals. Both the spall strength and the fracture surface morphology are found to depend on the direction of the shock application with respect to crystal orientations. The results complement data obtained previously over ranges of lower strain rates. A detailed analysis of the residual microstructure and crack patterns in the recovered samples shows strong correlations between damage localization and twins, both pre-existing and shock-induced. Thus, cracks match specific twinning directions, which is discussed on the basis of deformation mechanisms reported under quasi-static loading conditions, either prismatic slip or twinning depending on local orientations

Response of Seven Crystallographic Orientations of Sapphire Crystals to Shock Stresses of 16 to 86 GPa

Shock-wave profiles of sapphire (single-crystal Al2O3) with seven crystallographic orientations were measured with time-resolved VISAR interferometry at shock stresses in the range 16 to 86 GPa. Shock propagation was normal to the surface of each cut. The angle between the c-axis of the hexagonal crystal structure and the direction of shock propagation varied from 0 for c-cut up to 90 degrees for m-cut in the basal plane. Based on published shock-induced transparencies, shock-induced optical transparency correlates with the smoothness of the shock-wave profile. The ultimate goal was to find the direction of shock propagation in sapphire that is most transparent as a window. Particle velocity histories were recorded at the interface between a sapphire crystal and a LiF window. In most cases measured wave profiles are noisy as a result of heterogeneity of deformation. Measured values of Hugoniot Elastic Limits (HELs) depend on direction of shock compression and peak shock stress. The largest HEL values were recorded for shock loading along the c-axis and perpendicular to c along the m-direction. Shock compression along the m- and s-directions is accompanied by the smallest heterogeneity of deformation and the smallest rise time of the plastic shock wave. m- and s-cut sapphire most closely approach ideal elastic-plastic flow, which suggests that m- and s-cut sapphire are probably the orientations that remains most transparent to highest shock pressures. Under purely elastic deformation sapphire has very high spall strength, which depends on load duration and peak stress. Plastic deformation of sapphire causes loss of its tensile strength.Comment: 18 pages, 18 figure

Peculiarities of evolutions of elastic-plastic shock compression waves in different materials

In the paper, we discuss such unexpected features in the wave evolution in solids as strongly nonlinear uniaxial elastic compression in a picosecond time range, a departure from self-similar development of the wave process which is accompanied with apparent sub-sonic wave propagation, changes of shape of elastic precursor wave as a result of variations in the material structure and the temperature, unexpected peculiarities of reflection of elastic-plastic waves from free surface

Modelling of the Mechanical Behaviour of Ultra-Fine Grained Titanium Alloys at High Strain Rates

Results of numerical simulations of the mechanical behaviour of coarse grained and UFG titanium alloys under quasi-static uniaxial compression and plane shock wave loading are presented in this paper. Constitutive equations predict the strain hardening behaviour, the strain rate sensitivity of the flow stress and the temperature softening of titanium alloys with a range of grain sizes from 20 µm to 100 nm. Characteristics of the mechanical behaviour of UFG a and a+ß titanium alloys in wide range of strain rates are discussed

The Mechanical Behaviour of Ultra Fine Grained Titanium Alloys at High Strain Rates

Within this study the mechanical behaviour of ultra-fine grained Ti-6-22-22S titanium alloy was investigated and compared to coarse grained material. By severe plastic deformation using the cyclic channel die compression process, grain sizes between 300 and 500 nm were obtained. The mechanical behaviour was studied over a wide range of strain rates from 10^(-3) - 107 s^(-1) under compressive loading using different experimental techniques. A significant increase of flow stress with decreasing grain size compared to the coarse grain state was found. An evaluation of the strain hardening behaviour of the UFG material shows a significant increase of the strain hardening coefficient at high strain rates for low plastic deformation. The strain rate sensitivity of the material is found to be constant within a range of strain rates from 10^(-3) to 106 s^(-1) but increases at higher plastic strains. However, compressive deformability is nearly constant up to 102 s-1 and decreased disproportionately at higher rates of strain. With decreasing grain size a significant decrease of compressive deformability was found. The strength at failure is increased with increasing strain rate

Shock-induced structures in copper

Shock loading of M3 copper within strain rate range of 5·10 6-5,7·10 6 s -1 reveals a nucleation of structural objects of 5-30 µm in diameter, which present the three dimensional frameworks composed from shear bands of 50-200 nm spacing. The structures are shown to be nucleated by means of interference of longitudinal and periphery release waves. Transition of the material into structure unstable state responsible for the shear banding happens when rate of change of the velocity variance at the mesoscale becomes higher than the rate of change of the mean particle velocity. The sites of nucleation of 3D-structures are speculated to be the staking faults generated under action of chaotic velocity pulsations relevant to dynamic deformation. The physical model for formation of 3D-structures takes into account the intersection of the partial dislocations and Lomer - Cottrell barriers