Experimental and numerical study of elasto-inertial focusing in straight channels.

Elasto-inertial microfluidics has drawn significant attention in recent years due to its enhanced capabilities compared to pure inertial systems in control of small microparticles. Previous investigations have focused mainly on the applications of elasto-inertial sorting, rather than studying its fundamentals. This is because of the complexity of simulation and analysis, due to the presence of viscoelastic force. There have been some investigative efforts on the mechanisms of elasto-inertial focusing in straight channels; however, these studies were limited to simple rectangular channels and neglected the effects of geometry and flow rates on focusing positions. Herein, for the first time, we experimentally and numerically explore the effects of elasticity accompanying channel cross-sectional geometry and sample flow rates on the focusing phenomenon in elasto-inertial systems. The results reveal that increasing the aspect ratio weakens the elastic force more than inertial force, causing a transition from one focusing position to two. In addition, they show that increasing the angle of a channel corner causes the elastic force to push the particles more efficiently toward the center over a larger area of the channel cross section. Following on from this, we proposed a new complex straight channel which demonstrates a tighter focusing band compared to other channel geometries. Finally, we focused Saccharomyces cerevisiae cells (3-5 μm) in the complex channel to showcase its capability in focusing small-size particles. We believe that this research work improves the understanding of focusing mechanisms in viscoelastic solutions and provides useful insights into the design of elasto-inertial microfluidic devices

Cross-sectional analysis of baseline differences of candidates for rotator cuff surgery: a sex and gender perspective

<p>Abstract</p> <p>Background</p> <p>The word "sex" refers to biological differences between men and women. Gender refers to roles, behaviors, activities, and attributes that a given society considers appropriate for men and women. Traditionally, treatment decisions have been based on patient's sex without including the gender. Assessment of disability secondary to musculoskeletal problems would not be complete or accurate unless potentially relevant biological and non-biological aspects of being a man or woman are taken into consideration. The purposes of this study were to: 1) investigate the difference in pre-operative characteristics between men and women who were candidates for rotator cuff surgery; and, 2) assess the relationship between level of disability and factors that represent sex and factors that signify gender.</p> <p>Method</p> <p>This was a cross-sectional study. The primary outcome measure of disability was a disease-specific outcome measure, the Western Ontario Rotator Cuff (WORC) index, and independent variables were sex, age, hand dominance, shoulder side involvement, BMI, co-morbidity, medication use, work status, smoking habits, strength, range of motion, level of pathology, concurrent osteoarthritis, expectations for recovery, and participation restriction. Parametric, non-parametric, univariable, subgroup, and multivariable analyses were conducted.</p> <p>Results</p> <p>One hundred and seventy patients were included in the study. The mean age was 57 ± 11, 85 were females. Women reported higher levels of disability despite similar or lower levels of pathology. Scores of the WORC were strongly influenced by factors that represented "gender" such as participation restriction (F = 28.91, p < 0.0001) and expectations for improved activities of daily living (F = 5.80, p = 0.004). Painfree combined range of motion, which represented an interaction between "sex" and "gender" was also associated with disability after being adjusted for all other relevant baseline factors (F = 25.82, p < 0.0001).</p> <p>Conclusion</p> <p>Gender-related factors such as expectations and participation limitations have an independent impact on disability in men and women undergoing rotator cuff related surgery.</p

A new nickel-based co-crystal complex electrocatalyst amplified by NiO dope Pt nanostructure hybrid; a highly sensitive approach for determination of cysteamine in the presence of serotonin.

A highly sensitive electrocatalytic sensor was designed and fabricated by the incorporation of NiO dope Pt nanostructure hybrid (NiO-Pt-H) as conductive mediator, bis (1,10 phenanthroline) (1,10-phenanthroline-5,6-dione) nickel(II) hexafluorophosphate (B,1,10,P,1,10, PDNiPF6), and electrocatalyst into carbon paste electrode (CPE) matrix for the determination of cysteamine. The NiO-Pt-H was synthesized by one-pot synthesis strategy and characterized by XRD, elemental mapping analysis (MAP), and FESEM methods. The characterization data, which confirmed good purity and spherical shape with a diameter of ⁓ 30.64 nm for the synthesized NiO-Pt-H. NiO-Pt-H/B,1,10, P,1,10, PDNiPF6/CPE, showed an excellent catalytic activity and was used as a powerful tool for the determination of cysteamine in the presence of serotonin. The NiO-Pt-H/B,1,10, P,1,10, PDNiPF6/CPE was able to solve the overlap problem of the two drug signals and was used for the determination of cysteamine and serotonin in concentration ranges of 0.003-200 µM and 0.5-260 µM with detection limits of 0.5 nM and 0.1 µM, using square wave voltammetric method, respectively. The NiO-Pt-H/B,1,10,P,1,10,PDNiPF6/CPE showed a high-performance ability for the determination of cysteamine and serotonin in the drug and pharmaceutical serum samples with the recovery data of 98.1-103.06%

Harnessing the power of metal-organic frameworks to develop microplastic fouling resistant forward osmosis membranes

With the gradual increase of microplastics (MPs) in water and wastewater streams, it is imperative to investigate their removal using tertiary treatment systems to minimize and preferably prevent their entrance into aquatic environments. Forward osmosis (FO) is a non-pressurized membrane process with potential applications in MPs removal from wastewater. However, efficient application of FO systems relies on developing high-performance FO membranes with low fouling tendency. MPs are proven as emerging foulants in membrane systems, diminishing their performance and lifetime and this highlights the need to consider MP fouling in developing sustainable membranes. The current study focuses on a novel modification of thin film composite (TFC) FO membranes by MIL-53(Fe) as a water-stable and hydrophilic metal-organic framework. Experimental results demonstrated that the optimized FO membrane (0.2 wt% MIL-53(Fe)) achieved a significantly higher water flux (90% increase) with a 23% less reverse salt flux. The modified membrane also had significantly less flux decline in fouling experiments and higher flux recovery after physical cleaning compared to the control membrane affirming its higher antifouling efficiency. MIL-53(Fe) integration in the FO substrate proved to be a practical method for developing high-performance TFC FO membranes with improved antifouling properties against MPs and organic foulants

Fabrication of unconventional inertial microfluidic channels using wax 3D printing.

Inertial microfluidics has emerged over the past decade as a powerful tool to accurately control cells and microparticles for diverse biological and medical applications. Many approaches have been proposed to date in order to increase the efficiency and accuracy of inertial microfluidic systems. However, the effects of channel cross-section and solution properties (Newtonian or non-Newtonian) have not been fully explored, primarily due to limitations in current microfabrication methods. In this study, we overcome many of these limitations using wax 3D printing technology and soft lithography through a novel workflow, which eliminates the need for the use of silicon lithography and polydimethylsiloxane (PDMS) bonding. We have shown that by adding dummy structures to reinforce the main channels, optimizing the gap between the dummy and main structures, and dissolving the support wax on a PDMS slab to minimize the additional handling steps, one can make various non-conventional microchannels. These substantially improve upon previous wax printed microfluidic devices where the working area falls into the realm of macrofluidics rather than microfluidics. Results revealed a surface roughness of 1.75 μm for the printed channels, which does not affect the performance of inertial microfluidic devices used in this study. Channels with complex cross-sections were fabricated and then analyzed to investigate the effects of viscoelasticity and superposition on the lateral migration of the particles. Finally, as a proof of concept, microcarriers were separated from human mesenchymal stem cells using an optimized channel with maximum cell-holding capacity, demonstrating the suitability of these microchannels in the bioprocessing industry

Mini-Exon Genotyping of Leishmania Species in Khuzestan Province, Southwest Iran

Background: Leishmaniasis is a protozoan disease cause by Leishmania genus. Anthroponotic and zoonotic cutaneous leishmaniasis are endemic in Iran. The aim of this study was to identify the causative agent of cutaneous leishmaniasis by mini-exon gene in five regions of Khuzestan Province, southwest of Iran. Methods: From 2007 to 2008 in this cross-sectional study, cutaneous samples were collected from patients referred to Health Centers and Hospitals of the Khuzestan Province for cutaneous leishmaniasis diagnosis and cultured in Novy-MacNeal-Nicolle (NNN) and RPMI 1640. The propagated promastigotes were harvested and Leishmania species of cutaneous leishmaniasis were identified by RFLP and DNA sequencing of the PCR generated fragments. Results: L. major and L. tropica were the causative agents of cutaneous leishmaniasis by predominantly of L. major species. The alignment of the mini-exon sequencing isolates with reported sequencing of L. major and L. tropica revealed 92-99 identity. Conclusion: Our study showed that mini-exon PCR-RFLP was useful method to identify the causative species of cutaneous leishmaniasis

Disability and satisfaction after Rotator Cuff decompression or repair: a sex and gender analysis

<p>Abstract</p> <p>Background</p> <p>Rotator-cuff pathology is the most common cause of pain and disability in the shoulder. Examining the combined effect of biological and societal factors on disability would potentially identify existing differences between men and women with rotator cuff pathology which would help to provide suggestions for better models of care. Purpose of this study was to determine the overall differences in disability between men and women and to examine the relationship between factors that represent sex (biological factors) and gender (non-biological factors) with disability and satisfaction with surgical outcome 6 months after rotator cuff surgery.</p> <p>Methods</p> <p>Patients with impingement syndrome and/or rotator cuff tear who underwent rotator cuff surgery completed the Western Ontario Rotator Cuff (WORC) index, the American Shoulder & Elbow Surgeons (ASES) assessment form, and the Quick Disabilities of the Arm, Shoulder and Hand (QuickDASH) outcome measures prior to surgery and 6 months post-operatively. They also rated their satisfaction with surgery at their follow-up appointment.</p> <p>Results and Discussion</p> <p>One hundred and seventy patients entered into the study (85 men and 85 women). One hundred and sixty patients (94%) completed the 6-month assessment. Women reported more disability both prior to and after surgery. Disability at 6 months was associated with pain-limited range of motion, participation limitation, age and strength. Satisfaction with surgery was associated with level of reported disability, expectations for improved pain, pain-limited range of motion and strength.</p> <p>Conclusions</p> <p>The results of this study indicate that women with rotator cuff pathology suffer from higher levels of pre- and post-operative disability and sex and gender qualities contribute to these differences. Gender-sensitive approach will help to identify existing differences between men and women which will help to promote more effective and tailored care by health professionals.</p

Incorporation of Natural Lithium-Ion Trappers into Graphene Oxide Nanosheets

© 2020 Wiley-VCH GmbH Lithium consumption is estimated to face a considerable rise in the next decade; thus, finding new reproducible lithium resources such as brine deposits and seawater has become a fast-growing research topic. However, Li+ extraction from these resources is challenging due to its low concentration and presence of other monovalent cations exhibiting identical chemical properties. Here, it is discovered that tannic acid (TA) inside graphene oxide (GO) nanochannel acts as natural ion trapper, which possesses lithiophilic elements. The lithium-rich feed is achieved by using the potential-driven TA-GO membrane by excluding lithium ions from other monovalent cations. The results showed that the ion trapping capability of inexpensive TA-GO membrane is Li+ > Na+ > K+ with Li trapping energy of −593 KJ mol−1, respectively, where its trapping efficiency goes into a top rank among their expensive synthetic counterparts. Evaluating the combined effect of three key parameters, including barrier energy, hydration energy, and binding energy illustrates that required energy to transport Li-ion through the membrane is higher than that for other monovalent. This proof-of-concept work opens up an avenue of research for designing a new class of ion-selective membranes, based on the incorporation of naturally low cost available lithiophilic guest molecules into 2D membranes

Molecular characterization of the Iranian isolates of Giardia lamblia: Application of the glutamate dehydrogenase gene

Background: This study was conducted to determine of molecular epidemiology of the Giardia lamblia by PCR-RFLP method in Tehran, capital of Iran. Methods: Thirty eight stool samples were randomly selected from 125 patients diagnosed with giardiasis using microscopy in Tehran. DNA extraction of some samples were performed by phenol/chloroform/isoamyl alcohol method and to raise the sensitivity of the PCR assay, the genomic DNA of the others were extracted using glass beads and the QIAamp Stool Mini Kit in order to effectively remove the PCR inhibitors. A single step PCR-RFLP assay, targeting the glutamate dehydrogenase (gdh) locus, was used to differentiate within and between assemblages A and B that have been found in humans. Results: Of the 38 isolates, 33 samples (87) were found as G. lamblia (genotype AII), 3 (7.8) belonged to assemblage B, genotype BIII, the mixed of genotype AII and B were detected only in two samples (5.2). Conclusions: PCR-RFLP is a sensitive and powerful analytical tool that allows effective genotype discrimination within and between assemblages at targeting gdh gene, and makes it possible to identify the presence of mixed genotypes. Our data suggest that there is an anthroponotic origin of the infection route, assemblage A group II, in Tehran so it seems that the main reservoir of Giardia infection is humans in the area studies