52 research outputs found

    ARTERY FIRST TECHNIQUE FOR MANAGEMENT OF ABERRANT HEPATIC ARTERIAL ANATOMY DURING PANCREATICODUODENECTOMY-EXPERIENCE FROM A SPECIALIZED HEPATO-PANCREATO-BILIARY UNIT

    Get PDF
    Purpose: Aberrant hepatic arterial anatomy poses a challenge for surgeon during pancreaticoduodenectomy (PD). These anomalies are best picked up on pre-operative imaging to avoid inadvertent injury to the aberrant vasculature resulting in liver ischaemia or biliary-enteric anastomotic failure. We present our experience of dealing with aberrant hepatic vessels during PD. Methods: Patients with aberrant hepatic vasculature who underwent PD between September 2014 and August 2015 were included in the study. We used artery rst technique for dissection in cases identified on pre operative imaging. Aberrations were classed according to Hiatt classi cation. Results: A total of 23 PD were performed with aberrant arterial anatomy in 10 (43%) cases. These vessels were recognised and preserved in nine cases. In one patient, the replaced right hepatic artery (RRHA) arising from superior mesenteric artery (SMA) was coursing through pancreatic parenchyma needing resection and reconstruction with uneventful post-operative recovery. We also identified one RRHA arising from SMA coursing lateral to common bile duct and entering liver parenchyma in gallbladder fossa. Conclusion: Aberrant hepatic arterial anomalies are common and should ideally be picked up by pre-operative imaging. It is possible to preserve these vessels in most cases with careful surgical dissection using artery first technique. Surgeons performing PD should be well versed with the aberrant vascular anatomy to minimise any inadvertent damage. Key words: Aberrant hepatic artery, artery first technique, pancreaticoduodenectomy

    Associated health risks from heavy metal-laden effluent into point drainage channels in Faisalabad, Pakistan

    Get PDF
    Industrial effluent discharge has increased due to rapid urbanization and industrialization. Irrational use of this water for irrigation has caused environmental and health issues. The objective of the current study is to evaluate the treated effluents of textile, ghee and chemical industries for major heavy metals (Cd, Cr, Ni, Pb and Fe) and other basic analysis (pH, EC, TSS and TDS). Effluent samples were collected from the discharge of industries entering into main wastewater collecting channel located in Faisalabad city. Heavy metals contents were determined via atomic absorption spectrophotometry. Results showed that the highest pH (11.06) was recorded in textile effluent while EC (7.89mS/cm), TSS (1185.55mg/L) and TDS (6317.33mg/L) were found highest in chemical industrial effluents. Heavy metals contents were determined through atomic absorption spectrophotometer. The mean comparison of heavy metal concentration (mg/L) showed the concentration of Cd, Cr and Ni were within the safe limits; however, Fe and Pb were higher than the safe limits in all industrial effluents. The highest/unsafe concentration of metal Fe was recorded 4.093, 2.979 and 2.959 mg/L in the effluents of chemical, textile and ghee mill respectively. While the highest/unsafe concentration of metal Pb was recorded 0.643, 0.578 and 0.286 mg/L in the effluents of textile, chemical and ghee mill respectively. The permissible limits of heavy metals Fe and Pb is 0.5 and 2 mg/L respectively. We conclude that before discharge into a receiving stream, the effluents must be treated more time with a treatment method that removes Pb and Fe within standard limits else the discharge will pose pollution and health risks to human beings

    Abiotic Stresses Management in Citrus

    Get PDF
    Citrus production is affected globally by several environmental stresses. Some citrus-producing regions suffer from severe ecological abiotic stresses, including cold, soil salinity and sodicity, extreme temperature, and drought. These abiotic stresses can alleviate the growth, fruit yield, and quality of citrus. Strategies that attempt to sustain and increase tolerance of citrus against the negative effect of abiotic stresses are the use of antiperspirant compounds, phytohormones, synthetic and natural growth regulators, soil and plant moisture retaining tools and structures, nutrition management, application of organic fertilizers, rootstocks breeding in citriculture, and others. These strategies increase the yield and growth of the plant along with the relative improvement of the fruit quality during the growth and fruiting period, increasing the absorption of water and nutrients, the extensive accumulation of osmolytes and the increase of antioxidant enzymes, changes in the amount of signaling substances, and the expression of genes under stress, increase tolerance to abiotic stresses in citrus fruits. In this review, we tried to provide a summary of the abiotic stress management in citrus by literature

    Methane decomposition for hydrogen production over biomass fly ash-based CeO2 nanowires promoted cobalt catalyst

    Get PDF
    In this work, the biomass fly ash (BFA) was investigated as a potential catalyst for the thermo-catalytic decomposition of methane and attractive approach for hydrogen (H-2) production. The BFA based CeO2 nanowires promoted cobalt catalyst was synthesized for catalytic methane (CH4) decomposition and was tested in a fixed bed reactor. The physicochemical properties of the catalyst were investigated using various techniques such as X-ray powder diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, thermal gravimetric analysis, and Fourier transformed infrared. The pure crystalline micro-flake BFA was modified using synthesized CeO2 nanowires and the resulted micro flakes cross-linked with nanowires shown thermal stability up to 900 degrees C. The high stability of the catalyst makes it suitable for the thermal catalytic decomposition of methane. The activity of the catalyst was tested at 850 degrees C to analyze the H-2 production and CH4 conversion. The obtained results revealed that support and promoter exhibit a strong impact on the CH4 conversion and H-2 yield in catalyst screening tests. A maximum conversion of 71% for CH4 with 44.9% H-2 yield was recorded for 34 h on stream activity while using 5% Co/CeO2-BFA as the catalyst. While BFA and Co-BFA as catalyst showed 36% and 47% conversion of CH4, respectively which indicates that the addition of promoter shows an increase in values of both conversion of CH4 and H-2 yield. Compared to traditional catalyst support, the use of waste-sourced catalyst support for CH4 decomposition provides a greener and more economical route for H-2 production

    Synergistic Interaction of Rhizobium tropici, Rhizophagus irregularis and Serendipita indica in Promoting Snap Bean Growth

    Get PDF
    The overuse of chemical pesticides and fertilizers in crop farming has led to a decrease in crop quality and negative impacts on soil and the environment. It is crucial to adopt alternative strategies to maintain soil and environmental quality while enhancing crop growth and yield. To explore this, a study was conducted under greenhouse conditions to investigate the effect of Rhizobium tropici CIAT 899 alone, as well as in association with mycorrhizae (Rhizophagus irregularis) and endophytic fungus (Serendipita indica), on the growth, yield, and nutrient status of snap bean plants. At harvest, the rhizobial strain CIAT 899 demonstrated the highest effectiveness. It significantly increased the number of nodules in both Contender and Garrafal Enana varieties by 6.97% and 14.81%, respectively, compared with the control without inoculation. Furthermore, the results indicated that co-inoculation of Rhizobium and symbiotic fungi had positive effects on nitrogen content, phosphorus availability, and overall plant growth. Regardless of the variety, plants inoculated with R. tropici CIAT 899 and Serendipita indica exhibited the highest values for plant growth parameters. This combination resulted in 168% and 135% increases in root dry biomass, as well as 140% and 225% increases in the number of pods for Contender and Garrafal Enana, respectively, compared with the control at harvest. Additionally, this study highlights the potential benefits of combining R. tropici with either Serendipita indica or Rhizophagus irregularis in terms of nitrogen and phosphorus uptake. These symbiotic microorganisms demonstrated synergistic interactions with snap bean plants, leading to improved mineral nutrition and enhanced growth. Overall, these findings suggest that utilizing these symbiotic microorganisms can effectively enhance the mineral nutrition and growth of snap bean plants.info:eu-repo/semantics/publishedVersio

    An Enhanced Backbone-Assisted Reliable Framework for Wireless Sensor Networks

    Get PDF
    An extremely reliable source to sink communication is required for most of the contemporary WSN applications especially pertaining to military, healthcare and disaster-recovery. However, due to their intrinsic energy, bandwidth and computational constraints, Wireless Sensor Networks (WSNs) encounter several challenges in reliable source to sink communication. In this paper, we present a novel reliable topology that uses reliable hotlines between sensor gateways to boost the reliability of end-to-end transmissions. This reliable and efficient routing alternative reduces the number of average hops from source to the sink. We prove, with the help of analytical evaluation, that communication using hotlines is considerably more reliable than traditional WSN routing. We use reliability theory to analyze the cost and benefit of adding gateway nodes to a backbone-assisted WSN. However, in hotline assisted routing some scenarios where source and the sink are just a couple of hops away might bring more latency, therefore, we present a Signature Based Routing (SBR) scheme. SBR enables the gateways to make intelligent routing decisions, based upon the derived signature, hence providing lesser end-to-end delay between source to the sink communication. Finally, we evaluate our proposed hotline based topology with the help of a simulation tool and show that the proposed topology provides manifold increase in end-to-end reliability

    Design and Implementation of an Architectural Framework for Web Portals in a Ubiquitous Pervasive Environment

    Get PDF
    Web Portals function as a single point of access to information on the World Wide Web (WWW). The web portal always contacts the portal’s gateway for the information flow that causes network traffic over the Internet. Moreover, it provides real time/dynamic access to the stored information, but not access to the real time information. This inherent functionality of web portals limits their role for resource constrained digital devices in the Ubiquitous era (U-era). This paper presents a framework for the web portal in the U-era. We have introduced the concept of Local Regions in the proposed framework, so that the local queries could be solved locally rather than having to route them over the Internet. Moreover, our framework enables one-to-one device communication for real time information flow. To provide an in-depth analysis, firstly, we provide an analytical model for query processing at the servers for our framework-oriented web portal. At the end, we have deployed a testbed, as one of the world’s largest IP based wireless sensor networks testbed, and real time measurements are observed that prove the efficacy and workability of the proposed framework
    • …
    corecore